[Wed Sep 21 20:28:02 2011] Detection parameters:
  Position = (177.8, 544.1) = 14 25 41.68 35 41 6.8
  Extent = 0.7" x 0.6", rotation angle = 26 degrees
  Source counts = 22.7 +/- 5.0
  Background counts = 2.3
  Rate = 0.0002 +/- 4e-05

[Wed Sep 21 20:28:05 2011] Off-axis axis estimate = 5.17'
[Wed Sep 21 20:30:07 2011] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:30:07 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Wed Sep 21 20:30:07 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Wed Sep 21 20:30:07 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.25"
[Wed Sep 21 20:30:08 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src12.ximg exists
[Wed Sep 21 20:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src12.csv
[Wed Sep 21 20:30:08 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Sep 21 20:30:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src12.csv
[Wed Sep 21 20:30:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03130_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:30:09 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Sep 21 20:30:09 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Sep 21 20:30:09 2011] Fit fullrun_ccd0_acisf03130_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Sep 21 20:30:28 2011] Spatial fit model total counts = 33.908200, observed total counts = 34.000000
[Wed Sep 21 20:30:28 2011] Offset between fit and detection position for source 12 = 0.392297 pixels
[Wed Sep 21 20:30:28 2011] 34.883300 total counts/ 14.568600 bgd. counts: snr = 5.322326
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.392297 pixels
  Position = (177.9, 544.5) = 14 25 41.70 35 41 6.7
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 20.3 +/- 5.9
  Background counts = 14.6
  Rate = 0.0002 +/- 5e-05
[Wed Sep 21 20:30:28 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:30:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:30:28 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:30:28 2011] Source does appear to be extended
[Wed Sep 21 20:30:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:31:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:31:38 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Sep 21 20:31:38 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.911
[Wed Sep 21 20:31:38 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.65"
[Wed Sep 21 20:31:44 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src12.ximg exists
[Wed Sep 21 20:31:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src12.csv
[Wed Sep 21 20:31:44 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src12_1.ximg exists
[Wed Sep 21 20:31:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src12.csv
[Wed Sep 21 20:31:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf03130_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:31:45 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed Sep 21 20:31:45 2011] fullrun_ccd0_acisf03130_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Sep 21 20:31:45 2011] Fit fullrun_ccd0_acisf03130_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Sep 21 20:32:17 2011] Spatial fit model total counts = 30.452700, observed total counts = 31.000000
[Wed Sep 21 20:32:17 2011] Offset between fit and detection position for source 12 = 0.020615 pixels
[Wed Sep 21 20:32:17 2011] 31.054200 total counts/ 10.306400 bgd. counts: snr = 6.462768
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.020615 pixels
  Position = (177.9, 544.5) = 14 25 41.70 35 41 6.7
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 20.7 +/- 5.6
  Background counts = 10.3
  Rate = 0.0002 +/- 5e-05
[Wed Sep 21 20:32:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:32:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:32:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:32:17 2011] Source does appear to be extended
[Wed Sep 21 20:32:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:33:08 2011] Not overwriting source region fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_src.reg
[Wed Sep 21 20:33:08 2011] Extracting stamp from image fullrun_ccd0_acisf03130_pi14-548_cl_sm2.00.img.gz, (148, 515) - (208, 575)
[Wed Sep 21 20:33:08 2011] Writing fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12.gif
[Wed Sep 21 20:33:47 2011] ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_src.evt and ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Wed Sep 21 20:33:47 2011] Size of ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_src.evt.gz[events] = 24 counts
[Wed Sep 21 20:33:47 2011] Mean chipx,y = (474.79, 983.67)
[Wed Sep 21 20:33:47 2011] Mean tdetx,y = (4044.67, 4657.21)
[Wed Sep 21 20:33:47 2011] chipx,y range = (458.00-493.00, 965.00-1004.00)
[Wed Sep 21 20:33:47 2011] Size of ../../acisf03130/products/events/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 36 counts
[Wed Sep 21 20:33:47 2011] ../../acisf03130/products/images/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_src.img and ../../acisf03130/products/images/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Wed Sep 21 20:33:47 2011] ../../acisf03130/products/spectra/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_src.pi and ../../acisf03130/products/spectra/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Wed Sep 21 20:33:47 2011] Not generating rmf since there are only 20 counts
[Wed Sep 21 20:33:50 2011] ../../acisf03130/products/lightcurves/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_src.lc and ../../acisf03130/products/lightcurves/fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Wed Sep 21 20:34:43 2011] 185.316
[Wed Sep 21 20:43:33 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:43:33 2011] Error reading totcts from fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12_src.pi.gz
[Wed Sep 21 20:43:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:43:33 2011] Using photon index=1.80, rate=0.000173, arf fullrun_ccd0_acisf03130_pi14-548_pass1_cl_src12.arf
[Wed Sep 21 20:43:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:43:33 2011] Updating source flux to 2e-15
[Wed Sep 21 20:43:42 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting