[Wed Sep 21 20:28:14 2011] Detection parameters:
  Position = (740.7, 158.2) = 14 25 47.43 35 27 19.7
  Extent = 3.6" x 2.4", rotation angle = 8 degrees
  Source counts = 118.4 +/- 13.0
  Background counts = 50.6
  Rate = 0.001 +/- 0.0001

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 8.89'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 3.50 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 3.50"
[Wed Sep 21 20:30:14 2011] source mask rpix=7.1, npix_max = 231, mask sum = 225, frac = 0.973
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.50"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 21 20:30:15 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 174.968000, observed total counts = 175.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 2 = 0.432850 pixels
[Wed Sep 21 20:30:44 2011] 175.027400 total counts/ 71.817400 bgd. counts: snr = 12.178868
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.432850 pixels
  Position = (740.3, 158.0) = 14 25 47.47 35 27 19.4
  Extent = 2.4 (1.8-2.9)", rotation angle = 0
  Source counts = 103.2 +/- 13.2
  Background counts = 71.8
  Rate = 0.0009 +/- 0.0001
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 2.42"
[Wed Sep 21 20:32:00 2011] source mask rpix=4.9, npix_max = 117, mask sum = 110, frac = 0.938
[Wed Sep 21 20:32:00 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.42"
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 20:32:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 21 20:32:30 2011] Spatial fit model total counts = 141.862000, observed total counts = 140.000000
[Wed Sep 21 20:32:30 2011] Offset between fit and detection position for source 2 = 0.952925 pixels
[Wed Sep 21 20:32:30 2011] 141.238400 total counts/ 54.868800 bgd. counts: snr = 11.659990
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.952925 pixels
  Position = (741.3, 158.0) = 14 25 47.43 35 27 19.4
  Extent = 2.0 (1.4-2.6)", rotation angle = 0
  Source counts = 86.4 +/- 11.9
  Background counts = 54.9
  Rate = 0.0007 +/- 0.0001
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:21 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 21 20:39:21 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (650, 67) - (832, 249)
[Wed Sep 21 20:39:21 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2.gif
[Wed Sep 21 20:39:32 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 21 20:39:32 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_src.evt.gz[events] = 138 counts
[Wed Sep 21 20:39:32 2011] Mean chipx,y = (24.17, 463.77)
[Wed Sep 21 20:39:32 2011] Mean tdetx,y = (4668.23, 3085.17)
[Wed Sep 21 20:39:32 2011] chipx,y range = (2.00-46.00, 435.00-492.00)
[Wed Sep 21 20:39:32 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 182 counts
[Wed Sep 21 20:39:32 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 21 20:39:32 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 21 20:39:32 2011] Not generating rmf since there are only 86 counts
[Wed Sep 21 20:39:35 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:48 2011] 165.165
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 21 20:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:35 2011] Using photon index=1.80, rate=0.000719, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src2.arf
[Wed Sep 21 20:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:35 2011] Updating source flux to 9.7e-15
[Wed Sep 21 20:44:52 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting