[Tue Apr 10 23:14:31 2012] Detection parameters:
  Position = (896.9, 1052.0) = 3 38 43.22 -35 31 25.0
  Extent = 0.7" x 0.5", rotation angle = 49 degrees
  Source counts = 22.7 +/- 5.1
  Background counts = 3.3
  Rate = 0.0004 +/- 9e-05

[Tue Apr 10 23:14:32 2012] Off-axis axis estimate = 2.97'
[Tue Apr 10 23:16:16 2012] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 23:16:16 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Tue Apr 10 23:16:16 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.437
[Tue Apr 10 23:16:16 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 0.57"
[Tue Apr 10 23:16:17 2012] fullrun_ccd6_acisf00319_pi14-548_cl_pass0_src14.ximg exists
[Tue Apr 10 23:16:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00319_pi14-548_cl_pass0_src14.csv
[Tue Apr 10 23:16:17 2012] fullrun_ccd6_acisf00319_pi14-548_cl_pass0_src14_1.ximg exists
[Tue Apr 10 23:16:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00319_pi14-548_cl_pass0_src14.csv
[Tue Apr 10 23:16:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00319_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00319_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:16:18 2012] fullrun_ccd6_acisf00319_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Tue Apr 10 23:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00319_pi14-548_cl_pass0_tfrozen_src14.csv
[Tue Apr 10 23:16:18 2012] fullrun_ccd6_acisf00319_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Apr 10 23:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00319_pi14-548_cl_pass0_tfrozen_src14.csv
[Tue Apr 10 23:16:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00319_pi14-548_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00319_pi14-548_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 23:16:42 2012] Spatial fit model total counts = 26.977000, observed total counts = 31.000000
[Tue Apr 10 23:16:42 2012] Offset between fit and detection position for source 9 = 1.275090 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.275090 pixels
  Position = (897.8, 1052.9) = 3 38 43.20 -35 31 24.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 24.5 +/- 5.0
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Tue Apr 10 23:16:42 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 23:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 23:16:42 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 23:16:42 2012] Source does appear to be extended
[Tue Apr 10 23:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 23:16:42 2012] Deleting source due to low Poisson probability 0.9