[Sat Oct  1 18:03:39 2011] Detection parameters:
  Position = (559.8, 708.8) = 13 25 26.39 -43 0 54.8
  Extent = 1.1" x 0.6", rotation angle = 43 degrees
  Source counts = 294.6 +/- 20.3
  Background counts = 116.4
  Rate = 0.008 +/- 0.0006

[Sat Oct  1 18:03:50 2011] Off-axis axis estimate = 4.48'
[Sat Oct  1 18:05:29 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 18:05:29 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sat Oct  1 18:05:29 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Sat Oct  1 18:05:29 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.98"
[Sat Oct  1 18:05:30 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass0_src13.ximg exists
[Sat Oct  1 18:05:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00316_pi14-548_cl_pass0_src13.csv
[Sat Oct  1 18:05:30 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Oct  1 18:05:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00316_pi14-548_cl_pass0_src13.csv
[Sat Oct  1 18:05:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00316_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00316_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 18:05:31 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Oct  1 18:05:31 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Oct  1 18:05:31 2011] Fit fullrun_ccd3_acisf00316_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Oct  1 18:06:08 2011] Spatial fit model total counts = 523.771000, observed total counts = 524.000000
[Sat Oct  1 18:06:08 2011] Offset between fit and detection position for source 20 = 0.587177 pixels
[Sat Oct  1 18:06:08 2011] 520.417000 total counts/ 251.715000 bgd. counts: snr = 16.936215
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.587177 pixels
  Position = (560.2, 709.2) = 13 25 26.40 -43 0 54.8
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 268.7 +/- 22.8
  Background counts = 251.7
  Rate = 0.008 +/- 0.0006
[Sat Oct  1 18:06:08 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 18:06:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 18:06:08 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 18:06:08 2011] Source does appear to be extended
[Sat Oct  1 18:06:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 18:06:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 18:06:46 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Sat Oct  1 18:06:46 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Sat Oct  1 18:06:46 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.78"
[Sat Oct  1 18:06:48 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass1_src13.ximg exists
[Sat Oct  1 18:06:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00316_pi14-548_cl_pass1_src13.csv
[Sat Oct  1 18:06:48 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Oct  1 18:06:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00316_pi14-548_cl_pass1_src13.csv
[Sat Oct  1 18:06:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00316_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00316_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 18:06:49 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Oct  1 18:06:49 2011] fullrun_ccd3_acisf00316_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Oct  1 18:06:49 2011] Fit fullrun_ccd3_acisf00316_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Oct  1 18:07:24 2011] Spatial fit model total counts = 518.507000, observed total counts = 518.000000
[Sat Oct  1 18:07:24 2011] Offset between fit and detection position for source 20 = 0.008511 pixels
[Sat Oct  1 18:07:24 2011] 514.336000 total counts/ 246.223000 bgd. counts: snr = 17.086518
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.008511 pixels
  Position = (560.2, 709.2) = 13 25 26.40 -43 0 54.8
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 268.1 +/- 22.7
  Background counts = 246.2
  Rate = 0.008 +/- 0.0006
[Sat Oct  1 18:07:24 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 18:07:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 18:07:24 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 18:07:24 2011] Source does appear to be extended
[Sat Oct  1 18:07:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 18:24:34 2011] Not overwriting source region fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_src.reg
[Sat Oct  1 18:24:34 2011] Extracting stamp from image fullrun_ccd3_acisf00316_pi14-548_cl_sm2.00.img.gz, (524, 673) - (596, 745)
[Sat Oct  1 18:24:34 2011] Writing fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20.gif
[Sat Oct  1 18:27:57 2011] ../../acisf00316/products/events/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_src.evt and ../../acisf00316/products/events/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sat Oct  1 18:27:57 2011] Size of ../../acisf00316/products/events/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_src.evt.gz[events] = 397 counts
[Sat Oct  1 18:27:57 2011] Mean chipx,y = (573.80, 627.07)
[Sat Oct  1 18:27:57 2011] Mean tdetx,y = (4504.93, 3634.80)
[Sat Oct  1 18:27:57 2011] chipx,y range = (553.00-595.00, 604.00-648.00)
[Sat Oct  1 18:27:57 2011] Size of ../../acisf00316/products/events/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 1260 counts
[Sat Oct  1 18:27:57 2011] ../../acisf00316/products/images/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_src.img and ../../acisf00316/products/images/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sat Oct  1 18:27:57 2011] rmf not found, will run specextract
[Sat Oct  1 18:28:03 2011] ../../acisf00316/products/spectra/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_bkg.pi not found
[Sat Oct  1 18:28:03 2011] ../../acisf00316/products/spectra/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20.warf not found
[Sat Oct  1 18:28:03 2011] ../../acisf00316/products/spectra/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20.wrmf not found
[Sat Oct  1 18:28:03 2011] Removal of ../../acisf00316/products/spectra/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20.soff failed
[Sat Oct  1 18:28:03 2011] Failed to rename ../../acisf00316/products/spectra/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_grp.pi to ../../acisf00316/products/spectra/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_src.pi
[Sat Oct  1 18:28:10 2011] ../../acisf00316/products/lightcurves/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_src.lc and ../../acisf00316/products/lightcurves/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sat Oct  1 18:46:34 2011] 187.652
[Sat Oct  1 18:46:56 2011] Updating aperture counts using extracted products
[Sat Oct  1 18:46:56 2011] Error reading totcts from fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_src.pi
[Sat Oct  1 18:46:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 18:46:57 2011] Using photon index=1.80, rate=0.00751, arf fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20.arf
[Sat Oct  1 18:46:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 18:46:57 2011] Updating source flux to 7.7e-14
[Sat Oct  1 18:47:07 2011] Source 20 has no response, skipping
[Sat Oct  1 18:47:08 2011] acisf00316/analysis//spectral/fullrun_ccd3_acisf00316_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete