[Wed Sep 21 20:28:16 2011] Detection parameters:
  Position = (764.3, 1138.1) = 14 25 46.50 35 35 21.9
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 12.7 +/- 3.7
  Background counts = 1.3
  Rate = 0.0001 +/- 3e-05

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 1.88'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Sep 21 20:30:14 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.822
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 0.42"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src32.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src32.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src32_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src32.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Wed Sep 21 20:30:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src32.csv
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Sep 21 20:30:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src32.csv
[Wed Sep 21 20:30:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 17.706100, observed total counts = 19.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 28 = 0.771018 pixels
[Wed Sep 21 20:30:44 2011] 17.011490 total counts/ 5.073690 bgd. counts: snr = 5.299835
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.771018 pixels
  Position = (764.6, 1138.8) = 14 25 46.50 35 35 21.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 11.9 +/- 4.1
  Background counts = 5.1
  Rate = 0.0001 +/- 3e-05
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Sep 21 20:32:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.940
[Wed Sep 21 20:32:00 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.38"
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src30.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src30_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src30 appears to have run properly
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Sep 21 20:32:30 2011] Spatial fit model total counts = 17.062100, observed total counts = 17.000000
[Wed Sep 21 20:32:30 2011] Offset between fit and detection position for source 28 = 0.007522 pixels
[Wed Sep 21 20:32:30 2011] 16.640340 total counts/ 3.767340 bgd. counts: snr = 6.632272
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.007522 pixels
  Position = (764.6, 1138.8) = 14 25 46.50 35 35 22.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.9 +/- 4.1
  Background counts = 3.8
  Rate = 0.0001 +/- 3e-05
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:22 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_src.reg
[Wed Sep 21 20:39:22 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (748, 1122) - (781, 1155)
[Wed Sep 21 20:39:22 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28.gif
[Wed Sep 21 20:41:14 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Wed Sep 21 20:41:14 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_src.evt.gz[events] = 13 counts
[Wed Sep 21 20:41:14 2011] Mean chipx,y = (956.15, 774.92)
[Wed Sep 21 20:41:14 2011] Mean tdetx,y = (4357.08, 4017.15)
[Wed Sep 21 20:41:14 2011] chipx,y range = (941.00-973.00, 753.00-788.00)
[Wed Sep 21 20:41:14 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 9 counts
[Wed Sep 21 20:41:14 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Wed Sep 21 20:41:14 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Wed Sep 21 20:41:14 2011] Not generating rmf since there are only 12 counts
[Wed Sep 21 20:41:18 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:49 2011] 205.721
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28_src.pi.gz
[Wed Sep 21 20:43:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:36 2011] Using photon index=1.80, rate=0.000107, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src28.arf
[Wed Sep 21 20:43:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:36 2011] Updating source flux to 1.1e-15
[Wed Sep 21 20:44:52 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting