[Fri Oct 21 15:20:02 2011] Detection parameters:
  Position = (879.4, 878.5) = 0 55 50.39 26 24 36.7
  Extent = 0.5" x 0.5", rotation angle = 35 degrees
  Source counts = 323.7 +/- 21.0
  Background counts = 118.3
  Rate = 0.007 +/- 0.0004

[Fri Oct 21 15:20:04 2011] Off-axis axis estimate = 1.11'
[Fri Oct 21 15:21:14 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 15:21:14 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct 21 15:21:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.387
[Fri Oct 21 15:21:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 15:21:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 15:21:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 15:21:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03233_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 15:21:15 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 15:21:15 2011] Fit fullrun_ccd3_acisf03233_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 15:21:32 2011] Spatial fit model total counts = 966.641000, observed total counts = 968.000000
[Fri Oct 21 15:21:32 2011] Offset between fit and detection position for source 1 = 1.445754 pixels
[Fri Oct 21 15:21:32 2011] 966.403000 total counts/ 790.801000 bgd. counts: snr = 6.244474
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.445754 pixels
  Position = (880.7, 877.9) = 0 55 50.36 26 24 36.2
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 175.6 +/- 31.1
  Background counts = 790.8
  Rate = 0.004 +/- 0.0006
[Fri Oct 21 15:21:32 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 15:21:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 15:21:32 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 15:21:32 2011] Source does appear to be extended
[Fri Oct 21 15:21:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 15:21:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 15:21:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 15:21:56 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct 21 15:21:56 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Fri Oct 21 15:21:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 15:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 15:21:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 15:21:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03233_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 15:21:57 2011] fullrun_ccd3_acisf03233_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 15:21:57 2011] Fit fullrun_ccd3_acisf03233_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 15:22:12 2011] Spatial fit model total counts = 1819.260000, observed total counts = 1817.000000
[Fri Oct 21 15:22:12 2011] Offset between fit and detection position for source 1 = 2.165167 pixels
[Fri Oct 21 15:22:12 2011] 1830.359000 total counts/ 1095.850000 bgd. counts: snr = 22.188174
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.165167 pixels
  Position = (878.8, 878.8) = 0 55 50.43 26 24 36.6
  Extent = 3.0 (3.0-6.0)", rotation angle = 0
  Source counts = 734.5 +/- 42.8
  Background counts = 1095.8
  Rate = 0.01 +/- 0.0009
[Fri Oct 21 15:22:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 15:22:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 15:22:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 15:22:12 2011] Source does appear to be extended
[Fri Oct 21 15:22:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 15:25:16 2011] Not overwriting source region fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 15:25:16 2011] Extracting stamp from image fullrun_ccd3_acisf03233_pi14-548_cl_sm2.00.img.gz, (742, 742) - (1016, 1016)
[Fri Oct 21 15:25:16 2011] Writing fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 15:25:17 2011] ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_src.evt and ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 15:25:18 2011] Size of ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_src.evt.gz[events] = 3801 counts
[Fri Oct 21 15:25:18 2011] Mean chipx,y = (827.23, 862.97)
[Fri Oct 21 15:25:18 2011] Mean tdetx,y = (4269.03, 3888.23)
[Fri Oct 21 15:25:18 2011] chipx,y range = (788.00-868.00, 822.00-904.00)
[Fri Oct 21 15:25:18 2011] Size of ../../acisf03233/products/events/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6392 counts
[Fri Oct 21 15:25:18 2011] ../../acisf03233/products/images/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_src.img and ../../acisf03233/products/images/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 15:25:18 2011] ../../acisf03233/products/spectra/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_src.pi and ../../acisf03233/products/spectra/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 15:25:20 2011] ../../acisf03233/products/lightcurves/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_src.lc and ../../acisf03233/products/lightcurves/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 15:26:02 2011] Keeping rmf generated by specextract
[Fri Oct 21 15:26:02 2011] 203.53
[Fri Oct 21 15:26:13 2011] Updating aperture counts using extracted products
[Fri Oct 21 15:26:13 2011] Error reading totcts from fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 15:26:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 15:26:14 2011] Using photon index=1.80, rate=0.0148, arf fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 15:26:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 15:26:14 2011] Updating source flux to 1.6e-13
[Fri Oct 21 15:26:47 2011] Reading fit data from acisf03233/analysis//spectral/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 21 15:26:47 2011] Spectral fit parameter nH value = 1.83666e+21
[Fri Oct 21 15:26:47 2011] Spectral fit parameter PhoIndex value = 2.5868
[Fri Oct 21 15:26:47 2011] Failed to get F(0.3-8.0) from acisf03233/analysis//spectral/fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 15:26:47 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 15:26:47 2011] Using Nh = 1.8e+21, photon index=2.59, rate=0.0148, arf fullrun_ccd3_acisf03233_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 15:26:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 15:26:47 2011] Updating source flux to 1.3e-13