[Mon Oct 24 05:25:01 2011] Detection parameters:
  Position = (630.7, 1022.1) = 11 24 19.99 38 47 38.3
  Extent = 0.9" x 0.6", rotation angle = 93 degrees
  Source counts = 30.3 +/- 5.6
  Background counts = 0.7
  Rate = 0.002 +/- 0.0003

[Mon Oct 24 05:25:02 2011] Off-axis axis estimate = 5.14'
[Mon Oct 24 05:25:39 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 05:25:39 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Mon Oct 24 05:25:39 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Mon Oct 24 05:25:39 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.24"
[Mon Oct 24 05:25:40 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 24 05:25:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03222_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 05:25:40 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 24 05:25:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03222_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 05:25:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03222_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03222_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 05:25:40 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 24 05:25:40 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 24 05:25:40 2011] Fit fullrun_ccd3_acisf03222_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 24 05:25:47 2011] Spatial fit model total counts = 38.887500, observed total counts = 38.000000
[Mon Oct 24 05:25:47 2011] Offset between fit and detection position for source 1 = 1.441588 pixels
[Mon Oct 24 05:25:47 2011] 38.877103 total counts/ 0.071103 bgd. counts: snr = 145.530493
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.441588 pixels
  Position = (630.8, 1023.6) = 11 24 20.01 38 47 38.8
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 38.8 +/- 6.2
  Background counts = 0.1
  Rate = 0.002 +/- 0.0003
[Mon Oct 24 05:25:47 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 05:25:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 05:25:47 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 05:25:47 2011] Source does appear to be extended
[Mon Oct 24 05:25:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 05:26:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 05:26:04 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Mon Oct 24 05:26:04 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.034
[Mon Oct 24 05:26:04 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.21"
[Mon Oct 24 05:26:05 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 24 05:26:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03222_pi14-548_cl_pass1_src3.csv
[Mon Oct 24 05:26:05 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 24 05:26:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03222_pi14-548_cl_pass1_src3.csv
[Mon Oct 24 05:26:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03222_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03222_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 05:26:05 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 24 05:26:05 2011] fullrun_ccd3_acisf03222_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 24 05:26:05 2011] Fit fullrun_ccd3_acisf03222_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 24 05:26:14 2011] Spatial fit model total counts = 37.526600, observed total counts = 38.000000
[Mon Oct 24 05:26:14 2011] Offset between fit and detection position for source 1 = 0.629563 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.629563 pixels
  Position = (630.6, 1024.2) = 11 24 20.01 38 47 39.1
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 37.3 +/- 6.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Mon Oct 24 05:26:14 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 05:26:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 05:26:14 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 05:26:14 2011] Source does appear to be extended
[Mon Oct 24 05:26:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 05:28:09 2011] Not overwriting source region fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 05:28:09 2011] Extracting stamp from image fullrun_ccd3_acisf03222_pi14-548_cl_sm2.00.img.gz, (581, 975) - (680, 1074)
[Mon Oct 24 05:28:09 2011] Writing fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 05:28:15 2011] ../../acisf03222/products/events/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_src.evt and ../../acisf03222/products/events/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 05:28:15 2011] Size of ../../acisf03222/products/events/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_src.evt.gz[events] = 38 counts
[Mon Oct 24 05:28:15 2011] Mean chipx,y = (372.50, 799.71)
[Mon Oct 24 05:28:15 2011] Mean tdetx,y = (4332.29, 3433.50)
[Mon Oct 24 05:28:15 2011] chipx,y range = (352.00-388.00, 781.00-822.00)
[Mon Oct 24 05:28:15 2011] Size of ../../acisf03222/products/events/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Mon Oct 24 05:28:15 2011] ../../acisf03222/products/images/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_src.img and ../../acisf03222/products/images/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 05:28:15 2011] ../../acisf03222/products/spectra/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_src.pi and ../../acisf03222/products/spectra/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 24 05:28:15 2011] Not generating rmf since there are only 37 counts
[Mon Oct 24 05:28:18 2011] ../../acisf03222/products/lightcurves/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_src.lc and ../../acisf03222/products/lightcurves/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 05:28:35 2011] 183.696
[Mon Oct 24 05:28:41 2011] Updating aperture counts using extracted products
[Mon Oct 24 05:28:41 2011] Error reading totcts from fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 05:28:41 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 05:28:41 2011] Using photon index=1.80, rate=0.00208, arf fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 05:28:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 05:28:41 2011] Updating source flux to 2.5e-14
[Mon Oct 24 05:28:50 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 05:28:51 2011] acisf03222/analysis//spectral/fullrun_ccd3_acisf03222_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete