[Fri Oct 21 15:20:02 2011] Detection parameters:
  Position = (608.7, 53.5) = 0 56 0.29 26 17 50.8
  Extent = 1.6" x 1.2", rotation angle = 155 degrees
  Source counts = 97.6 +/- 11.3
  Background counts = 30.4
  Rate = 0.002 +/- 0.0002

[Fri Oct 21 15:20:04 2011] Off-axis axis estimate = 7.66'
[Fri Oct 21 15:21:14 2011] Using EEF radius (= 2.60 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 15:21:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 15:21:14 2011] Initial guess for spatial extent in simple fitting = 2.60"
[Fri Oct 21 15:21:14 2011] source mask rpix=5.3, npix_max = 133, mask sum = 121, frac = 0.906
[Fri Oct 21 15:21:14 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 2.60"
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct 21 15:21:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct 21 15:21:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src4.csv
[Fri Oct 21 15:21:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 21 15:21:15 2011] Fit fullrun_ccd3_acisf03233_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 21 15:21:32 2011] Spatial fit model total counts = 125.740000, observed total counts = 127.000000
[Fri Oct 21 15:21:32 2011] Offset between fit and detection position for source 4 = 1.626929 pixels
[Fri Oct 21 15:21:32 2011] 125.444070 total counts/ 5.400070 bgd. counts: snr = 51.658378
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.626929 pixels
  Position = (610.3, 53.3) = 0 56 0.25 26 17 50.4
  Extent = 2.7 (2.0-3.1)", rotation angle = 0
  Source counts = 120.0 +/- 11.2
  Background counts = 5.4
  Rate = 0.002 +/- 0.0002
[Fri Oct 21 15:21:32 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 15:21:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 15:21:32 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 15:21:32 2011] Source does appear to be extended
[Fri Oct 21 15:21:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 15:21:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 15:21:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 15:21:56 2011] Initial guess for spatial extent in simple fitting = 2.68"
[Fri Oct 21 15:21:56 2011] source mask rpix=5.5, npix_max = 141, mask sum = 144, frac = 1.015
[Fri Oct 21 15:21:56 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 2.68"
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 21 15:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 21 15:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src4.csv
[Fri Oct 21 15:21:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 21 15:21:57 2011] Fit fullrun_ccd3_acisf03233_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 21 15:22:12 2011] Spatial fit model total counts = 132.740000, observed total counts = 130.000000
[Fri Oct 21 15:22:12 2011] Offset between fit and detection position for source 4 = 0.409407 pixels
[Fri Oct 21 15:22:12 2011] 132.869500 total counts/ 34.014100 bgd. counts: snr = 16.950047
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.409407 pixels
  Position = (609.9, 53.5) = 0 56 0.26 26 17 50.5
  Extent = 2.3 (1.8-3.0)", rotation angle = 0
  Source counts = 98.9 +/- 11.5
  Background counts = 34.0
  Rate = 0.002 +/- 0.0002
[Fri Oct 21 15:22:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 15:22:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 15:22:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 15:22:12 2011] Source does appear to be extended
[Fri Oct 21 15:22:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 15:25:16 2011] Not overwriting source region fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 21 15:25:16 2011] Extracting stamp from image fullrun_ccd3_acisf03233_pi14-548_cl_sm2.00.img.gz, (503, 0) - (717, 161)
[Fri Oct 21 15:25:16 2011] Writing fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4.gif
[Fri Oct 21 15:25:26 2011] ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_src.evt and ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 21 15:25:26 2011] Size of ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_src.evt.gz[events] = 132 counts
[Fri Oct 21 15:25:26 2011] Mean chipx,y = (19.67, 552.97)
[Fri Oct 21 15:25:26 2011] Mean tdetx,y = (4579.03, 3080.67)
[Fri Oct 21 15:25:26 2011] chipx,y range = (2.00-42.00, 524.00-579.00)
[Fri Oct 21 15:25:26 2011] Size of ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 323 counts
[Fri Oct 21 15:25:26 2011] ../../acisf03233/products/images/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_src.img and ../../acisf03233/products/images/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 21 15:25:26 2011] ../../acisf03233/products/spectra/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_src.pi and ../../acisf03233/products/spectra/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 21 15:25:26 2011] Not generating rmf since there are only 98 counts
[Fri Oct 21 15:25:28 2011] ../../acisf03233/products/lightcurves/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_src.lc and ../../acisf03233/products/lightcurves/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 21 15:26:03 2011] 168.493
[Fri Oct 21 15:26:14 2011] Updating aperture counts using extracted products
[Fri Oct 21 15:26:14 2011] Error reading totcts from fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 21 15:26:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 15:26:14 2011] Using photon index=1.80, rate=0.00199, arf fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src4.arf
[Fri Oct 21 15:26:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 15:26:14 2011] Updating source flux to 2.6e-14
[Fri Oct 21 15:26:39 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting