[Fri Sep 30 04:38:18 2011] Detection parameters:
  Position = (407.5, 1153.2) = 3 18 43.15 41 49 52.5
  Extent = 0.8" x 0.7", rotation angle = 134 degrees
  Source counts = 15.4 +/- 4.7
  Background counts = 6.6
  Rate = 0.0002 +/- 5e-05

[Fri Sep 30 04:38:19 2011] Off-axis axis estimate = 5.37'
[Fri Sep 30 04:39:48 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:39:48 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Fri Sep 30 04:39:48 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.015
[Fri Sep 30 04:39:48 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 1.34"
[Fri Sep 30 04:39:49 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass0_src24.ximg exists
[Fri Sep 30 04:39:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03237_pi14-548_cl_pass0_src24.csv
[Fri Sep 30 04:39:49 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass0_src24_1.ximg exists
[Fri Sep 30 04:39:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03237_pi14-548_cl_pass0_src24.csv
[Fri Sep 30 04:39:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03237_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03237_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:39:50 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Fri Sep 30 04:39:50 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Sep 30 04:39:50 2011] Fit fullrun_ccd6_acisf03237_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Sep 30 04:40:05 2011] Spatial fit model total counts = 36.908100, observed total counts = 37.000000
[Fri Sep 30 04:40:05 2011] Offset between fit and detection position for source 17 = 2.038416 pixels
[Fri Sep 30 04:40:05 2011] 36.595770 total counts/ 4.681470 bgd. counts: snr = 14.750074
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.038416 pixels
  Position = (407.9, 1155.2) = 3 18 43.16 41 49 53.3
  Extent = 1.5 (0.8-1.9)", rotation angle = 0
  Source counts = 31.9 +/- 6.0
  Background counts = 4.7
  Rate = 0.0003 +/- 6e-05
[Fri Sep 30 04:40:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:40:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:40:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:40:05 2011] Source does appear to be extended
[Fri Sep 30 04:40:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:40:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:40:30 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Fri Sep 30 04:40:30 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.925
[Fri Sep 30 04:40:30 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 1.54"
[Fri Sep 30 04:40:33 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass1_src23.ximg exists
[Fri Sep 30 04:40:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03237_pi14-548_cl_pass1_src23.csv
[Fri Sep 30 04:40:33 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Sep 30 04:40:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03237_pi14-548_cl_pass1_src23.csv
[Fri Sep 30 04:40:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03237_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03237_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:40:34 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Sep 30 04:40:34 2011] fullrun_ccd6_acisf03237_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Sep 30 04:40:34 2011] Fit fullrun_ccd6_acisf03237_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Sep 30 04:40:50 2011] Spatial fit model total counts = 43.687600, observed total counts = 44.000000
[Fri Sep 30 04:40:50 2011] Offset between fit and detection position for source 17 = 0.900954 pixels
[Fri Sep 30 04:40:50 2011] 43.127246 total counts/ 0.529646 bgd. counts: snr = 58.531854
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.900954 pixels
  Position = (408.1, 1156.1) = 3 18 43.15 41 49 53.7
  Extent = 1.9 (1.2-2.2)", rotation angle = 0
  Source counts = 42.6 +/- 6.6
  Background counts = 0.5
  Rate = 0.0005 +/- 7e-05
[Fri Sep 30 04:40:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:40:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:40:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:40:50 2011] Source does appear to be extended
[Fri Sep 30 04:40:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:41:47 2011] Not overwriting source region fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_src.reg
[Fri Sep 30 04:41:47 2011] Extracting stamp from image fullrun_ccd6_acisf03237_pi14-548_cl_sm2.00.img.gz, (322, 1070) - (494, 1242)
[Fri Sep 30 04:41:47 2011] Writing fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17.gif
[Fri Sep 30 04:42:53 2011] ../../acisf03237/products/events/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_src.evt and ../../acisf03237/products/events/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Fri Sep 30 04:42:53 2011] Size of ../../acisf03237/products/events/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_src.evt.gz[events] = 76 counts
[Fri Sep 30 04:42:53 2011] Mean chipx,y = (792.93, 51.21)
[Fri Sep 30 04:42:53 2011] Mean tdetx,y = (3667.93, 1753.21)
[Fri Sep 30 04:42:53 2011] chipx,y range = (771.00-819.00, 30.00-74.00)
[Fri Sep 30 04:42:53 2011] Size of ../../acisf03237/products/events/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 594 counts
[Fri Sep 30 04:42:53 2011] ../../acisf03237/products/images/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_src.img and ../../acisf03237/products/images/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Fri Sep 30 04:42:53 2011] ../../acisf03237/products/spectra/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_src.pi and ../../acisf03237/products/spectra/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Fri Sep 30 04:42:53 2011] Not generating rmf since there are only 42 counts
[Fri Sep 30 04:42:56 2011] ../../acisf03237/products/lightcurves/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_src.lc and ../../acisf03237/products/lightcurves/fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Fri Sep 30 04:43:00 2011] 197.232
[Fri Sep 30 04:45:05 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:45:05 2011] Error reading totcts from fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17_src.pi.gz
[Fri Sep 30 04:45:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:45:05 2011] Using photon index=1.80, rate=0.000454, arf fullrun_ccd6_acisf03237_pi14-548_pass1_cl_src17.arf
[Fri Sep 30 04:45:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:45:05 2011] Updating source flux to 4.9e-15
[Fri Sep 30 04:45:15 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting