[Sat Oct 15 00:55:03 2011] Detection parameters:
  Position = (906.0, 1062.9) = 0 36 57.04 9 11 9.2
  Extent = 0.5" x 0.5", rotation angle = 109 degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.3
  Rate = 0.001 +/- 0.0004

[Sat Oct 15 00:55:05 2011] Off-axis axis estimate = 0.92'
[Sat Oct 15 00:55:55 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:55:55 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 15 00:55:55 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Sat Oct 15 00:55:55 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.38"
[Sat Oct 15 00:55:58 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass0_src6.ximg exists
[Sat Oct 15 00:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03250_pi14-548_cl_pass0_src6.csv
[Sat Oct 15 00:55:58 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Oct 15 00:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03250_pi14-548_cl_pass0_src6.csv
[Sat Oct 15 00:55:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03250_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03250_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 00:55:59 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Oct 15 00:55:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03250_pi14-548_cl_pass0_tfrozen_src6.csv
[Sat Oct 15 00:55:59 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Oct 15 00:55:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03250_pi14-548_cl_pass0_tfrozen_src6.csv
[Sat Oct 15 00:55:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03250_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03250_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 00:56:08 2011] Spatial fit model total counts = 13.577800, observed total counts = 15.000000
[Sat Oct 15 00:56:08 2011] Offset between fit and detection position for source 5 = 0.900923 pixels
[Sat Oct 15 00:56:08 2011] 13.103637 total counts/ 0.430037 bgd. counts: snr = 19.326227
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.900923 pixels
  Position = (906.5, 1063.7) = 0 36 57.04 9 11 9.3
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.7 +/- 3.6
  Background counts = 0.4
  Rate = 0.001 +/- 0.0004
[Sat Oct 15 00:56:08 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 00:56:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 00:56:08 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 00:56:08 2011] Source does appear to be extended
[Sat Oct 15 00:56:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:56:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:56:40 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct 15 00:56:40 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.244
[Sat Oct 15 00:56:40 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.42"
[Sat Oct 15 00:56:41 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass1_src6.ximg exists
[Sat Oct 15 00:56:41 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Oct 15 00:56:41 2011] Fit fullrun_ccd3_acisf03250_pi14-548_cl_pass1_src6 appears to have run properly
[Sat Oct 15 00:56:41 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Oct 15 00:56:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03250_pi14-548_cl_pass1_tfrozen_src6.csv
[Sat Oct 15 00:56:41 2011] fullrun_ccd3_acisf03250_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Oct 15 00:56:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03250_pi14-548_cl_pass1_tfrozen_src6.csv
[Sat Oct 15 00:56:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03250_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03250_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 00:56:53 2011] Spatial fit model total counts = 12.454800, observed total counts = 15.000000
[Sat Oct 15 00:56:53 2011] Offset between fit and detection position for source 5 = 0.064997 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.064997 pixels
  Position = (906.4, 1063.7) = 0 36 57.04 9 11 9.3
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 11.8 +/- 3.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Sat Oct 15 00:56:53 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 00:56:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 00:56:53 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 00:56:53 2011] Source does appear to be extended
[Sat Oct 15 00:56:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:59:09 2011] Not overwriting source region fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 15 00:59:09 2011] Extracting stamp from image fullrun_ccd3_acisf03250_pi14-548_cl_sm2.00.img.gz, (886, 1043) - (927, 1084)
[Sat Oct 15 00:59:09 2011] Writing fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5.gif
[Sat Oct 15 00:59:47 2011] ../../acisf03250/products/events/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_src.evt and ../../acisf03250/products/events/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 15 00:59:47 2011] Size of ../../acisf03250/products/events/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_src.evt.gz[events] = 14 counts
[Sat Oct 15 00:59:47 2011] Mean chipx,y = (550.21, 933.14)
[Sat Oct 15 00:59:47 2011] Mean tdetx,y = (4198.86, 3611.21)
[Sat Oct 15 00:59:47 2011] chipx,y range = (530.00-564.00, 921.00-951.00)
[Sat Oct 15 00:59:47 2011] Size of ../../acisf03250/products/events/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 2 counts
[Sat Oct 15 00:59:47 2011] ../../acisf03250/products/images/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_src.img and ../../acisf03250/products/images/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 15 00:59:47 2011] Not generating rmf since there are only 11 counts
[Sat Oct 15 00:59:47 2011] arf not found, will run specextract
[Sat Oct 15 00:59:48 2011] ../../acisf03250/products/spectra/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_bkg.pi not found
[Sat Oct 15 00:59:48 2011] ../../acisf03250/products/spectra/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5.warf not found
[Sat Oct 15 00:59:48 2011] ../../acisf03250/products/spectra/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5.wrmf not found
[Sat Oct 15 00:59:48 2011] Removal of ../../acisf03250/products/spectra/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5.soff failed
[Sat Oct 15 00:59:48 2011] Failed to rename ../../acisf03250/products/spectra/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_grp.pi to ../../acisf03250/products/spectra/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_src.pi
[Sat Oct 15 00:59:54 2011] ../../acisf03250/products/lightcurves/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_src.lc and ../../acisf03250/products/lightcurves/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 15 01:01:37 2011] No arf file found
[Sat Oct 15 01:01:48 2011] Updating aperture counts using extracted products
[Sat Oct 15 01:01:48 2011] Error reading totcts from fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_src.pi
[Sat Oct 15 01:01:48 2011] No arf file for this source, not re-computing flux
[Sat Oct 15 01:01:55 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 01:01:56 2011] acisf03250/analysis//spectral/fullrun_ccd3_acisf03250_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete