[Wed Sep 21 20:28:08 2011] Detection parameters:
  Position = (1111.2, 740.6) = 14 25 44.25 35 40 17.8
  Extent = 0.9" x 0.5", rotation angle = 172 degrees
  Source counts = 12.7 +/- 3.9
  Background counts = 2.3
  Rate = 0.0001 +/- 3e-05

[Wed Sep 21 20:28:09 2011] Off-axis axis estimate = 4.49'
[Wed Sep 21 20:30:09 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:09 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Wed Sep 21 20:30:09 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Wed Sep 21 20:30:09 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.99"
[Wed Sep 21 20:30:10 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src23.ximg exists
[Wed Sep 21 20:30:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src23.csv
[Wed Sep 21 20:30:10 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src23_1.ximg exists
[Wed Sep 21 20:30:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src23.csv
[Wed Sep 21 20:30:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:11 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Wed Sep 21 20:30:11 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Sep 21 20:30:11 2011] Fit fullrun_ccd1_acisf03130_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Sep 21 20:30:33 2011] Spatial fit model total counts = 17.685900, observed total counts = 18.000000
[Wed Sep 21 20:30:33 2011] Offset between fit and detection position for source 31 = 1.183843 pixels
[Wed Sep 21 20:30:33 2011] 17.246780 total counts/ 1.940480 bgd. counts: snr = 10.987924
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.183843 pixels
  Position = (1111.9, 741.5) = 14 25 44.24 35 40 18.0
  Extent = 1.1 (0.2-1.6)", rotation angle = 0
  Source counts = 15.3 +/- 4.2
  Background counts = 1.9
  Rate = 0.0001 +/- 3e-05
[Wed Sep 21 20:30:33 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:33 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:33 2011] Source does appear to be extended
[Wed Sep 21 20:30:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:45 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Wed Sep 21 20:31:45 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Wed Sep 21 20:31:45 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 1.07"
[Wed Sep 21 20:31:50 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src23.ximg exists
[Wed Sep 21 20:31:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src23.csv
[Wed Sep 21 20:31:50 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src23_1.ximg exists
[Wed Sep 21 20:31:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src23.csv
[Wed Sep 21 20:31:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:31:51 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Wed Sep 21 20:31:51 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Sep 21 20:31:51 2011] Fit fullrun_ccd1_acisf03130_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Sep 21 20:32:20 2011] Spatial fit model total counts = 17.374600, observed total counts = 18.000000
[Wed Sep 21 20:32:20 2011] Offset between fit and detection position for source 31 = 0.582176 pixels
[Wed Sep 21 20:32:20 2011] 17.702010 total counts/ 5.574210 bgd. counts: snr = 5.136773
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.582176 pixels
  Position = (1111.8, 740.9) = 14 25 44.24 35 40 17.7
  Extent = 0.8 (0.3-1.2)", rotation angle = 0
  Source counts = 12.1 +/- 4.2
  Background counts = 5.6
  Rate = 0.0001 +/- 4e-05
[Wed Sep 21 20:32:20 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:20 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:20 2011] Source does appear to be extended
[Wed Sep 21 20:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:34:44 2011] Not overwriting source region fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_src.reg
[Wed Sep 21 20:34:44 2011] Extracting stamp from image fullrun_ccd1_acisf03130_pi14-548_cl_sm2.00.img.gz, (1075, 704) - (1149, 778)
[Wed Sep 21 20:34:44 2011] Writing fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31.gif
[Wed Sep 21 20:36:16 2011] ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_src.evt and ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Wed Sep 21 20:36:16 2011] Size of ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_src.evt.gz[events] = 16 counts
[Wed Sep 21 20:36:16 2011] Mean chipx,y = (475.00, 992.88)
[Wed Sep 21 20:36:16 2011] Mean tdetx,y = (4139.12, 4582.00)
[Wed Sep 21 20:36:16 2011] chipx,y range = (454.00-490.00, 980.00-1015.00)
[Wed Sep 21 20:36:16 2011] Size of ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 29 counts
[Wed Sep 21 20:36:16 2011] ../../acisf03130/products/images/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_src.img and ../../acisf03130/products/images/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Wed Sep 21 20:36:16 2011] ../../acisf03130/products/spectra/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_src.pi and ../../acisf03130/products/spectra/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Wed Sep 21 20:36:16 2011] Not generating rmf since there are only 12 counts
[Wed Sep 21 20:36:24 2011] ../../acisf03130/products/lightcurves/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Wed Sep 21 20:36:41 2011] 194.475
[Wed Sep 21 20:43:33 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:33 2011] Error reading totcts from fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31_src.pi.gz
[Wed Sep 21 20:43:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:34 2011] Using photon index=1.80, rate=0.000101, arf fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src31.arf
[Wed Sep 21 20:43:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:34 2011] Updating source flux to 1.1e-15
[Wed Sep 21 20:43:54 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting