[Sun Oct  2 05:33:54 2011] Detection parameters:
  Position = (698.2, 1133.1) = 14 17 59.98 26 54 9.5
  Extent = 1.4" x 0.9", rotation angle = 67 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.001 +/- 0.0004

[Sun Oct  2 05:33:54 2011] Off-axis axis estimate = 8.04'
[Sun Oct  2 05:34:33 2011] Using EEF radius (= 2.86 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 05:34:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 05:34:33 2011] Initial guess for spatial extent in simple fitting = 2.86"
[Sun Oct  2 05:34:33 2011] source mask rpix=5.8, npix_max = 159, mask sum = 140, frac = 0.878
[Sun Oct  2 05:34:33 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.86"
[Sun Oct  2 05:34:34 2011] fullrun_ccd6_acisf03075_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct  2 05:34:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03075_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 05:34:34 2011] fullrun_ccd6_acisf03075_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct  2 05:34:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03075_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 05:34:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03075_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03075_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 05:34:34 2011] fullrun_ccd6_acisf03075_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct  2 05:34:34 2011] fullrun_ccd6_acisf03075_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct  2 05:34:34 2011] Fit fullrun_ccd6_acisf03075_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct  2 05:34:38 2011] Spatial fit model total counts = 28.671600, observed total counts = 34.000000
[Sun Oct  2 05:34:38 2011] Offset between fit and detection position for source 5 = 1.222896 pixels
[Sun Oct  2 05:34:38 2011] 28.913310 total counts/ 21.116600 bgd. counts: snr = 1.696678
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.222896 pixels
  Position = (697.4, 1132.1) = 14 18 0.03 26 54 8.8
  Extent = 1.6" x 0.6", rotation angle = 0
  Source counts = 7.8 +/- 5.4
  Background counts = 21.1
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability