[Wed Sep 21 20:28:10 2011] Detection parameters:
  Position = (878.3, 970.8) = 14 25 1.24 35 36 21.4
  Extent = 2.4" x 1.7", rotation angle = 1 degrees
  Source counts = 62.3 +/- 9.0
  Background counts = 18.7
  Rate = 0.0005 +/- 7e-05

[Wed Sep 21 20:28:13 2011] Off-axis axis estimate = 7.44'
[Wed Sep 21 20:30:11 2011] Using EEF radius (= 2.45 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:11 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Wed Sep 21 20:30:11 2011] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.005
[Wed Sep 21 20:30:11 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.45"
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src11.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src11.csv
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Sep 21 20:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src11.csv
[Wed Sep 21 20:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Sep 21 20:30:13 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Sep 21 20:30:13 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Sep 21 20:30:39 2011] Spatial fit model total counts = 93.112500, observed total counts = 92.000000
[Wed Sep 21 20:30:39 2011] Offset between fit and detection position for source 10 = 1.109180 pixels
[Wed Sep 21 20:30:39 2011] 93.879800 total counts/ 39.858500 bgd. counts: snr = 8.556666
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.109180 pixels
  Position = (878.7, 971.8) = 14 25 1.24 35 36 21.6
  Extent = 2.2 (1.5-3.0)", rotation angle = 0
  Source counts = 54.0 +/- 9.7
  Background counts = 39.9
  Rate = 0.0004 +/- 8e-05
[Wed Sep 21 20:30:39 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:39 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:39 2011] Source does appear to be extended
[Wed Sep 21 20:30:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:51 2011] Initial guess for spatial extent in simple fitting = 2.23"
[Wed Sep 21 20:31:51 2011] source mask rpix=4.5, npix_max = 101, mask sum = 100, frac = 0.990
[Wed Sep 21 20:31:51 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 2.23"
[Wed Sep 21 20:31:52 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src11.ximg exists
[Wed Sep 21 20:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src11.csv
[Wed Sep 21 20:31:52 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Sep 21 20:31:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src11.csv
[Wed Sep 21 20:31:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf03130_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:31:58 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Sep 21 20:31:58 2011] fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Sep 21 20:31:58 2011] Fit fullrun_ccd2_acisf03130_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Sep 21 20:32:25 2011] Spatial fit model total counts = 88.211400, observed total counts = 86.000000
[Wed Sep 21 20:32:25 2011] Offset between fit and detection position for source 10 = 0.423335 pixels
[Wed Sep 21 20:32:25 2011] 88.368400 total counts/ 36.754200 bgd. counts: snr = 8.513648
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.423335 pixels
  Position = (879.1, 971.8) = 14 25 1.22 35 36 21.6
  Extent = 2.1 (1.1-2.9)", rotation angle = 0
  Source counts = 51.6 +/- 9.4
  Background counts = 36.8
  Rate = 0.0004 +/- 8e-05
[Wed Sep 21 20:32:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:25 2011] Source does appear to be extended
[Wed Sep 21 20:32:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:36:42 2011] Not overwriting source region fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_src.reg
[Wed Sep 21 20:36:42 2011] Extracting stamp from image fullrun_ccd2_acisf03130_pi14-548_cl_sm2.00.img.gz, (781, 874) - (977, 1070)
[Wed Sep 21 20:36:42 2011] Writing fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10.gif
[Wed Sep 21 20:37:25 2011] ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_src.evt and ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Sep 21 20:37:25 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_src.evt.gz[events] = 96 counts
[Wed Sep 21 20:37:25 2011] Mean chipx,y = (272.34, 187.22)
[Wed Sep 21 20:37:25 2011] Mean tdetx,y = (3248.22, 3813.66)
[Wed Sep 21 20:37:25 2011] chipx,y range = (240.00-302.00, 157.00-216.00)
[Wed Sep 21 20:37:25 2011] Size of ../../acisf03130/products/events/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 282 counts
[Wed Sep 21 20:37:25 2011] ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_src.img and ../../acisf03130/products/images/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Sep 21 20:37:25 2011] ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_src.pi and ../../acisf03130/products/spectra/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Sep 21 20:37:25 2011] Not generating rmf since there are only 51 counts
[Wed Sep 21 20:37:27 2011] ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Sep 21 20:39:19 2011] 164.127
[Wed Sep 21 20:43:34 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:34 2011] Error reading totcts from fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Sep 21 20:43:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:34 2011] Using photon index=1.80, rate=0.00043, arf fullrun_ccd2_acisf03130_pi14-548_pass1_cl_src10.arf
[Wed Sep 21 20:43:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:34 2011] Updating source flux to 5.7e-15
[Wed Sep 21 20:44:29 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting