[Sun Oct 30 18:11:57 2011] Detection parameters:
  Position = (1172.7, 843.1) = 12 26 3.57 12 56 58.9
  Extent = 0.5" x 0.5", rotation angle = 175 degrees
  Source counts = 23.0 +/- 5.1
  Background counts = 3.0
  Rate = 0.002 +/- 0.0003

[Sun Oct 30 18:11:58 2011] Off-axis axis estimate = 1.34'
[Sun Oct 30 18:12:47 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 18:12:47 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct 30 18:12:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.910
[Sun Oct 30 18:12:47 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.39"
[Sun Oct 30 18:12:48 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct 30 18:12:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00318_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 18:12:48 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct 30 18:12:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00318_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 18:12:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00318_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00318_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 18:12:49 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct 30 18:12:49 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct 30 18:12:49 2011] Fit fullrun_ccd7_acisf00318_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct 30 18:12:57 2011] Spatial fit model total counts = 34.896800, observed total counts = 35.000000
[Sun Oct 30 18:12:57 2011] Offset between fit and detection position for source 9 = 0.603409 pixels
[Sun Oct 30 18:12:57 2011] 34.413200 total counts/ 12.061300 bgd. counts: snr = 6.436020
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.603409 pixels
  Position = (1173.3, 843.3) = 12 26 3.57 12 56 58.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 22.4 +/- 5.9
  Background counts = 12.1
  Rate = 0.002 +/- 0.0004
[Sun Oct 30 18:12:57 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 18:12:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 18:12:57 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 18:12:57 2011] Source does appear to be extended
[Sun Oct 30 18:12:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 18:13:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 18:13:12 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Sun Oct 30 18:13:12 2011] source mask rpix=0.7, npix_max = 6, mask sum = 9, frac = 1.468
[Sun Oct 30 18:13:12 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.36"
[Sun Oct 30 18:13:14 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass1_src10.ximg exists
[Sun Oct 30 18:13:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00318_pi14-548_cl_pass1_src10.csv
[Sun Oct 30 18:13:14 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Oct 30 18:13:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00318_pi14-548_cl_pass1_src10.csv
[Sun Oct 30 18:13:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00318_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00318_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 18:13:15 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Oct 30 18:13:15 2011] fullrun_ccd7_acisf00318_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Oct 30 18:13:15 2011] Fit fullrun_ccd7_acisf00318_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Oct 30 18:13:22 2011] Spatial fit model total counts = 34.896800, observed total counts = 35.000000
[Sun Oct 30 18:13:22 2011] Offset between fit and detection position for source 9 = 0.000002 pixels
[Sun Oct 30 18:13:22 2011] 34.413200 total counts/ 12.061300 bgd. counts: snr = 6.436020
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.000002 pixels
  Position = (1173.3, 843.3) = 12 26 3.57 12 56 58.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 22.4 +/- 5.9
  Background counts = 12.1
  Rate = 0.002 +/- 0.0004
[Sun Oct 30 18:13:22 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 18:13:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 18:13:22 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 18:13:22 2011] Source does appear to be extended
[Sun Oct 30 18:13:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 18:14:16 2011] Not overwriting source region fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 30 18:14:16 2011] Extracting stamp from image fullrun_ccd7_acisf00318_pi14-548_cl_sm2.00.img.gz, (1157, 827) - (1190, 860)
[Sun Oct 30 18:14:16 2011] Writing fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9.gif
[Sun Oct 30 18:14:42 2011] ../../acisf00318/products/events/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_src.evt and ../../acisf00318/products/events/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 30 18:14:42 2011] Size of ../../acisf00318/products/events/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_src.evt.gz[events] = 24 counts
[Sun Oct 30 18:14:42 2011] Mean chipx,y = (143.17, 870.08)
[Sun Oct 30 18:14:42 2011] Mean tdetx,y = (4060.17, 2572.08)
[Sun Oct 30 18:14:42 2011] chipx,y range = (129.00-163.00, 850.00-883.00)
[Sun Oct 30 18:14:42 2011] Size of ../../acisf00318/products/events/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 18 counts
[Sun Oct 30 18:14:42 2011] ../../acisf00318/products/images/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_src.img and ../../acisf00318/products/images/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 30 18:14:42 2011] ../../acisf00318/products/spectra/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_src.pi and ../../acisf00318/products/spectra/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 30 18:14:42 2011] Not generating rmf since there are only 22 counts
[Sun Oct 30 18:14:45 2011] ../../acisf00318/products/lightcurves/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_src.lc and ../../acisf00318/products/lightcurves/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 30 18:15:03 2011] 236.807
[Sun Oct 30 18:15:05 2011] Updating aperture counts using extracted products
[Sun Oct 30 18:15:05 2011] Error reading totcts from fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 30 18:15:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 18:15:05 2011] Using photon index=1.80, rate=0.00153, arf fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9.arf
[Sun Oct 30 18:15:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 18:15:05 2011] Updating source flux to 8.9e-15
[Sun Oct 30 18:15:11 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 18:15:12 2011] acisf00318/analysis//spectral/fullrun_ccd7_acisf00318_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete