[Wed Sep 21 20:28:10 2011] Detection parameters:
  Position = (148.9, 723.7) = 14 25 30.66 35 34 20.1
  Extent = 0.6" x 0.5", rotation angle = 159 degrees
  Source counts = 32.5 +/- 5.9
  Background counts = 2.5
  Rate = 0.0003 +/- 5e-05

[Wed Sep 21 20:28:13 2011] Off-axis axis estimate = 2.21'
[Wed Sep 21 20:30:11 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:11 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Sep 21 20:30:11 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.114
[Wed Sep 21 20:30:11 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.45"
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src18.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src18.csv
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src18.csv
[Wed Sep 21 20:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Sep 21 20:30:13 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Sep 21 20:30:39 2011] Spatial fit model total counts = 38.917500, observed total counts = 38.000000
[Wed Sep 21 20:30:39 2011] Offset between fit and detection position for source 7 = 1.008097 pixels
[Wed Sep 21 20:30:39 2011] 38.287890 total counts/ 7.475490 bgd. counts: snr = 11.269527
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.008097 pixels
  Position = (149.7, 724.3) = 14 25 30.65 35 34 20.2
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 30.8 +/- 6.2
  Background counts = 7.5
  Rate = 0.0003 +/- 5e-05
[Wed Sep 21 20:30:39 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:39 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:39 2011] Source does appear to be extended
[Wed Sep 21 20:30:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:51 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Sep 21 20:31:51 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.940
[Wed Sep 21 20:31:51 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.52"
[Wed Sep 21 20:31:52 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src18.ximg exists
[Wed Sep 21 20:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src18.csv
[Wed Sep 21 20:31:52 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Sep 21 20:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src18.csv
[Wed Sep 21 20:31:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:31:59 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Sep 21 20:32:00 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Sep 21 20:32:00 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Sep 21 20:32:25 2011] Spatial fit model total counts = 38.077500, observed total counts = 38.000000
[Wed Sep 21 20:32:25 2011] Offset between fit and detection position for source 7 = 0.043078 pixels
[Wed Sep 21 20:32:25 2011] 37.125340 total counts/ 6.861840 bgd. counts: snr = 11.553109
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.043078 pixels
  Position = (149.7, 724.3) = 14 25 30.65 35 34 20.2
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 30.3 +/- 6.1
  Background counts = 6.9
  Rate = 0.0003 +/- 5e-05
[Wed Sep 21 20:32:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:25 2011] Source does appear to be extended
[Wed Sep 21 20:32:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:36:42 2011] Not overwriting source region fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_src.reg
[Wed Sep 21 20:36:42 2011] Extracting stamp from image fullrun_ccd2_acisf03130_pi14-548_cl_sm2.00.img.gz, (127, 701) - (173, 748)
[Wed Sep 21 20:36:42 2011] Writing fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7.gif
[Wed Sep 21 20:37:53 2011] ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_src.evt and ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Sep 21 20:37:53 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_src.evt.gz[events] = 33 counts
[Wed Sep 21 20:37:53 2011] Mean chipx,y = (300.15, 958.36)
[Wed Sep 21 20:37:53 2011] Mean tdetx,y = (4019.36, 3785.85)
[Wed Sep 21 20:37:53 2011] chipx,y range = (283.00-317.00, 941.00-978.00)
[Wed Sep 21 20:37:53 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 20 counts
[Wed Sep 21 20:37:53 2011] ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_src.img and ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Sep 21 20:37:53 2011] ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_src.pi and ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Sep 21 20:37:53 2011] Not generating rmf since there are only 30 counts
[Wed Sep 21 20:37:56 2011] ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Sep 21 20:39:20 2011] 199.503
[Wed Sep 21 20:43:34 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:34 2011] Error reading totcts from fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Sep 21 20:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:35 2011] Using photon index=1.80, rate=0.000252, arf fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src7.arf
[Wed Sep 21 20:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:35 2011] Updating source flux to 2.7e-15
[Wed Sep 21 20:44:29 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting