[Sun Oct 16 04:46:42 2011] Detection parameters:
  Position = (515.2, 444.2) = 1 11 40.27 8 56 11.3
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 130.4 +/- 11.4
  Background counts = 0.6
  Rate = 0.007 +/- 0.0006

[Sun Oct 16 04:46:45 2011] Off-axis axis estimate = 3.05'
[Sun Oct 16 04:47:29 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 04:47:29 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sun Oct 16 04:47:29 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.040
[Sun Oct 16 04:47:29 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.59"
[Sun Oct 16 04:47:30 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass0_src2.ximg exists
[Sun Oct 16 04:47:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03256_pi14-548_cl_pass0_src2.csv
[Sun Oct 16 04:47:30 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass0_src2_1.ximg exists
[Sun Oct 16 04:47:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03256_pi14-548_cl_pass0_src2.csv
[Sun Oct 16 04:47:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03256_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03256_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 04:47:30 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun Oct 16 04:47:30 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Oct 16 04:47:30 2011] Fit fullrun_ccd3_acisf03256_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Oct 16 04:47:40 2011] Spatial fit model total counts = 132.393000, observed total counts = 133.000000
[Sun Oct 16 04:47:40 2011] Offset between fit and detection position for source 1 = 0.693046 pixels
[Sun Oct 16 04:47:40 2011] 133.097580 total counts/ 9.997580 bgd. counts: snr = 38.932349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.693046 pixels
  Position = (515.7, 444.7) = 1 11 40.28 8 56 11.3
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 123.1 +/- 11.5
  Background counts = 10.0
  Rate = 0.006 +/- 0.0006
[Sun Oct 16 04:47:40 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 04:47:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 04:47:40 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 04:47:40 2011] Source does appear to be extended
[Sun Oct 16 04:47:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 04:48:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 04:48:01 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Oct 16 04:48:01 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.833
[Sun Oct 16 04:48:01 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.56"
[Sun Oct 16 04:48:02 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass1_src2.ximg exists
[Sun Oct 16 04:48:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03256_pi14-548_cl_pass1_src2.csv
[Sun Oct 16 04:48:02 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass1_src2_1.ximg exists
[Sun Oct 16 04:48:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03256_pi14-548_cl_pass1_src2.csv
[Sun Oct 16 04:48:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03256_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03256_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 04:48:02 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun Oct 16 04:48:02 2011] fullrun_ccd3_acisf03256_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Oct 16 04:48:02 2011] Fit fullrun_ccd3_acisf03256_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Oct 16 04:48:12 2011] Spatial fit model total counts = 131.789000, observed total counts = 132.000000
[Sun Oct 16 04:48:12 2011] Offset between fit and detection position for source 1 = 0.021930 pixels
[Sun Oct 16 04:48:12 2011] 132.001470 total counts/ 7.317470 bgd. counts: snr = 46.092499
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021930 pixels
  Position = (515.7, 444.7) = 1 11 40.27 8 56 11.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 124.7 +/- 11.5
  Background counts = 7.3
  Rate = 0.006 +/- 0.0006
[Sun Oct 16 04:48:12 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 04:48:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 04:48:12 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 04:48:12 2011] Source does appear to be extended
[Sun Oct 16 04:48:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 04:51:04 2011] Not overwriting source region fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 16 04:51:04 2011] Extracting stamp from image fullrun_ccd3_acisf03256_pi14-548_cl_sm2.00.img.gz, (490, 419) - (542, 471)
[Sun Oct 16 04:51:04 2011] Writing fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1.gif
[Sun Oct 16 04:51:10 2011] ../../acisf03256/products/events/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_src.evt and ../../acisf03256/products/events/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 16 04:51:10 2011] Size of ../../acisf03256/products/events/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_src.evt.gz[events] = 128 counts
[Sun Oct 16 04:51:10 2011] Mean chipx,y = (440.78, 761.36)
[Sun Oct 16 04:51:10 2011] Mean tdetx,y = (4370.64, 3501.78)
[Sun Oct 16 04:51:10 2011] chipx,y range = (420.00-458.00, 743.00-778.00)
[Sun Oct 16 04:51:10 2011] Size of ../../acisf03256/products/events/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 5 counts
[Sun Oct 16 04:51:10 2011] ../../acisf03256/products/images/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_src.img and ../../acisf03256/products/images/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 16 04:51:10 2011] ../../acisf03256/products/spectra/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_src.pi and ../../acisf03256/products/spectra/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 16 04:51:13 2011] ../../acisf03256/products/lightcurves/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_src.lc and ../../acisf03256/products/lightcurves/fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 16 04:52:47 2011] Keeping rmf generated by specextract
[Sun Oct 16 04:52:47 2011] 193.853
[Sun Oct 16 04:52:56 2011] Updating aperture counts using extracted products
[Sun Oct 16 04:52:56 2011] Error reading totcts from fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 16 04:52:56 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 04:52:56 2011] Using photon index=1.80, rate=0.00643, arf fullrun_ccd3_acisf03256_pi14-548_pass1_cl_src1.arf
[Sun Oct 16 04:52:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 04:52:56 2011] Updating source flux to 7.4e-14