[Wed Sep 21 20:28:14 2011] Detection parameters:
  Position = (656.5, 551.0) = 14 25 50.83 35 30 32.9
  Extent = 0.8" x 0.5", rotation angle = 178 degrees
  Source counts = 43.4 +/- 7.3
  Background counts = 10.6
  Rate = 0.0004 +/- 6e-05

[Wed Sep 21 20:28:23 2011] Off-axis axis estimate = 6.06'
[Wed Sep 21 20:30:14 2011] Using EEF radius (= 1.66 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:14 2011] Initial guess for spatial extent in simple fitting = 1.66"
[Wed Sep 21 20:30:14 2011] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.931
[Wed Sep 21 20:30:14 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.66"
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src12.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src12.csv
[Wed Sep 21 20:30:15 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Sep 21 20:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src12.csv
[Wed Sep 21 20:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Sep 21 20:30:16 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Sep 21 20:30:16 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Sep 21 20:30:44 2011] Spatial fit model total counts = 51.999500, observed total counts = 52.000000
[Wed Sep 21 20:30:44 2011] Offset between fit and detection position for source 11 = 0.730575 pixels
[Wed Sep 21 20:30:44 2011] 52.828900 total counts/ 19.486600 bgd. counts: snr = 7.553140
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.730575 pixels
  Position = (657.0, 551.4) = 14 25 50.83 35 30 32.9
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 33.3 +/- 7.3
  Background counts = 19.5
  Rate = 0.0003 +/- 6e-05
[Wed Sep 21 20:30:44 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:44 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:44 2011] Source does appear to be extended
[Wed Sep 21 20:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:32:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:32:00 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Sep 21 20:32:00 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Wed Sep 21 20:32:00 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.93"
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src12.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src12.csv
[Wed Sep 21 20:32:01 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src12_1.ximg exists
[Wed Sep 21 20:32:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src12.csv
[Wed Sep 21 20:32:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf03130_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed Sep 21 20:32:02 2011] fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Sep 21 20:32:02 2011] Fit fullrun_ccd3_acisf03130_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Sep 21 20:32:30 2011] Spatial fit model total counts = 46.412500, observed total counts = 46.000000
[Wed Sep 21 20:32:30 2011] Offset between fit and detection position for source 11 = 0.060004 pixels
[Wed Sep 21 20:32:30 2011] 46.697800 total counts/ 13.796600 bgd. counts: snr = 8.857797
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.060004 pixels
  Position = (657.1, 551.4) = 14 25 50.83 35 30 32.9
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 32.9 +/- 6.8
  Background counts = 13.8
  Rate = 0.0003 +/- 6e-05
[Wed Sep 21 20:32:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:30 2011] Source does appear to be extended
[Wed Sep 21 20:32:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:39:21 2011] Not overwriting source region fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_src.reg
[Wed Sep 21 20:39:21 2011] Extracting stamp from image fullrun_ccd3_acisf03130_pi14-548_cl_sm2.00.img.gz, (616, 511) - (698, 592)
[Wed Sep 21 20:39:21 2011] Writing fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11.gif
[Wed Sep 21 20:40:02 2011] ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_src.evt and ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed Sep 21 20:40:02 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_src.evt.gz[events] = 41 counts
[Wed Sep 21 20:40:02 2011] Mean chipx,y = (422.66, 495.39)
[Wed Sep 21 20:40:02 2011] Mean tdetx,y = (4636.61, 3483.66)
[Wed Sep 21 20:40:02 2011] chipx,y range = (406.00-441.00, 476.00-520.00)
[Wed Sep 21 20:40:02 2011] Size of ../../acisf03130/products/events/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 63 counts
[Wed Sep 21 20:40:02 2011] ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_src.img and ../../acisf03130/products/images/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed Sep 21 20:40:02 2011] ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_src.pi and ../../acisf03130/products/spectra/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed Sep 21 20:40:02 2011] Not generating rmf since there are only 32 counts
[Wed Sep 21 20:40:04 2011] ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed Sep 21 20:42:48 2011] 182.74
[Wed Sep 21 20:43:35 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:35 2011] Error reading totcts from fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Sep 21 20:43:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:36 2011] Using photon index=1.80, rate=0.000274, arf fullrun_ccd3_acisf03130_pi14-548_pass1_cl_src11.arf
[Wed Sep 21 20:43:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:36 2011] Updating source flux to 3.3e-15
[Wed Sep 21 20:44:52 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting