[Wed Sep 21 20:28:13 2011] Detection parameters:
  Position = (379.2, 254.7) = 14 25 21.39 35 30 29.3
  Extent = 1.8" x 0.8", rotation angle = 12 degrees
  Source counts = 31.2 +/- 6.2
  Background counts = 6.8
  Rate = 0.0003 +/- 5e-05

[Wed Sep 21 20:28:13 2011] Off-axis axis estimate = 6.45'
[Wed Sep 21 20:30:11 2011] Using EEF radius (= 1.86 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:11 2011] Initial guess for spatial extent in simple fitting = 1.86"
[Wed Sep 21 20:30:11 2011] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.871
[Wed Sep 21 20:30:11 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 1.86"
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src19.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src19.csv
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src19.csv
[Wed Sep 21 20:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Sep 21 20:30:13 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Sep 21 20:30:39 2011] Spatial fit model total counts = 45.764500, observed total counts = 50.000000
[Wed Sep 21 20:30:39 2011] Offset between fit and detection position for source 52 = 1.624179 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 1.624179 pixels
  Position = (380.7, 255.2) = 14 25 21.35 35 30 29.3
  Extent = 1.7 (1.5-1.8)", rotation angle = 0
  Source counts = 43.8 +/- 6.6
  Background counts = 0.0
  Rate = 0.0004 +/- 6e-05
[Wed Sep 21 20:30:39 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:39 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:39 2011] Source does appear to be extended
[Wed Sep 21 20:30:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:51 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Wed Sep 21 20:31:51 2011] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.912
[Wed Sep 21 20:31:51 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 1.68"
[Wed Sep 21 20:31:52 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src19.ximg exists
[Wed Sep 21 20:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src19.csv
[Wed Sep 21 20:31:52 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src19_1.ximg exists
[Wed Sep 21 20:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src19.csv
[Wed Sep 21 20:31:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:00 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Wed Sep 21 20:32:00 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Sep 21 20:32:00 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Sep 21 20:32:25 2011] Spatial fit model total counts = 44.903200, observed total counts = 44.000000
[Wed Sep 21 20:32:25 2011] Offset between fit and detection position for source 52 = 2.163769 pixels
[Wed Sep 21 20:32:25 2011] 45.096600 total counts/ 20.175500 bgd. counts: snr = 5.548238
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 2.163769 pixels
  Position = (378.9, 254.1) = 14 25 21.42 35 30 28.8
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 24.9 +/- 6.7
  Background counts = 20.2
  Rate = 0.0002 +/- 6e-05
[Wed Sep 21 20:32:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:25 2011] Source does appear to be extended
[Wed Sep 21 20:32:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:36:42 2011] Not overwriting source region fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_src.reg
[Wed Sep 21 20:36:42 2011] Extracting stamp from image fullrun_ccd2_acisf03130_pi14-548_cl_sm2.00.img.gz, (342, 218) - (415, 291)
[Wed Sep 21 20:36:42 2011] Writing fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52.gif
[Wed Sep 21 20:37:56 2011] ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_src.evt and ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Wed Sep 21 20:37:56 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_src.evt.gz[events] = 32 counts
[Wed Sep 21 20:37:56 2011] Mean chipx,y = (817.59, 875.38)
[Wed Sep 21 20:37:56 2011] Mean tdetx,y = (3936.38, 3268.41)
[Wed Sep 21 20:37:56 2011] chipx,y range = (800.00-834.00, 852.00-893.00)
[Wed Sep 21 20:37:56 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 57 counts
[Wed Sep 21 20:37:56 2011] ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_src.img and ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Wed Sep 21 20:37:56 2011] ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_src.pi and ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Wed Sep 21 20:37:56 2011] Not generating rmf since there are only 24 counts
[Wed Sep 21 20:37:59 2011] ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Wed Sep 21 20:39:20 2011] 173.492
[Wed Sep 21 20:43:34 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:34 2011] Error reading totcts from fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52_src.pi.gz
[Wed Sep 21 20:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:35 2011] Using photon index=1.80, rate=0.000207, arf fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src52.arf
[Wed Sep 21 20:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:35 2011] Updating source flux to 2.6e-15
[Wed Sep 21 20:44:29 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting