[Tue Oct 18 22:12:47 2011] Detection parameters:
  Position = (851.8, 415.8) = 13 31 43.35 11 11 32.5
  Extent = 0.9" x 0.6", rotation angle = 14 degrees
  Source counts = 97.2 +/- 10.0
  Background counts = 2.8
  Rate = 0.003 +/- 0.0003

[Tue Oct 18 22:12:48 2011] Off-axis axis estimate = 3.51'
[Tue Oct 18 22:13:28 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 22:13:28 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Tue Oct 18 22:13:28 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.094
[Tue Oct 18 22:13:28 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.69"
[Tue Oct 18 22:13:29 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct 18 22:13:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03213_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 22:13:29 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct 18 22:13:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03213_pi14-548_cl_pass0_src3.csv
[Tue Oct 18 22:13:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03213_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03213_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 22:13:30 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct 18 22:13:30 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct 18 22:13:30 2011] Fit fullrun_ccd6_acisf03213_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct 18 22:13:37 2011] Source 6 is offset by 6.399431 and -6.859392 pixels which is larger than
2 X fitted extent = 0.706179 x 0.706179, not incorporating fit results
[Tue Oct 18 22:13:37 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 22:13:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 22:13:37 2011] Assessing source extent using major
[Tue Oct 18 22:13:37 2011] Source does appear to be extended
[Tue Oct 18 22:13:37 2011] Computing asymmetry using major and minor axis, asym = 1.47
[Tue Oct 18 22:13:55 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 22:13:55 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Tue Oct 18 22:13:55 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.094
[Tue Oct 18 22:13:55 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.69"
[Tue Oct 18 22:13:56 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct 18 22:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03213_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 22:13:56 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct 18 22:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03213_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 22:13:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03213_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03213_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 22:13:56 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct 18 22:13:56 2011] fullrun_ccd6_acisf03213_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct 18 22:13:56 2011] Fit fullrun_ccd6_acisf03213_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Oct 18 22:14:06 2011] Spatial fit model total counts = 103.998000, observed total counts = 103.000000
[Tue Oct 18 22:14:06 2011] Offset between fit and detection position for source 6 = 0.543576 pixels
[Tue Oct 18 22:14:06 2011] 103.816000 total counts/ 15.925100 bgd. counts: snr = 22.024336
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.543576 pixels
  Position = (852.0, 416.3) = 13 31 43.36 11 11 32.5
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 87.9 +/- 10.2
  Background counts = 15.9
  Rate = 0.003 +/- 0.0003
[Tue Oct 18 22:14:06 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 22:14:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 22:14:06 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 22:14:06 2011] Source does appear to be extended
[Tue Oct 18 22:14:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 22:14:50 2011] Not overwriting source region fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_src.reg
[Tue Oct 18 22:14:50 2011] Extracting stamp from image fullrun_ccd6_acisf03213_pi14-548_cl_sm2.00.img.gz, (814, 378) - (890, 455)
[Tue Oct 18 22:14:50 2011] Writing fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6.gif
[Tue Oct 18 22:14:57 2011] ../../acisf03213/products/events/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_src.evt and ../../acisf03213/products/events/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Oct 18 22:14:57 2011] Size of ../../acisf03213/products/events/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_src.evt.gz[events] = 98 counts
[Tue Oct 18 22:14:57 2011] Mean chipx,y = (832.49, 566.11)
[Tue Oct 18 22:14:57 2011] Mean tdetx,y = (3707.49, 2268.11)
[Tue Oct 18 22:14:57 2011] chipx,y range = (815.00-852.00, 547.00-589.00)
[Tue Oct 18 22:14:58 2011] Size of ../../acisf03213/products/events/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 19 counts
[Tue Oct 18 22:14:58 2011] ../../acisf03213/products/images/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_src.img and ../../acisf03213/products/images/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Oct 18 22:14:58 2011] ../../acisf03213/products/spectra/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_src.pi and ../../acisf03213/products/spectra/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Oct 18 22:14:58 2011] Not generating rmf since there are only 87 counts
[Tue Oct 18 22:15:00 2011] ../../acisf03213/products/lightcurves/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_src.lc and ../../acisf03213/products/lightcurves/fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Oct 18 22:15:40 2011] 208.689
[Tue Oct 18 22:17:10 2011] Updating aperture counts using extracted products
[Tue Oct 18 22:17:10 2011] Error reading totcts from fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6_src.pi.gz
[Tue Oct 18 22:17:10 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 22:17:10 2011] Using photon index=1.80, rate=0.00286, arf fullrun_ccd6_acisf03213_pi14-548_pass1_cl_src6.arf
[Tue Oct 18 22:17:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 22:17:10 2011] Updating source flux to 2.9e-14
[Tue Oct 18 22:17:20 2011] Flag b found in src. 6 procflags, skipping spectral fitting
[Tue Oct 18 22:17:20 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting