[Wed Sep 21 20:28:14 2011] Detection parameters:
  Position = (998.5, 746.5) = 14 25 37.05 35 32 9.2
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 34.1 +/- 6.0
  Background counts = 1.9
  Rate = 0.0003 +/- 5e-05

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 3.85'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Wed Sep 21 20:30:14 2011] source mask rpix=1.6, npix_max = 17, mask sum = 15, frac = 0.851
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.79"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src17.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src17.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src17_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src17.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Sep 21 20:30:16 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 47.386300, observed total counts = 49.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 14 = 0.882754 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.882754 pixels
  Position = (999.4, 746.6) = 14 25 37.04 35 32 9.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 48.4 +/- 7.0
  Background counts = 0.0
  Rate = 0.0004 +/- 6e-05
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Wed Sep 21 20:32:00 2011] source mask rpix=1.3, npix_max = 12, mask sum = 5, frac = 0.385
[Wed Sep 21 20:32:00 2011] Skipping simple spatial due to low active detector fraction
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:21 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_src.reg
[Wed Sep 21 20:39:21 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (970, 717) - (1029, 776)
[Wed Sep 21 20:39:21 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14.gif
[Wed Sep 21 20:40:16 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed Sep 21 20:40:16 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_src.evt.gz[events] = 45 counts
[Wed Sep 21 20:40:16 2011] Mean chipx,y = (513.84, 882.71)
[Wed Sep 21 20:40:16 2011] Mean tdetx,y = (4249.29, 3574.84)
[Wed Sep 21 20:40:16 2011] chipx,y range = (497.00-534.00, 863.00-901.00)
[Wed Sep 21 20:40:16 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 30 counts
[Wed Sep 21 20:40:16 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed Sep 21 20:40:16 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed Sep 21 20:40:16 2011] Not generating rmf since there are only 48 counts
[Wed Sep 21 20:40:19 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:48 2011] 181.506
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14_src.pi.gz
[Wed Sep 21 20:43:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:36 2011] Using photon index=1.80, rate=0.000403, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src14.arf
[Wed Sep 21 20:43:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:36 2011] Updating source flux to 4.9e-15
[Wed Sep 21 20:44:52 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting