[Mon Oct  3 15:32:03 2011] Detection parameters:
  Position = (553.6, 508.2) = 3 8 26.23 4 6 39.4
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 1265.1 +/- 35.7
  Background counts = 9.9
  Rate = 0.2 +/- 0.007

[Mon Oct  3 15:32:05 2011] Off-axis axis estimate = 0.58'
[Mon Oct  3 15:32:36 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:32:36 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct  3 15:32:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.901
[Mon Oct  3 15:32:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Mon Oct  3 15:32:36 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 15:32:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03128_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 15:32:36 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 15:32:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03128_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 15:32:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03128_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03128_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:32:36 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 15:32:36 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 15:32:36 2011] Fit fullrun_ccd7_acisf03128_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 15:32:39 2011] Spatial fit model total counts = 1272.000000, observed total counts = 1272.000000
[Mon Oct  3 15:32:39 2011] Offset between fit and detection position for source 1 = 0.719173 pixels
[Mon Oct  3 15:32:39 2011] 1278.860000 total counts/ 173.090000 bgd. counts: snr = 84.048277
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.719173 pixels
  Position = (554.1, 508.7) = 3 8 26.23 4 6 39.4
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 1105.8 +/- 35.8
  Background counts = 173.1
  Rate = 0.2 +/- 0.007
[Mon Oct  3 15:32:39 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:32:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:32:39 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:32:39 2011] Source does appear to be extended
[Mon Oct  3 15:32:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:32:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:32:50 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Mon Oct  3 15:32:50 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.012
[Mon Oct  3 15:32:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.49"
[Mon Oct  3 15:32:50 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 15:32:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03128_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 15:32:50 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 15:32:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03128_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 15:32:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03128_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03128_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:32:50 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 15:32:50 2011] fullrun_ccd7_acisf03128_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 15:32:50 2011] Fit fullrun_ccd7_acisf03128_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 15:32:53 2011] Spatial fit model total counts = 1272.850000, observed total counts = 1275.000000
[Mon Oct  3 15:32:53 2011] Offset between fit and detection position for source 1 = 0.011420 pixels
[Mon Oct  3 15:32:53 2011] 1274.177000 total counts/ 166.887000 bgd. counts: snr = 85.713677
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011420 pixels
  Position = (554.1, 508.6) = 3 8 26.23 4 6 39.4
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 1107.3 +/- 35.7
  Background counts = 166.9
  Rate = 0.2 +/- 0.007
[Mon Oct  3 15:32:53 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:32:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:32:53 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:32:53 2011] Source does appear to be extended
[Mon Oct  3 15:32:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:33:12 2011] Not overwriting source region fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_src.reg
[Mon Oct  3 15:33:12 2011] Extracting stamp from image fullrun_ccd7_acisf03128_pi14-548_cl_sm2.00.img.gz, (532, 486) - (577, 531)
[Mon Oct  3 15:33:12 2011] Writing fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1.gif
[Mon Oct  3 15:33:13 2011] ../../acisf03128/products/events/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_src.evt and ../../acisf03128/products/events/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct  3 15:33:13 2011] Size of ../../acisf03128/products/events/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1165 counts
[Mon Oct  3 15:33:13 2011] Mean chipx,y = (285.38, 507.26)
[Mon Oct  3 15:33:13 2011] Mean tdetx,y = (4202.38, 2209.26)
[Mon Oct  3 15:33:13 2011] chipx,y range = (266.00-305.00, 488.00-528.00)
[Mon Oct  3 15:33:13 2011] Size of ../../acisf03128/products/events/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 88 counts
[Mon Oct  3 15:33:13 2011] ../../acisf03128/products/images/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_src.img and ../../acisf03128/products/images/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct  3 15:33:13 2011] ../../acisf03128/products/spectra/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_src.pi and ../../acisf03128/products/spectra/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct  3 15:33:16 2011] ../../acisf03128/products/lightcurves/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_src.lc and ../../acisf03128/products/lightcurves/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct  3 15:33:31 2011] Keeping rmf generated by specextract
[Mon Oct  3 15:33:31 2011] 243.902
[Mon Oct  3 15:33:32 2011] Updating aperture counts using extracted products
[Mon Oct  3 15:33:32 2011] Error reading totcts from fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct  3 15:33:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 15:33:32 2011] Using photon index=1.80, rate=0.214, arf fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1.arf
[Mon Oct  3 15:33:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 15:33:32 2011] Updating source flux to 1.4e-12
[Mon Oct  3 15:33:38 2011] Reading fit data from acisf03128/analysis//spectral/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct  3 15:33:38 2011] Spectral fit parameter nH value = 7.00822e+20
[Mon Oct  3 15:33:38 2011] Spectral fit parameter PhoIndex value = 1.62777
[Mon Oct  3 15:33:38 2011] Failed to get F(0.3-8.0) from acisf03128/analysis//spectral/fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 15:33:38 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 15:33:38 2011] Using Nh = 7e+20, photon index=1.63, rate=0.214, arf fullrun_ccd7_acisf03128_pi14-548_pass1_cl_src1.arf
[Mon Oct  3 15:33:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 15:33:38 2011] Updating source flux to 1.6e-12