[Sun Oct  9 02:04:16 2011] Detection parameters:
  Position = (951.7, 1236.7) = 9 52 31.44 51 56 33.8
  Extent = 0.6" x 0.5", rotation angle = 110 degrees
  Source counts = 11.8 +/- 3.6
  Background counts = 1.2
  Rate = 0.0004 +/- 0.0001

[Sun Oct  9 02:04:19 2011] Off-axis axis estimate = 4.09'
[Sun Oct  9 02:05:13 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 02:05:13 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Sun Oct  9 02:05:13 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.243
[Sun Oct  9 02:05:13 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.86"
[Sun Oct  9 02:05:15 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass0_src21.ximg exists
[Sun Oct  9 02:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03195_pi14-548_cl_pass0_src21.csv
[Sun Oct  9 02:05:15 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Oct  9 02:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03195_pi14-548_cl_pass0_src21.csv
[Sun Oct  9 02:05:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03195_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03195_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 02:05:18 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Oct  9 02:05:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03195_pi14-548_cl_pass0_tfrozen_src21.csv
[Sun Oct  9 02:05:18 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Oct  9 02:05:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03195_pi14-548_cl_pass0_tfrozen_src21.csv
[Sun Oct  9 02:05:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03195_pi14-548_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03195_pi14-548_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 02:05:27 2011] Spatial fit model total counts = 13.871900, observed total counts = 15.000000
[Sun Oct  9 02:05:27 2011] Offset between fit and detection position for source 19 = 0.715566 pixels
[Sun Oct  9 02:05:27 2011] 13.918300 total counts/ 0.000000 bgd. counts: snr = 117986865734208.937500
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.715566 pixels
  Position = (952.2, 1237.3) = 9 52 31.44 51 56 33.8
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sun Oct  9 02:05:27 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 02:05:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 02:05:27 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 02:05:27 2011] Source does appear to be extended
[Sun Oct  9 02:05:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 02:05:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  9 02:05:49 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Sun Oct  9 02:05:49 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.071
[Sun Oct  9 02:05:49 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.70"
[Sun Oct  9 02:05:52 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass1_src20.ximg exists
[Sun Oct  9 02:05:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03195_pi14-548_cl_pass1_src20.csv
[Sun Oct  9 02:05:52 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Oct  9 02:05:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03195_pi14-548_cl_pass1_src20.csv
[Sun Oct  9 02:05:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03195_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03195_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 02:05:52 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Oct  9 02:05:52 2011] fullrun_ccd7_acisf03195_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Oct  9 02:05:52 2011] Fit fullrun_ccd7_acisf03195_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Oct  9 02:06:01 2011] Spatial fit model total counts = 14.418400, observed total counts = 15.000000
[Sun Oct  9 02:06:01 2011] Offset between fit and detection position for source 19 = 0.063006 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.063006 pixels
  Position = (952.1, 1237.3) = 9 52 31.44 51 56 33.8
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 14.2 +/- 3.8
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
 Deleting source due to low signal-to-noise ratio