[Fri Sep 23 11:49:48 2011] Detection parameters:
  Position = (543.3, 217.0) = 1 13 31.65 15 25 10.0
  Extent = 2.7" x 1.5", rotation angle = 117 degrees
  Source counts = 346.0 +/- 19.4
  Background counts = 32.0
  Rate = 0.006 +/- 0.0003

[Fri Sep 23 11:49:48 2011] Off-axis axis estimate = 8.11'
[Fri Sep 23 11:51:11 2011] Using EEF radius (= 2.90 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:51:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 11:51:11 2011] Initial guess for spatial extent in simple fitting = 2.90"
[Fri Sep 23 11:51:11 2011] source mask rpix=5.9, npix_max = 164, mask sum = 156, frac = 0.951
[Fri Sep 23 11:51:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.90"
[Fri Sep 23 11:51:11 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 11:51:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03219_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 11:51:11 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 11:51:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03219_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 11:51:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03219_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03219_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 11:51:12 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 11:51:12 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 11:51:12 2011] Fit fullrun_ccd3_acisf03219_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 11:51:35 2011] Spatial fit model total counts = 393.977000, observed total counts = 394.000000
[Fri Sep 23 11:51:35 2011] Offset between fit and detection position for source 37 = 0.645563 pixels
[Fri Sep 23 11:51:35 2011] 396.046000 total counts/ 88.953000 bgd. counts: snr = 32.560391
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.645563 pixels
  Position = (543.9, 216.7) = 1 13 31.64 15 25 9.6
  Extent = 2.2 (1.9-2.5)", rotation angle = 0
  Source counts = 307.1 +/- 19.9
  Background counts = 89.0
  Rate = 0.005 +/- 0.0003
[Fri Sep 23 11:51:35 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 11:51:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 11:51:35 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 11:51:35 2011] Source does appear to be extended
[Fri Sep 23 11:51:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 11:52:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:52:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 11:52:21 2011] Initial guess for spatial extent in simple fitting = 2.19"
[Fri Sep 23 11:52:21 2011] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.016
[Fri Sep 23 11:52:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.19"
[Fri Sep 23 11:52:24 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 11:52:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03219_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 11:52:24 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 11:52:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03219_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 11:52:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03219_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03219_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 11:52:25 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 11:52:25 2011] fullrun_ccd3_acisf03219_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 11:52:25 2011] Fit fullrun_ccd3_acisf03219_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 11:52:49 2011] Spatial fit model total counts = 377.995000, observed total counts = 378.000000
[Fri Sep 23 11:52:49 2011] Offset between fit and detection position for source 37 = 0.121789 pixels
[Fri Sep 23 11:52:49 2011] 380.525000 total counts/ 115.615000 bgd. counts: snr = 24.637195
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.121789 pixels
  Position = (544.0, 216.6) = 1 13 31.64 15 25 9.5
  Extent = 1.8 (1.6-2.1)", rotation angle = 0
  Source counts = 264.9 +/- 19.5
  Background counts = 115.6
  Rate = 0.005 +/- 0.0003
[Fri Sep 23 11:52:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 11:52:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 11:52:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 11:52:49 2011] Source does appear to be extended
[Fri Sep 23 11:52:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 12:04:57 2011] Not overwriting source region fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_src.reg
[Fri Sep 23 12:04:57 2011] Extracting stamp from image fullrun_ccd3_acisf03219_pi14-548_cl_sm2.00.img.gz, (461, 133) - (627, 300)
[Fri Sep 23 12:04:57 2011] Writing fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37.gif
[Fri Sep 23 12:04:58 2011] ../../acisf03219/products/events/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_src.evt and ../../acisf03219/products/events/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_bgd.evt exist, delete to re-create
[Fri Sep 23 12:04:58 2011] Size of ../../acisf03219/products/events/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_src.evt.gz[events] = 342 counts
[Fri Sep 23 12:04:58 2011] Mean chipx,y = (31.83, 684.84)
[Fri Sep 23 12:04:58 2011] Mean tdetx,y = (4447.16, 3092.83)
[Fri Sep 23 12:04:58 2011] chipx,y range = (7.00-61.00, 657.00-714.00)
[Fri Sep 23 12:04:58 2011] Size of ../../acisf03219/products/events/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_bgd.evt.gz[events] = 112 counts
[Fri Sep 23 12:04:58 2011] ../../acisf03219/products/images/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_src.img and ../../acisf03219/products/images/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_bgd.img exist, delete to re-create
[Fri Sep 23 12:04:58 2011] rmf not found, will run specextract
[Fri Sep 23 12:04:58 2011] arf not found, will run specextract
[Fri Sep 23 12:05:01 2011] ../../acisf03219/products/spectra/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_bkg.pi not found
[Fri Sep 23 12:05:01 2011] ../../acisf03219/products/spectra/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37.warf not found
[Fri Sep 23 12:05:01 2011] ../../acisf03219/products/spectra/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37.wrmf not found
[Fri Sep 23 12:05:01 2011] Removal of ../../acisf03219/products/spectra/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37.soff failed
[Fri Sep 23 12:05:01 2011] Failed to rename ../../acisf03219/products/spectra/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_grp.pi to ../../acisf03219/products/spectra/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_src.pi
[Fri Sep 23 12:05:09 2011] ../../acisf03219/products/lightcurves/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_src.lc and ../../acisf03219/products/lightcurves/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_bgd.lc exist, delete to re-create
[Fri Sep 23 12:07:47 2011] No arf file found
[Fri Sep 23 12:07:51 2011] Updating aperture counts using extracted products
[Fri Sep 23 12:07:51 2011] Error reading totcts from fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_src.pi
[Fri Sep 23 12:07:51 2011] No arf file for this source, not re-computing flux
[Fri Sep 23 12:07:57 2011] Source 37 has no response, skipping
[Fri Sep 23 12:07:58 2011] acisf03219/analysis//spectral/fullrun_ccd3_acisf03219_pi14-548_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete