[Wed Sep 21 20:28:14 2011] Detection parameters:
  Position = (678.7, 734.8) = 14 25 49.94 35 32 3.4
  Extent = 1.0" x 0.6", rotation angle = 160 degrees
  Source counts = 80.1 +/- 9.2
  Background counts = 4.9
  Rate = 0.0007 +/- 8e-05

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 4.66'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Wed Sep 21 20:30:14 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.05"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src6.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src6.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src6.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep 21 20:30:15 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 86.938500, observed total counts = 86.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 5 = 0.850727 pixels
[Wed Sep 21 20:30:44 2011] 87.192500 total counts/ 11.049600 bgd. counts: snr = 22.906363
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.850727 pixels
  Position = (679.5, 735.2) = 14 25 49.93 35 32 3.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 76.1 +/- 9.3
  Background counts = 11.0
  Rate = 0.0006 +/- 8e-05
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Wed Sep 21 20:32:00 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.144
[Wed Sep 21 20:32:00 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.90"
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src6.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src6.csv
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src6.csv
[Wed Sep 21 20:32:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Sep 21 20:32:30 2011] Spatial fit model total counts = 85.995800, observed total counts = 86.000000
[Wed Sep 21 20:32:30 2011] Offset between fit and detection position for source 5 = 0.022580 pixels
[Wed Sep 21 20:32:30 2011] 86.210040 total counts/ 9.959940 bgd. counts: snr = 24.160842
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.022580 pixels
  Position = (679.5, 735.2) = 14 25 49.93 35 32 3.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 76.3 +/- 9.3
  Background counts = 10.0
  Rate = 0.0006 +/- 8e-05
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:21 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_src.reg
[Wed Sep 21 20:39:21 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (637, 693) - (722, 778)
[Wed Sep 21 20:39:21 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5.gif
[Wed Sep 21 20:39:43 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Sep 21 20:39:43 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_src.evt.gz[events] = 84 counts
[Wed Sep 21 20:39:43 2011] Mean chipx,y = (595.74, 569.87)
[Wed Sep 21 20:39:43 2011] Mean tdetx,y = (4562.13, 3656.74)
[Wed Sep 21 20:39:43 2011] chipx,y range = (577.00-615.00, 552.00-593.00)
[Wed Sep 21 20:39:43 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 63 counts
[Wed Sep 21 20:39:43 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Sep 21 20:39:43 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed Sep 21 20:39:43 2011] Not generating rmf since there are only 76 counts
[Wed Sep 21 20:39:47 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:48 2011] 190.872
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Sep 21 20:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:35 2011] Using photon index=1.80, rate=0.000635, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src5.arf
[Wed Sep 21 20:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:35 2011] Updating source flux to 7.3e-15
[Wed Sep 21 20:44:52 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting