[Sun Oct  2 05:33:55 2011] Detection parameters:
  Position = (446.8, 439.4) = 14 17 35.10 26 45 23.3
  Extent = 0.8" x 0.5", rotation angle = 82 degrees
  Source counts = 14.7 +/- 3.9
  Background counts = 0.3
  Rate = 0.002 +/- 0.0004

[Sun Oct  2 05:33:56 2011] Off-axis axis estimate = 2.63'
[Sun Oct  2 05:34:34 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 05:34:34 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sun Oct  2 05:34:34 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.945
[Sun Oct  2 05:34:34 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.51"
[Sun Oct  2 05:34:34 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct  2 05:34:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03075_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 05:34:34 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct  2 05:34:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03075_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 05:34:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03075_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03075_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 05:34:34 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct  2 05:34:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03075_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct  2 05:34:34 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct  2 05:34:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03075_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct  2 05:34:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03075_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03075_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 05:34:39 2011] Spatial fit model total counts = 15.311400, observed total counts = 17.000000
[Sun Oct  2 05:34:39 2011] Offset between fit and detection position for source 2 = 0.665966 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.665966 pixels
  Position = (447.4, 439.8) = 14 17 35.10 26 45 23.3
  Extent = 1.0 (0.7-1.5)" x 0.4 (0.3-0.6)", rotation angle = 97 (80-114) degrees
  Source counts = 15.4 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Sun Oct  2 05:34:39 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 05:34:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 05:34:39 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 05:34:39 2011] Source does appear to be extended
[Sun Oct  2 05:34:39 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.16
[Sun Oct  2 05:35:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 05:35:01 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Sun Oct  2 05:35:01 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.075
[Sun Oct  2 05:35:01 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.70"
[Sun Oct  2 05:35:01 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct  2 05:35:01 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct  2 05:35:01 2011] Fit fullrun_ccd7_acisf03075_pi14-548_cl_pass1_src3 appears to have run properly
[Sun Oct  2 05:35:01 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct  2 05:35:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03075_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Oct  2 05:35:01 2011] fullrun_ccd7_acisf03075_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct  2 05:35:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03075_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Oct  2 05:35:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03075_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03075_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 05:35:06 2011] Spatial fit model total counts = 14.929600, observed total counts = 16.000000
[Sun Oct  2 05:35:06 2011] Offset between fit and detection position for source 2 = 0.017492 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.017492 pixels
  Position = (447.4, 439.8) = 14 17 35.10 26 45 23.3
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 15.2 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Sun Oct  2 05:35:06 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 05:35:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 05:35:06 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 05:35:06 2011] Source does appear to be extended
[Sun Oct  2 05:35:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 05:39:07 2011] Not overwriting source region fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_src.reg
[Sun Oct  2 05:39:07 2011] Extracting stamp from image fullrun_ccd7_acisf03075_pi14-548_cl_sm2.00.img.gz, (410, 403) - (484, 477)
[Sun Oct  2 05:39:07 2011] Writing fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2.gif
[Sun Oct  2 05:39:46 2011] ../../acisf03075/products/events/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_src.evt and ../../acisf03075/products/events/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct  2 05:39:47 2011] Size of ../../acisf03075/products/events/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_src.evt.gz[events] = 15 counts
[Sun Oct  2 05:39:47 2011] Mean chipx,y = (379.33, 789.00)
[Sun Oct  2 05:39:47 2011] Mean tdetx,y = (4296.33, 2491.00)
[Sun Oct  2 05:39:47 2011] chipx,y range = (360.00-393.00, 777.00-806.00)
[Sun Oct  2 05:39:47 2011] Size of ../../acisf03075/products/events/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 5 counts
[Sun Oct  2 05:39:47 2011] ../../acisf03075/products/images/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_src.img and ../../acisf03075/products/images/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct  2 05:39:47 2011] Not generating rmf since there are only 15 counts
[Sun Oct  2 05:39:47 2011] arf not found, will run specextract
[Sun Oct  2 05:39:49 2011] ../../acisf03075/products/spectra/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_bkg.pi not found
[Sun Oct  2 05:39:49 2011] ../../acisf03075/products/spectra/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2.warf not found
[Sun Oct  2 05:39:49 2011] ../../acisf03075/products/spectra/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2.wrmf not found
[Sun Oct  2 05:39:49 2011] Removal of ../../acisf03075/products/spectra/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2.soff failed
[Sun Oct  2 05:39:49 2011] Failed to rename ../../acisf03075/products/spectra/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_grp.pi to ../../acisf03075/products/spectra/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_src.pi
[Sun Oct  2 05:40:00 2011] ../../acisf03075/products/lightcurves/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_src.lc and ../../acisf03075/products/lightcurves/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct  2 05:41:20 2011] No arf file found
[Sun Oct  2 05:41:23 2011] Updating aperture counts using extracted products
[Sun Oct  2 05:41:23 2011] Error reading totcts from fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_src.pi
[Sun Oct  2 05:41:23 2011] No arf file for this source, not re-computing flux
[Sun Oct  2 05:41:28 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  2 05:41:29 2011] acisf03075/analysis//spectral/fullrun_ccd7_acisf03075_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete