[Wed Sep 21 20:28:15 2011] Detection parameters:
  Position = (1055.0, 986.8) = 14 25 34.77 35 34 7.4
  Extent = 0.5" x 0.5", rotation angle = 154 degrees
  Source counts = 37.3 +/- 6.2
  Background counts = 1.7
  Rate = 0.0003 +/- 5e-05

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 1.98'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Wed Sep 21 20:30:14 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.800
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.43"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src14.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src14.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src14_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src14.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Sep 21 20:30:16 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 40.468800, observed total counts = 43.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 22 = 0.671156 pixels
[Wed Sep 21 20:30:44 2011] 39.515260 total counts/ 3.554560 bgd. counts: snr = 19.073712
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.671156 pixels
  Position = (1055.5, 987.3) = 14 25 34.77 35 34 7.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 36.0 +/- 6.3
  Background counts = 3.6
  Rate = 0.0003 +/- 5e-05
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Sep 21 20:32:00 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.144
[Wed Sep 21 20:32:00 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.44"
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src14.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src14.csv
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src14_1.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src14.csv
[Wed Sep 21 20:32:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Sep 21 20:32:30 2011] Spatial fit model total counts = 42.671800, observed total counts = 43.000000
[Wed Sep 21 20:32:30 2011] Offset between fit and detection position for source 22 = 0.014282 pixels
[Wed Sep 21 20:32:30 2011] 41.651980 total counts/ 3.153080 bgd. counts: snr = 21.681076
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.014282 pixels
  Position = (1055.5, 987.3) = 14 25 34.77 35 34 7.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 38.5 +/- 6.5
  Background counts = 3.2
  Rate = 0.0003 +/- 5e-05
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:21 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_src.reg
[Wed Sep 21 20:39:21 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (1036, 967) - (1075, 1007)
[Wed Sep 21 20:39:21 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22.gif
[Wed Sep 21 20:40:08 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed Sep 21 20:40:08 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_src.evt.gz[events] = 38 counts
[Wed Sep 21 20:40:08 2011] Mean chipx,y = (730.74, 1003.24)
[Wed Sep 21 20:40:08 2011] Mean tdetx,y = (4128.76, 3791.74)
[Wed Sep 21 20:40:08 2011] chipx,y range = (711.00-746.00, 988.00-1022.00)
[Wed Sep 21 20:40:08 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 9 counts
[Wed Sep 21 20:40:08 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed Sep 21 20:40:08 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed Sep 21 20:40:08 2011] Not generating rmf since there are only 38 counts
[Wed Sep 21 20:40:10 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:48 2011] 191.736
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22_src.pi.gz
[Wed Sep 21 20:43:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:36 2011] Using photon index=1.80, rate=0.000321, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src22.arf
[Wed Sep 21 20:43:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:36 2011] Updating source flux to 3.7e-15
[Wed Sep 21 20:44:52 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting