[Wed Sep 21 20:28:07 2011] Detection parameters:
  Position = (810.9, 743.0) = 14 25 56.37 35 40 18.9
  Extent = 0.5" x 0.5", rotation angle = 119 degrees
  Source counts = 55.9 +/- 7.7
  Background counts = 4.1
  Rate = 0.0005 +/- 6e-05

[Wed Sep 21 20:28:09 2011] Off-axis axis estimate = 5.73'
[Wed Sep 21 20:30:09 2011] Using EEF radius (= 1.50 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:09 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Sep 21 20:30:09 2011] source mask rpix=3.0, npix_max = 50, mask sum = 48, frac = 0.954
[Wed Sep 21 20:30:09 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.50"
[Wed Sep 21 20:30:10 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src10.ximg exists
[Wed Sep 21 20:30:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src10.csv
[Wed Sep 21 20:30:10 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Sep 21 20:30:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src10.csv
[Wed Sep 21 20:30:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03130_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:11 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Sep 21 20:30:11 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Sep 21 20:30:11 2011] Fit fullrun_ccd1_acisf03130_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Sep 21 20:30:33 2011] Spatial fit model total counts = 119.476000, observed total counts = 126.000000
[Wed Sep 21 20:30:33 2011] Offset between fit and detection position for source 23 = 1.778376 pixels
[Wed Sep 21 20:30:33 2011] 118.768080 total counts/ 5.293080 bgd. counts: snr = 49.322600
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.778376 pixels
  Position = (812.2, 741.9) = 14 25 56.34 35 40 18.1
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 113.5 +/- 10.9
  Background counts = 5.3
  Rate = 0.0009 +/- 9e-05
[Wed Sep 21 20:30:33 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:33 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:33 2011] Source does appear to be extended
[Wed Sep 21 20:30:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:45 2011] Initial guess for spatial extent in simple fitting = 1.38"
[Wed Sep 21 20:31:45 2011] source mask rpix=2.8, npix_max = 43, mask sum = 34, frac = 0.783
[Wed Sep 21 20:31:45 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.38"
[Wed Sep 21 20:31:47 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src10.ximg exists
[Wed Sep 21 20:31:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src10.csv
[Wed Sep 21 20:31:48 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Sep 21 20:31:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src10.csv
[Wed Sep 21 20:31:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf03130_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:31:50 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Sep 21 20:31:50 2011] fullrun_ccd1_acisf03130_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Sep 21 20:31:50 2011] Fit fullrun_ccd1_acisf03130_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Sep 21 20:32:20 2011] Spatial fit model total counts = 117.243000, observed total counts = 124.000000
[Wed Sep 21 20:32:20 2011] Offset between fit and detection position for source 23 = 0.105601 pixels
[Wed Sep 21 20:32:20 2011] 116.744410 total counts/ 4.652410 bgd. counts: snr = 51.967955
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.105601 pixels
  Position = (812.2, 742.0) = 14 25 56.34 35 40 18.1
  Extent = 1.4 (1.1-1.6)", rotation angle = 0
  Source counts = 112.1 +/- 10.8
  Background counts = 4.7
  Rate = 0.0009 +/- 9e-05
[Wed Sep 21 20:32:20 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:20 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:20 2011] Source does appear to be extended
[Wed Sep 21 20:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:34:44 2011] Not overwriting source region fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_src.reg
[Wed Sep 21 20:34:44 2011] Extracting stamp from image fullrun_ccd1_acisf03130_pi14-548_cl_sm2.00.img.gz, (750, 680) - (874, 804)
[Wed Sep 21 20:34:44 2011] Writing fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23.gif
[Wed Sep 21 20:35:31 2011] ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_src.evt and ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed Sep 21 20:35:32 2011] Size of ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_src.evt.gz[events] = 125 counts
[Wed Sep 21 20:35:32 2011] Mean chipx,y = (560.09, 709.34)
[Wed Sep 21 20:35:32 2011] Mean tdetx,y = (4422.66, 4667.09)
[Wed Sep 21 20:35:32 2011] chipx,y range = (539.00-581.00, 688.00-730.00)
[Wed Sep 21 20:35:33 2011] Size of ../../acisf03130/products/events/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 110 counts
[Wed Sep 21 20:35:33 2011] ../../acisf03130/products/images/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_src.img and ../../acisf03130/products/images/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed Sep 21 20:35:33 2011] ../../acisf03130/products/spectra/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_src.pi and ../../acisf03130/products/spectra/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed Sep 21 20:35:37 2011] ../../acisf03130/products/lightcurves/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed Sep 21 20:36:41 2011] Keeping rmf generated by specextract
[Wed Sep 21 20:36:41 2011] 186.745
[Wed Sep 21 20:43:33 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:33 2011] Error reading totcts from fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Sep 21 20:43:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:34 2011] Using photon index=1.80, rate=0.000933, arf fullrun_ccd1_acisf03130_pi14-548_pass1_cl_src23.arf
[Wed Sep 21 20:43:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:34 2011] Updating source flux to 1.1e-14