[Wed Sep 21 20:28:14 2011] Detection parameters:
  Position = (783.9, 712.4) = 14 25 45.70 35 31 52.4
  Extent = 0.6" x 0.5", rotation angle = 172 degrees
  Source counts = 66.6 +/- 8.4
  Background counts = 3.4
  Rate = 0.0006 +/- 7e-05

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 4.43'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Wed Sep 21 20:30:14 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.97"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src7.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src7.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src7.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Sep 21 20:30:15 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 80.556900, observed total counts = 79.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 4 = 0.721572 pixels
[Wed Sep 21 20:30:44 2011] 80.374300 total counts/ 12.802200 bgd. counts: snr = 18.885353
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.721572 pixels
  Position = (784.4, 713.0) = 14 25 45.70 35 31 52.4
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 67.6 +/- 9.0
  Background counts = 12.8
  Rate = 0.0006 +/- 7e-05
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Wed Sep 21 20:32:00 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.081
[Wed Sep 21 20:32:00 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.81"
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src7.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src7.csv
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src7_1.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src7.csv
[Wed Sep 21 20:32:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Sep 21 20:32:30 2011] Spatial fit model total counts = 80.992400, observed total counts = 81.000000
[Wed Sep 21 20:32:30 2011] Offset between fit and detection position for source 4 = 0.005685 pixels
[Wed Sep 21 20:32:30 2011] 81.349200 total counts/ 15.980700 bgd. counts: snr = 16.351990
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005685 pixels
  Position = (784.4, 713.0) = 14 25 45.70 35 31 52.4
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 65.4 +/- 9.0
  Background counts = 16.0
  Rate = 0.0005 +/- 8e-05
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:21 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_src.reg
[Wed Sep 21 20:39:21 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (747, 675) - (822, 750)
[Wed Sep 21 20:39:21 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4.gif
[Wed Sep 21 20:39:47 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Sep 21 20:39:47 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_src.evt.gz[events] = 76 counts
[Wed Sep 21 20:39:47 2011] Mean chipx,y = (543.70, 666.59)
[Wed Sep 21 20:39:47 2011] Mean tdetx,y = (4465.41, 3604.70)
[Wed Sep 21 20:39:47 2011] chipx,y range = (526.00-563.00, 646.00-686.00)
[Wed Sep 21 20:39:47 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 61 counts
[Wed Sep 21 20:39:47 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Sep 21 20:39:47 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Sep 21 20:39:47 2011] Not generating rmf since there are only 65 counts
[Wed Sep 21 20:39:50 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:48 2011] 186.14
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 21 20:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:35 2011] Using photon index=1.80, rate=0.000544, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src4.arf
[Wed Sep 21 20:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:36 2011] Updating source flux to 6.4e-15
[Wed Sep 21 20:44:52 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting