[Fri Sep 23 11:49:41 2011] Detection parameters:
  Position = (695.5, 1112.5) = 1 12 58.77 15 27 19.2
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 156.1 +/- 12.6
  Background counts = 3.9
  Rate = 0.003 +/- 0.0002

[Fri Sep 23 11:49:44 2011] Off-axis axis estimate = 2.71'
[Fri Sep 23 11:51:10 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:51:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 11:51:10 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Sep 23 11:51:10 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.914
[Fri Sep 23 11:51:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.53"
[Fri Sep 23 11:51:10 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 11:51:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03219_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 11:51:10 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 11:51:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03219_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 11:51:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03219_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03219_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 11:51:11 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 11:51:11 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 11:51:11 2011] Fit fullrun_ccd2_acisf03219_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 11:51:32 2011] Spatial fit model total counts = 191.497000, observed total counts = 198.000000
[Fri Sep 23 11:51:32 2011] Offset between fit and detection position for source 1 = 0.996195 pixels
[Fri Sep 23 11:51:32 2011] 191.607896 total counts/ 0.102896 bgd. counts: snr = 597.008990
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.996195 pixels
  Position = (695.9, 1113.4) = 1 12 58.77 15 27 19.4
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 191.5 +/- 13.8
  Background counts = 0.1
  Rate = 0.003 +/- 0.0002
[Fri Sep 23 11:51:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 11:51:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 11:51:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 11:51:32 2011] Source does appear to be extended
[Fri Sep 23 11:51:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 11:52:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:52:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 11:52:19 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Sep 23 11:52:19 2011] source mask rpix=1.1, npix_max = 10, mask sum = 11, frac = 1.047
[Fri Sep 23 11:52:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Fri Sep 23 11:52:20 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 11:52:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03219_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 11:52:20 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 11:52:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03219_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 11:52:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03219_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03219_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 11:52:20 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 11:52:20 2011] fullrun_ccd2_acisf03219_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 11:52:20 2011] Fit fullrun_ccd2_acisf03219_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 11:52:44 2011] Spatial fit model total counts = 197.958000, observed total counts = 200.000000
[Fri Sep 23 11:52:44 2011] Offset between fit and detection position for source 1 = 0.036637 pixels
[Fri Sep 23 11:52:44 2011] 198.623400 total counts/ 12.035400 bgd. counts: snr = 53.784043
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.036637 pixels
  Position = (695.9, 1113.4) = 1 12 58.77 15 27 19.4
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 186.6 +/- 14.1
  Background counts = 12.0
  Rate = 0.003 +/- 0.0002
[Fri Sep 23 11:52:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 11:52:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 11:52:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 11:52:44 2011] Source does appear to be extended
[Fri Sep 23 11:52:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 12:02:03 2011] Not overwriting source region fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 12:02:03 2011] Extracting stamp from image fullrun_ccd2_acisf03219_pi14-548_cl_sm2.00.img.gz, (671, 1088) - (721, 1139)
[Fri Sep 23 12:02:03 2011] Writing fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 12:02:04 2011] ../../acisf03219/products/events/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_src.evt and ../../acisf03219/products/events/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 12:02:04 2011] Size of ../../acisf03219/products/events/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_src.evt.gz[events] = 191 counts
[Fri Sep 23 12:02:04 2011] Mean chipx,y = (195.93, 773.01)
[Fri Sep 23 12:02:04 2011] Mean tdetx,y = (3834.01, 3890.07)
[Fri Sep 23 12:02:04 2011] chipx,y range = (179.00-216.00, 753.00-791.00)
[Fri Sep 23 12:02:05 2011] Size of ../../acisf03219/products/events/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 25 counts
[Fri Sep 23 12:02:05 2011] ../../acisf03219/products/images/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_src.img and ../../acisf03219/products/images/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 12:02:05 2011] rmf not found, will run specextract
[Fri Sep 23 12:02:05 2011] arf not found, will run specextract
[Fri Sep 23 12:02:07 2011] ../../acisf03219/products/spectra/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_bkg.pi not found
[Fri Sep 23 12:02:07 2011] ../../acisf03219/products/spectra/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1.warf not found
[Fri Sep 23 12:02:07 2011] ../../acisf03219/products/spectra/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1.wrmf not found
[Fri Sep 23 12:02:07 2011] Removal of ../../acisf03219/products/spectra/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1.soff failed
[Fri Sep 23 12:02:08 2011] Failed to rename ../../acisf03219/products/spectra/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_grp.pi to ../../acisf03219/products/spectra/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_src.pi
[Fri Sep 23 12:02:14 2011] ../../acisf03219/products/lightcurves/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_src.lc and ../../acisf03219/products/lightcurves/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 12:04:57 2011] No arf file found
[Fri Sep 23 12:07:51 2011] Updating aperture counts using extracted products
[Fri Sep 23 12:07:51 2011] Error reading totcts from fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_src.pi
[Fri Sep 23 12:07:51 2011] No arf file for this source, not re-computing flux
[Fri Sep 23 12:07:56 2011] Source 1 has no response, skipping
[Fri Sep 23 12:07:57 2011] acisf03219/analysis//spectral/fullrun_ccd2_acisf03219_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete