[Tue Oct 25 00:04:40 2011] Detection parameters:
  Position = (803.1, 195.5) = 6 17 56.88 78 16 7.8
  Extent = 0.6" x 0.5", rotation angle = 43 degrees
  Source counts = 152.1 +/- 12.5
  Background counts = 3.9
  Rate = 0.02 +/- 0.001

[Tue Oct 25 00:04:41 2011] Off-axis axis estimate = 5.91'
[Tue Oct 25 00:05:12 2011] Using EEF radius (= 1.58 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 00:05:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 00:05:12 2011] Initial guess for spatial extent in simple fitting = 1.58"
[Tue Oct 25 00:05:12 2011] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.012
[Tue Oct 25 00:05:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.58"
[Tue Oct 25 00:05:12 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 25 00:05:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03132_pi14-548_cl_pass0_src1.csv
[Tue Oct 25 00:05:12 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 25 00:05:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03132_pi14-548_cl_pass0_src1.csv
[Tue Oct 25 00:05:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03132_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03132_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 00:05:13 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 25 00:05:13 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 25 00:05:13 2011] Fit fullrun_ccd7_acisf03132_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 25 00:05:19 2011] Spatial fit model total counts = 280.980000, observed total counts = 283.000000
[Tue Oct 25 00:05:19 2011] Offset between fit and detection position for source 2 = 0.216305 pixels
[Tue Oct 25 00:05:19 2011] 280.887100 total counts/ 20.922100 bgd. counts: snr = 56.834526
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.216305 pixels
  Position = (803.0, 195.7) = 6 17 56.98 78 16 7.7
  Extent = 2.0 (1.8-2.1)", rotation angle = 0
  Source counts = 260.0 +/- 16.8
  Background counts = 20.9
  Rate = 0.03 +/- 0.002
[Tue Oct 25 00:05:19 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 00:05:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 00:05:19 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 00:05:19 2011] Source does appear to be extended
[Tue Oct 25 00:05:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 00:05:19 2011] Source is confused with source 25
[Tue Oct 25 00:05:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 00:05:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 00:05:36 2011] Initial guess for spatial extent in simple fitting = 1.96"
[Tue Oct 25 00:05:36 2011] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.004
[Tue Oct 25 00:05:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.96"
[Tue Oct 25 00:05:37 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 25 00:05:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03132_pi14-548_cl_pass1_src1.csv
[Tue Oct 25 00:05:37 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 25 00:05:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03132_pi14-548_cl_pass1_src1.csv
[Tue Oct 25 00:05:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03132_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03132_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 00:05:37 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 25 00:05:37 2011] fullrun_ccd7_acisf03132_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 25 00:05:37 2011] Fit fullrun_ccd7_acisf03132_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 25 00:05:44 2011] Spatial fit model total counts = 288.025000, observed total counts = 290.000000
[Tue Oct 25 00:05:44 2011] Offset between fit and detection position for source 2 = 0.174709 pixels
[Tue Oct 25 00:05:44 2011] 288.623300 total counts/ 17.532300 bgd. counts: snr = 64.743422
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.174709 pixels
  Position = (802.9, 195.7) = 6 17 57.01 78 16 7.7
  Extent = 2.0 (1.9-2.3)", rotation angle = 0
  Source counts = 271.1 +/- 17.0
  Background counts = 17.5
  Rate = 0.03 +/- 0.002
[Tue Oct 25 00:05:44 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 00:05:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 00:05:44 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 00:05:44 2011] Source does appear to be extended
[Tue Oct 25 00:05:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 00:06:56 2011] Not overwriting source region fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_src.reg
[Tue Oct 25 00:06:56 2011] Extracting stamp from image fullrun_ccd7_acisf03132_pi14-548_cl_sm2.00.img.gz, (709, 102) - (896, 289)
[Tue Oct 25 00:06:56 2011] Writing fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2.gif
[Tue Oct 25 00:06:57 2011] ../../acisf03132/products/events/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_src.evt and ../../acisf03132/products/events/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Oct 25 00:06:57 2011] Size of ../../acisf03132/products/events/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_src.evt.gz[events] = 289 counts
[Tue Oct 25 00:06:57 2011] Mean chipx,y = (910.76, 328.46)
[Tue Oct 25 00:06:57 2011] Mean tdetx,y = (4827.76, 2030.47)
[Tue Oct 25 00:06:57 2011] chipx,y range = (888.00-934.00, 305.00-357.00)
[Tue Oct 25 00:06:57 2011] Size of ../../acisf03132/products/events/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 75 counts
[Tue Oct 25 00:06:57 2011] ../../acisf03132/products/images/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_src.img and ../../acisf03132/products/images/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Oct 25 00:06:57 2011] ../../acisf03132/products/spectra/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_src.pi and ../../acisf03132/products/spectra/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Oct 25 00:07:00 2011] ../../acisf03132/products/lightcurves/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_src.lc and ../../acisf03132/products/lightcurves/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Oct 25 00:07:41 2011] Keeping rmf generated by specextract
[Tue Oct 25 00:07:41 2011] 214.457
[Tue Oct 25 00:07:43 2011] Updating aperture counts using extracted products
[Tue Oct 25 00:07:43 2011] Error reading totcts from fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Oct 25 00:07:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 00:07:43 2011] Using photon index=1.80, rate=0.0285, arf fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2.arf
[Tue Oct 25 00:07:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 00:07:43 2011] Updating source flux to 2.1e-13
[Tue Oct 25 00:07:50 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Oct 25 00:07:53 2011] Reading fit data from acisf03132/analysis//spectral/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_pl.csv
[Tue Oct 25 00:07:53 2011] Spectral fit parameter nH value = 8.0198e+13
[Tue Oct 25 00:07:53 2011] Spectral fit parameter PhoIndex value = 1.32593
[Tue Oct 25 00:07:53 2011] Failed to get F(0.3-8.0) from acisf03132/analysis//spectral/fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Oct 25 00:07:53 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 00:07:53 2011] Using Nh = 8e+13, photon index=1.33, rate=0.0285, arf fullrun_ccd7_acisf03132_pi14-548_pass1_cl_src2.arf
[Tue Oct 25 00:07:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 00:07:53 2011] Updating source flux to 2.6e-13