[Wed Sep 21 20:28:15 2011] Detection parameters:
  Position = (962.4, 1031.9) = 14 25 38.51 35 34 29.6
  Extent = 0.8" x 0.5", rotation angle = 174 degrees
  Source counts = 17.3 +/- 4.5
  Background counts = 2.7
  Rate = 0.0001 +/- 4e-05

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 1.52'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Sep 21 20:30:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.888
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.39"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src27.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src27.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src27_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src27.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Sep 21 20:30:16 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 26.995400, observed total counts = 27.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 23 = 0.557009 pixels
[Wed Sep 21 20:30:44 2011] 27.752400 total counts/ 13.883700 bgd. counts: snr = 3.722058
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.557009 pixels
  Position = (962.2, 1032.4) = 14 25 38.54 35 34 29.6
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 13.9 +/- 5.3
  Background counts = 13.9
  Rate = 0.0001 +/- 4e-05
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Sep 21 20:32:00 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.121
[Wed Sep 21 20:32:00 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.45"
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src26.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src26.csv
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src26_1.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src26.csv
[Wed Sep 21 20:32:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Sep 21 20:32:30 2011] Spatial fit model total counts = 26.995400, observed total counts = 27.000000
[Wed Sep 21 20:32:30 2011] Offset between fit and detection position for source 23 = 0.006725 pixels
[Wed Sep 21 20:32:30 2011] 27.754900 total counts/ 13.958000 bgd. counts: snr = 3.692920
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.006725 pixels
  Position = (962.2, 1032.4) = 14 25 38.54 35 34 29.6
  Extent = 0.4 (0.3-0.8)", rotation angle = 0
  Source counts = 13.8 +/- 5.3
  Background counts = 14.0
  Rate = 0.0001 +/- 4e-05
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:21 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_src.reg
[Wed Sep 21 20:39:21 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (942, 1012) - (983, 1053)
[Wed Sep 21 20:39:21 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23.gif
[Wed Sep 21 20:40:59 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed Sep 21 20:40:59 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_src.evt.gz[events] = 16 counts
[Wed Sep 21 20:40:59 2011] Mean chipx,y = (799.88, 934.19)
[Wed Sep 21 20:40:59 2011] Mean tdetx,y = (4197.81, 3860.88)
[Wed Sep 21 20:40:59 2011] chipx,y range = (783.00-815.00, 918.00-945.00)
[Wed Sep 21 20:40:59 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 18 counts
[Wed Sep 21 20:40:59 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed Sep 21 20:40:59 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed Sep 21 20:40:59 2011] Not generating rmf since there are only 13 counts
[Wed Sep 21 20:41:03 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:49 2011] 203.069
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Sep 21 20:43:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:36 2011] Using photon index=1.80, rate=0.000115, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src23.arf
[Wed Sep 21 20:43:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:36 2011] Updating source flux to 1.2e-15
[Wed Sep 21 20:44:52 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting