[Wed Sep 21 20:28:04 2011] Detection parameters:
  Position = (770.8, 208.0) = 14 25 17.75 35 38 21.3
  Extent = 0.5" x 0.5", rotation angle = 39 degrees
  Source counts = 20.0 +/- 4.7
  Background counts = 2.0
  Rate = 0.0002 +/- 4e-05

[Wed Sep 21 20:28:05 2011] Off-axis axis estimate = 4.70'
[Wed Sep 21 20:30:07 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:07 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Wed Sep 21 20:30:07 2011] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.914
[Wed Sep 21 20:30:07 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 1.07"
[Wed Sep 21 20:30:09 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src33.ximg exists
[Wed Sep 21 20:30:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src33.csv
[Wed Sep 21 20:30:09 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src33_1.ximg exists
[Wed Sep 21 20:30:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src33.csv
[Wed Sep 21 20:30:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:09 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Wed Sep 21 20:30:09 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Sep 21 20:30:09 2011] Fit fullrun_ccd0_acisf03130_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Sep 21 20:30:28 2011] Spatial fit model total counts = 35.988000, observed total counts = 32.000000
[Wed Sep 21 20:30:28 2011] Offset between fit and detection position for source 45 = 1.566388 pixels
[Wed Sep 21 20:30:28 2011] 35.300080 total counts/ 2.508480 bgd. counts: snr = 20.704144
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.566388 pixels
  Position = (771.5, 209.3) = 14 25 17.74 35 38 21.7
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 32.8 +/- 5.9
  Background counts = 2.5
  Rate = 0.0003 +/- 5e-05
[Wed Sep 21 20:30:28 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:28 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:28 2011] Source does appear to be extended
[Wed Sep 21 20:30:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:38 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Wed Sep 21 20:31:38 2011] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.717
[Wed Sep 21 20:31:38 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.95"
[Wed Sep 21 20:31:45 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src28.ximg exists
[Wed Sep 21 20:31:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src28.csv
[Wed Sep 21 20:31:45 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src28_1.ximg exists
[Wed Sep 21 20:31:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src28.csv
[Wed Sep 21 20:31:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:31:45 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Wed Sep 21 20:31:45 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Sep 21 20:31:45 2011] Fit fullrun_ccd0_acisf03130_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Sep 21 20:32:17 2011] Warning, spatial fit 27 centroid is now closest to src. 20
[Wed Sep 21 20:32:17 2011] Spatial fit model total counts = 34.897200, observed total counts = 32.000000
[Wed Sep 21 20:32:17 2011] Offset between fit and detection position for source 45 = 0.050767 pixels
[Wed Sep 21 20:32:17 2011] 34.000680 total counts/ 2.258180 bgd. counts: snr = 21.123304
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.050767 pixels
  Position = (771.6, 209.4) = 14 25 17.74 35 38 21.7
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 31.7 +/- 5.8
  Background counts = 2.3
  Rate = 0.0003 +/- 5e-05
[Wed Sep 21 20:32:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:17 2011] Source does appear to be extended
[Wed Sep 21 20:32:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:33:09 2011] Not overwriting source region fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_src.reg
[Wed Sep 21 20:33:09 2011] Extracting stamp from image fullrun_ccd0_acisf03130_pi14-548_cl_sm2.00.img.gz, (728, 166) - (815, 253)
[Wed Sep 21 20:33:09 2011] Writing fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45.gif
[Wed Sep 21 20:34:33 2011] ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_src.evt and ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_bgd.evt exist, delete to re-create
[Wed Sep 21 20:34:33 2011] Size of ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_src.evt.gz[events] = 29 counts
[Wed Sep 21 20:34:33 2011] Mean chipx,y = (964.97, 509.93)
[Wed Sep 21 20:34:33 2011] Mean tdetx,y = (3570.93, 4167.03)
[Wed Sep 21 20:34:33 2011] chipx,y range = (948.00-985.00, 492.00-532.00)
[Wed Sep 21 20:34:34 2011] Size of ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_bgd.evt.gz[events] = 44 counts
[Wed Sep 21 20:34:34 2011] ../../acisf03130/products/images/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_src.img and ../../acisf03130/products/images/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_bgd.img exist, delete to re-create
[Wed Sep 21 20:34:34 2011] ../../acisf03130/products/spectra/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_src.pi and ../../acisf03130/products/spectra/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_bgd.pi exist, delete to re-create
[Wed Sep 21 20:34:34 2011] Not generating rmf since there are only 31 counts
[Wed Sep 21 20:34:37 2011] ../../acisf03130/products/lightcurves/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_bgd.lc exist, delete to re-create
[Wed Sep 21 20:34:43 2011] 180.402
[Wed Sep 21 20:43:33 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:33 2011] Error reading totcts from fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45_src.pi.gz
[Wed Sep 21 20:43:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:33 2011] Using photon index=1.80, rate=0.000264, arf fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src45.arf
[Wed Sep 21 20:43:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:33 2011] Updating source flux to 3.2e-15
[Wed Sep 21 20:43:42 2011] Source 45 has fewer than 100.000000 counts, skipping spectral fitting