[Wed Sep 21 20:28:11 2011] Detection parameters:
  Position = (385.7, 640.4) = 14 25 21.12 35 33 39.1
  Extent = 0.5" x 0.5", rotation angle = 23 degrees
  Source counts = 12.2 +/- 3.7
  Background counts = 1.8
  Rate = 0.0001 +/- 3e-05

[Wed Sep 21 20:28:13 2011] Off-axis axis estimate = 4.13'
[Wed Sep 21 20:30:11 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:11 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Wed Sep 21 20:30:11 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.217
[Wed Sep 21 20:30:11 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.87"
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src30.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src30.csv
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src30_1.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src30.csv
[Wed Sep 21 20:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:14 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Wed Sep 21 20:30:14 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Sep 21 20:30:14 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Sep 21 20:30:39 2011] Spatial fit model total counts = 18.809300, observed total counts = 19.000000
[Wed Sep 21 20:30:39 2011] Offset between fit and detection position for source 23 = 0.979463 pixels
[Wed Sep 21 20:30:39 2011] 18.298330 total counts/ 6.101030 bgd. counts: snr = 4.938126
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.979463 pixels
  Position = (386.4, 641.0) = 14 25 21.11 35 33 39.2
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.2 +/- 4.3
  Background counts = 6.1
  Rate = 0.0001 +/- 4e-05
[Wed Sep 21 20:30:39 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:39 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:39 2011] Source does appear to be extended
[Wed Sep 21 20:30:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:51 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Sep 21 20:31:51 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.990
[Wed Sep 21 20:31:51 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.50"
[Wed Sep 21 20:31:53 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src30.ximg exists
[Wed Sep 21 20:31:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src30.csv
[Wed Sep 21 20:31:53 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src30_1.ximg exists
[Wed Sep 21 20:31:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src30.csv
[Wed Sep 21 20:31:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:32:00 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Wed Sep 21 20:32:00 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Sep 21 20:32:00 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Sep 21 20:32:25 2011] Spatial fit model total counts = 18.817500, observed total counts = 19.000000
[Wed Sep 21 20:32:25 2011] Offset between fit and detection position for source 23 = 0.027557 pixels
[Wed Sep 21 20:32:25 2011] 18.183010 total counts/ 6.011110 bgd. counts: snr = 4.964563
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.027557 pixels
  Position = (386.4, 641.1) = 14 25 21.11 35 33 39.2
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.2 +/- 4.3
  Background counts = 6.0
  Rate = 0.0001 +/- 4e-05
[Wed Sep 21 20:32:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:25 2011] Source does appear to be extended
[Wed Sep 21 20:32:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:36:42 2011] Not overwriting source region fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_src.reg
[Wed Sep 21 20:36:42 2011] Extracting stamp from image fullrun_ccd2_acisf03130_pi14-548_cl_sm2.00.img.gz, (364, 619) - (409, 663)
[Wed Sep 21 20:36:42 2011] Writing fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23.gif
[Wed Sep 21 20:38:25 2011] ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_src.evt and ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed Sep 21 20:38:25 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_src.evt.gz[events] = 13 counts
[Wed Sep 21 20:38:25 2011] Mean chipx,y = (448.77, 761.38)
[Wed Sep 21 20:38:25 2011] Mean tdetx,y = (3822.38, 3637.23)
[Wed Sep 21 20:38:25 2011] chipx,y range = (431.00-466.00, 745.00-770.00)
[Wed Sep 21 20:38:25 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 24 counts
[Wed Sep 21 20:38:25 2011] ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_src.img and ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed Sep 21 20:38:25 2011] ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_src.pi and ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed Sep 21 20:38:25 2011] Not generating rmf since there are only 12 counts
[Wed Sep 21 20:38:29 2011] ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed Sep 21 20:39:21 2011] 185.59
[Wed Sep 21 20:43:34 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:34 2011] Error reading totcts from fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Sep 21 20:43:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:35 2011] Using photon index=1.80, rate=0.000101, arf fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src23.arf
[Wed Sep 21 20:43:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:35 2011] Updating source flux to 1.2e-15
[Wed Sep 21 20:44:29 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting