[Mon Oct 10 00:22:24 2011] Detection parameters:
  Position = (900.4, 414.6) = 15 22 29.21 27 42 25.7
  Extent = 0.7" x 0.7", rotation angle = 57 degrees
  Source counts = 196.8 +/- 18.2
  Background counts = 135.2
  Rate = 0.004 +/- 0.0004

[Mon Oct 10 00:22:25 2011] Off-axis axis estimate = 0.92'
[Mon Oct 10 00:24:21 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 00:24:21 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 10 00:24:21 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.388
[Mon Oct 10 00:24:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Mon Oct 10 00:24:21 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 00:24:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03182_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 00:24:21 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 00:24:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03182_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 00:24:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03182_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03182_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 00:24:21 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 00:24:21 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 00:24:21 2011] Fit fullrun_ccd3_acisf03182_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 00:24:34 2011] Spatial fit model total counts = 563.993000, observed total counts = 564.000000
[Mon Oct 10 00:24:34 2011] Offset between fit and detection position for source 1 = 1.022337 pixels
[Mon Oct 10 00:24:34 2011] 563.378000 total counts/ 395.554000 bgd. counts: snr = 8.438226
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.022337 pixels
  Position = (899.8, 413.7) = 15 22 29.25 27 42 25.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 167.8 +/- 23.7
  Background counts = 395.6
  Rate = 0.003 +/- 0.0005
[Mon Oct 10 00:24:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 00:24:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 00:24:34 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 00:24:34 2011] Source does appear to be extended
[Mon Oct 10 00:24:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 00:25:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 00:25:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 00:25:17 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct 10 00:25:17 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Oct 10 00:25:17 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Mon Oct 10 00:25:17 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 00:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03182_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 00:25:17 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 00:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03182_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 00:25:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03182_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03182_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 00:25:18 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 00:25:18 2011] fullrun_ccd3_acisf03182_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 00:25:18 2011] Fit fullrun_ccd3_acisf03182_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 00:25:30 2011] Spatial fit model total counts = 1138.990000, observed total counts = 1139.000000
[Mon Oct 10 00:25:30 2011] Offset between fit and detection position for source 1 = 1.027086 pixels
[Mon Oct 10 00:25:30 2011] 1130.590000 total counts/ 1000.340000 bgd. counts: snr = 4.118167
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.027086 pixels
  Position = (900.0, 414.7) = 15 22 29.24 27 42 25.5
  Extent = 1.3 (1.0-1.8)", rotation angle = 0
  Source counts = 130.2 +/- 33.6
  Background counts = 1000.3
  Rate = 0.003 +/- 0.0007
[Mon Oct 10 00:25:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 00:25:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 00:25:30 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 00:25:30 2011] Source does appear to be extended
[Mon Oct 10 00:25:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 00:28:03 2011] Not overwriting source region fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 00:28:03 2011] Extracting stamp from image fullrun_ccd3_acisf03182_pi14-548_cl_sm2.00.img.gz, (840, 355) - (960, 475)
[Mon Oct 10 00:28:03 2011] Writing fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 00:28:03 2011] ../../acisf03182/products/events/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_src.evt and ../../acisf03182/products/events/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 00:28:03 2011] Size of ../../acisf03182/products/events/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_src.evt.gz[events] = 744 counts
[Mon Oct 10 00:28:03 2011] Mean chipx,y = (785.66, 890.24)
[Mon Oct 10 00:28:03 2011] Mean tdetx,y = (4241.76, 3846.66)
[Mon Oct 10 00:28:03 2011] chipx,y range = (751.00-822.00, 864.00-917.00)
[Mon Oct 10 00:28:03 2011] Size of ../../acisf03182/products/events/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4674 counts
[Mon Oct 10 00:28:03 2011] ../../acisf03182/products/images/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_src.img and ../../acisf03182/products/images/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 00:28:03 2011] ../../acisf03182/products/spectra/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_src.pi and ../../acisf03182/products/spectra/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 00:28:06 2011] ../../acisf03182/products/lightcurves/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_src.lc and ../../acisf03182/products/lightcurves/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 00:28:12 2011] Keeping rmf generated by specextract
[Mon Oct 10 00:28:12 2011] 206.266
[Mon Oct 10 00:28:23 2011] Updating aperture counts using extracted products
[Mon Oct 10 00:28:23 2011] Error reading totcts from fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 00:28:23 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 00:28:23 2011] Using photon index=1.80, rate=0.00263, arf fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 00:28:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 00:28:23 2011] Updating source flux to 2.8e-14
[Mon Oct 10 00:28:45 2011] Reading fit data from acisf03182/analysis//spectral/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 00:28:45 2011] Spectral fit parameter nH value = 3.65917e+21
[Mon Oct 10 00:28:45 2011] Spectral fit parameter PhoIndex value = 2.86092
[Mon Oct 10 00:28:45 2011] Failed to get F(0.3-8.0) from acisf03182/analysis//spectral/fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 00:28:45 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 00:28:45 2011] Using Nh = 3.7e+21, photon index=2.86, rate=0.00263, arf fullrun_ccd3_acisf03182_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 00:28:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 00:28:45 2011] Updating source flux to 2e-14