[Fri Sep 23 15:08:34 2011] Detection parameters:
  Position = (232.7, 807.6) = 12 29 48.14 3 27 21.7
  Extent = 5.6" x 4.9", rotation angle = 157 degrees
  Source counts = 116.7 +/- 14.9
  Background counts = 106.3
  Rate = 0.003 +/- 0.0004

[Fri Sep 23 15:08:34 2011] Off-axis axis estimate = 13.98'
[Fri Sep 23 15:10:05 2011] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:10:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 15:10:05 2011] Initial guess for spatial extent in simple fitting = 8.81"
[Fri Sep 23 15:10:05 2011] source mask rpix=17.9, npix_max = 1354, mask sum = 1369, frac = 1.011
[Fri Sep 23 15:10:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.81"
[Fri Sep 23 15:10:06 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 15:10:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03150_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 15:10:06 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 15:10:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03150_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 15:10:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03150_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03150_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:10:06 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 15:10:06 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 15:10:06 2011] Fit fullrun_ccd3_acisf03150_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 15:10:25 2011] Spatial fit model total counts = 365.644000, observed total counts = 366.000000
[Fri Sep 23 15:10:25 2011] Offset between fit and detection position for source 1 = 1.220447 pixels
[Fri Sep 23 15:10:25 2011] 365.711000 total counts/ 207.880000 bgd. counts: snr = 10.946769
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.220447 pixels
  Position = (232.4, 806.4) = 12 29 48.17 3 27 20.9
  Extent = 8.8 (7.4-10.1)", rotation angle = 0
  Source counts = 157.8 +/- 19.1
  Background counts = 207.9
  Rate = 0.004 +/- 0.0005
[Fri Sep 23 15:10:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:10:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:10:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:10:25 2011] Source does appear to be extended
[Fri Sep 23 15:10:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 15:10:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 15:10:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 15:10:58 2011] Initial guess for spatial extent in simple fitting = 8.83"
[Fri Sep 23 15:10:58 2011] source mask rpix=17.9, npix_max = 1361, mask sum = 1369, frac = 1.006
[Fri Sep 23 15:10:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.83"
[Fri Sep 23 15:10:58 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 15:10:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03150_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 15:10:58 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 15:10:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03150_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 15:10:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03150_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03150_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 15:10:58 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 15:10:59 2011] fullrun_ccd3_acisf03150_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 15:10:59 2011] Fit fullrun_ccd3_acisf03150_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 15:11:18 2011] Spatial fit model total counts = 358.510000, observed total counts = 359.000000
[Fri Sep 23 15:11:18 2011] Offset between fit and detection position for source 1 = 0.050612 pixels
[Fri Sep 23 15:11:18 2011] 358.581000 total counts/ 195.830000 bgd. counts: snr = 11.630116
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.050612 pixels
  Position = (232.5, 806.4) = 12 29 48.16 3 27 20.9
  Extent = 9.0 (7.5-10.3)", rotation angle = 0
  Source counts = 162.8 +/- 18.9
  Background counts = 195.8
  Rate = 0.004 +/- 0.0005
[Fri Sep 23 15:11:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 15:11:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 15:11:18 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 15:11:18 2011] Source does appear to be extended
[Fri Sep 23 15:11:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 15:12:36 2011] Not overwriting source region fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 15:12:36 2011] Extracting stamp from image fullrun_ccd3_acisf03150_pi14-548_cl_sm2.00.img.gz, (0, 395) - (644, 1218)
[Fri Sep 23 15:12:36 2011] Writing fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 15:12:37 2011] ../../acisf03150/products/events/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_src.evt and ../../acisf03150/products/events/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 15:12:37 2011] Size of ../../acisf03150/products/events/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_src.evt.gz[events] = 323 counts
[Fri Sep 23 15:12:37 2011] Mean chipx,y = (852.53, 831.50)
[Fri Sep 23 15:12:37 2011] Mean tdetx,y = (4300.50, 3913.53)
[Fri Sep 23 15:12:37 2011] chipx,y range = (774.00-934.00, 741.00-911.00)
[Fri Sep 23 15:12:37 2011] Size of ../../acisf03150/products/events/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1301 counts
[Fri Sep 23 15:12:37 2011] ../../acisf03150/products/images/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_src.img and ../../acisf03150/products/images/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 15:12:37 2011] rmf not found, will run specextract
[Fri Sep 23 15:12:37 2011] arf not found, will run specextract
[Fri Sep 23 15:12:39 2011] ../../acisf03150/products/spectra/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_bkg.pi not found
[Fri Sep 23 15:12:39 2011] ../../acisf03150/products/spectra/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1.warf not found
[Fri Sep 23 15:12:39 2011] ../../acisf03150/products/spectra/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1.wrmf not found
[Fri Sep 23 15:12:39 2011] Removal of ../../acisf03150/products/spectra/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1.soff failed
[Fri Sep 23 15:12:39 2011] Failed to rename ../../acisf03150/products/spectra/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_grp.pi to ../../acisf03150/products/spectra/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_src.pi
[Fri Sep 23 15:12:44 2011] ../../acisf03150/products/lightcurves/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_src.lc and ../../acisf03150/products/lightcurves/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 15:13:51 2011] No arf file found
[Fri Sep 23 15:24:23 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:24:23 2011] Error reading totcts from fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_src.pi
[Fri Sep 23 15:24:23 2011] No arf file for this source, not re-computing flux
[Fri Sep 23 15:24:31 2011] Source 1 has no response, skipping
[Fri Sep 23 15:24:32 2011] acisf03150/analysis//spectral/fullrun_ccd3_acisf03150_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete