[Fri Sep 23 00:18:51 2011] Detection parameters:
  Position = (451.5, 1036.3) = 17 33 25.17 85 51 8.0
  Extent = 1.8" x 1.3", rotation angle = 44 degrees
  Source counts = 44.8 +/- 6.9
  Background counts = 2.2
  Rate = 0.004 +/- 0.0007

[Fri Sep 23 00:18:52 2011] Off-axis axis estimate = 7.55'
[Fri Sep 23 00:19:36 2011] Using EEF radius (= 2.53 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 00:19:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 00:19:36 2011] Initial guess for spatial extent in simple fitting = 2.53"
[Fri Sep 23 00:19:36 2011] source mask rpix=5.1, npix_max = 127, mask sum = 110, frac = 0.866
[Fri Sep 23 00:19:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.53"
[Fri Sep 23 00:19:36 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 00:19:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03246_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 00:19:36 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 00:19:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03246_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 00:19:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03246_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03246_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 00:19:36 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 00:19:36 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 00:19:36 2011] Fit fullrun_ccd0_acisf03246_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 00:19:45 2011] Spatial fit model total counts = 52.967900, observed total counts = 55.000000
[Fri Sep 23 00:19:45 2011] Offset between fit and detection position for source 3 = 0.700945 pixels
[Fri Sep 23 00:19:45 2011] 52.338849 total counts/ 0.106049 bgd. counts: snr = 160.394702
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.700945 pixels
  Position = (452.1, 1036.7) = 17 33 25.13 85 51 7.9
  Extent = 2.1 (1.8-2.4)", rotation angle = 0
  Source counts = 52.2 +/- 7.2
  Background counts = 0.1
  Rate = 0.005 +/- 0.0007
[Fri Sep 23 00:19:45 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 00:19:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 00:19:45 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 00:19:45 2011] Source does appear to be extended
[Fri Sep 23 00:19:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 00:20:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 00:20:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 00:20:04 2011] Initial guess for spatial extent in simple fitting = 2.11"
[Fri Sep 23 00:20:04 2011] source mask rpix=4.3, npix_max = 91, mask sum = 90, frac = 0.984
[Fri Sep 23 00:20:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.11"
[Fri Sep 23 00:20:04 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 00:20:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03246_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 00:20:04 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 00:20:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03246_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 00:20:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03246_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03246_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 00:20:05 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 00:20:05 2011] fullrun_ccd0_acisf03246_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 00:20:05 2011] Fit fullrun_ccd0_acisf03246_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 00:20:15 2011] Spatial fit model total counts = 52.937900, observed total counts = 54.000000
[Fri Sep 23 00:20:15 2011] Offset between fit and detection position for source 3 = 0.241359 pixels
[Fri Sep 23 00:20:15 2011] 52.278930 total counts/ 1.421030 bgd. counts: snr = 42.663531
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.241359 pixels
  Position = (452.1, 1037.0) = 17 33 25.10 85 51 8.1
  Extent = 2.1 (1.7-2.5)", rotation angle = 0
  Source counts = 50.9 +/- 7.2
  Background counts = 1.4
  Rate = 0.005 +/- 0.0007
[Fri Sep 23 00:20:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 00:20:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 00:20:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 00:20:15 2011] Source does appear to be extended
[Fri Sep 23 00:20:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 00:20:39 2011] Not overwriting source region fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 23 00:20:39 2011] Extracting stamp from image fullrun_ccd0_acisf03246_pi14-548_cl_sm2.00.img.gz, (357, 942) - (547, 1132)
[Fri Sep 23 00:20:39 2011] Writing fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3.gif
[Fri Sep 23 00:20:43 2011] ../../acisf03246/products/events/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_src.evt and ../../acisf03246/products/events/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 23 00:20:44 2011] Size of ../../acisf03246/products/events/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_src.evt.gz[events] = 51 counts
[Fri Sep 23 00:20:44 2011] Mean chipx,y = (940.49, 290.06)
[Fri Sep 23 00:20:44 2011] Mean tdetx,y = (3351.06, 4191.51)
[Fri Sep 23 00:20:44 2011] chipx,y range = (919.00-958.00, 270.00-311.00)
[Fri Sep 23 00:20:44 2011] Size of ../../acisf03246/products/events/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 23 counts
[Fri Sep 23 00:20:44 2011] ../../acisf03246/products/images/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_src.img and ../../acisf03246/products/images/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 23 00:20:44 2011] ../../acisf03246/products/spectra/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_src.pi and ../../acisf03246/products/spectra/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 23 00:20:44 2011] Not generating rmf since there are only 50 counts
[Fri Sep 23 00:20:47 2011] ../../acisf03246/products/lightcurves/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_src.lc and ../../acisf03246/products/lightcurves/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 23 00:21:06 2011] 168.046
[Fri Sep 23 00:23:42 2011] Updating aperture counts using extracted products
[Fri Sep 23 00:23:42 2011] Error reading totcts from fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 23 00:23:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 00:23:42 2011] Using photon index=1.80, rate=0.00509, arf fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3.arf
[Fri Sep 23 00:23:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 00:23:42 2011] Updating source flux to 6.4e-14
[Fri Sep 23 00:23:46 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 00:23:47 2011] acisf03246/analysis//spectral/fullrun_ccd0_acisf03246_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete