[Fri Sep 23 00:19:00 2011] Detection parameters:
  Position = (460.4, 961.4) = 17 24 4.98 85 57 17.5
  Extent = 0.7" x 0.5", rotation angle = 38 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.001 +/- 0.0003

[Fri Sep 23 00:19:00 2011] Off-axis axis estimate = 4.52'
[Fri Sep 23 00:19:38 2011] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 00:19:38 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Fri Sep 23 00:19:38 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.976
[Fri Sep 23 00:19:38 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.00"
[Fri Sep 23 00:19:38 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass0_src12.ximg exists
[Fri Sep 23 00:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03246_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 00:19:38 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Sep 23 00:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03246_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 00:19:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03246_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03246_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 00:19:39 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 23 00:19:39 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 23 00:19:39 2011] Fit fullrun_ccd3_acisf03246_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 23 00:19:48 2011] Spatial fit model total counts = 12.104600, observed total counts = 12.000000
[Fri Sep 23 00:19:48 2011] Offset between fit and detection position for source 15 = 0.699979 pixels
[Fri Sep 23 00:19:48 2011] 12.112662 total counts/ 0.000162 bgd. counts: snr = 951.550964
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.699979 pixels
  Position = (460.9, 961.9) = 17 24 4.97 85 57 17.5
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri Sep 23 00:19:48 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 00:19:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 00:19:48 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 00:19:48 2011] Source does appear to be extended
[Fri Sep 23 00:19:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 00:20:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 00:20:06 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Sep 23 00:20:06 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Fri Sep 23 00:20:06 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.85"
[Fri Sep 23 00:20:07 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass1_src12.ximg exists
[Fri Sep 23 00:20:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03246_pi14-548_cl_pass1_src12.csv
[Fri Sep 23 00:20:07 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Sep 23 00:20:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03246_pi14-548_cl_pass1_src12.csv
[Fri Sep 23 00:20:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03246_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03246_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 00:20:07 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Sep 23 00:20:07 2011] fullrun_ccd3_acisf03246_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Sep 23 00:20:07 2011] Fit fullrun_ccd3_acisf03246_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Sep 23 00:20:17 2011] Spatial fit model total counts = 12.993900, observed total counts = 12.000000
[Fri Sep 23 00:20:17 2011] Offset between fit and detection position for source 15 = 0.174760 pixels
[Fri Sep 23 00:20:17 2011] 12.984300 total counts/ 0.000000 bgd. counts: snr = 3390526497439.045898
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.174760 pixels
  Position = (461.1, 962.0) = 17 24 4.91 85 57 17.5
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 13.0 +/- 3.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Fri Sep 23 00:20:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 00:20:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 00:20:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 00:20:17 2011] Source does appear to be extended
[Fri Sep 23 00:20:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 00:22:12 2011] Not overwriting source region fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_src.reg
[Fri Sep 23 00:22:12 2011] Extracting stamp from image fullrun_ccd3_acisf03246_pi14-548_cl_sm2.00.img.gz, (422, 923) - (500, 1001)
[Fri Sep 23 00:22:12 2011] Writing fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15.gif
[Fri Sep 23 00:23:01 2011] ../../acisf03246/products/events/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_src.evt and ../../acisf03246/products/events/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Fri Sep 23 00:23:01 2011] Size of ../../acisf03246/products/events/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_src.evt.gz[events] = 12 counts
[Fri Sep 23 00:23:01 2011] Mean chipx,y = (171.92, 713.58)
[Fri Sep 23 00:23:01 2011] Mean tdetx,y = (4418.42, 3232.92)
[Fri Sep 23 00:23:01 2011] chipx,y range = (154.00-189.00, 701.00-735.00)
[Fri Sep 23 00:23:01 2011] Size of ../../acisf03246/products/events/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 4 counts
[Fri Sep 23 00:23:01 2011] ../../acisf03246/products/images/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_src.img and ../../acisf03246/products/images/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Fri Sep 23 00:23:01 2011] ../../acisf03246/products/spectra/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_src.pi and ../../acisf03246/products/spectra/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Fri Sep 23 00:23:01 2011] Not generating rmf since there are only 12 counts
[Fri Sep 23 00:23:05 2011] ../../acisf03246/products/lightcurves/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_src.lc and ../../acisf03246/products/lightcurves/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Fri Sep 23 00:23:33 2011] 184.356
[Fri Sep 23 00:23:43 2011] Updating aperture counts using extracted products
[Fri Sep 23 00:23:43 2011] Error reading totcts from fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_src.pi.gz
[Fri Sep 23 00:23:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 00:23:43 2011] Using photon index=1.80, rate=0.0013, arf fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15.arf
[Fri Sep 23 00:23:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 00:23:43 2011] Updating source flux to 1.5e-14
[Fri Sep 23 00:23:49 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 00:23:50 2011] acisf03246/analysis//spectral/fullrun_ccd3_acisf03246_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete