[Sun Oct  2 23:16:27 2011] Detection parameters:
  Position = (274.4, 834.2) = 9 6 29.80 16 46 53.0
  Extent = 0.8" x 0.5", rotation angle = 16 degrees
  Source counts = 10.0 +/- 3.5
  Background counts = 2.0
  Rate = 0.0003 +/- 0.0001

[Sun Oct  2 23:16:28 2011] Off-axis axis estimate = 0.78'
[Sun Oct  2 23:16:47 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 23:16:47 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct  2 23:16:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Sun Oct  2 23:16:47 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.38"
[Sun Oct  2 23:16:48 2011] fullrun_ccd7_acisf03054_pi14-548_cl_pass0_src5.ximg exists
[Sun Oct  2 23:16:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03054_pi14-548_cl_pass0_src5.csv
[Sun Oct  2 23:16:48 2011] fullrun_ccd7_acisf03054_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Oct  2 23:16:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03054_pi14-548_cl_pass0_src5.csv
[Sun Oct  2 23:16:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03054_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03054_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 23:16:48 2011] fullrun_ccd7_acisf03054_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Oct  2 23:16:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03054_pi14-548_cl_pass0_tfrozen_src5.csv
[Sun Oct  2 23:16:48 2011] fullrun_ccd7_acisf03054_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Oct  2 23:16:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03054_pi14-548_cl_pass0_tfrozen_src5.csv
[Sun Oct  2 23:16:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03054_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03054_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 23:16:51 2011] Spatial fit model total counts = 13.967300, observed total counts = 15.000000
[Sun Oct  2 23:16:51 2011] Offset between fit and detection position for source 6 = 1.029967 pixels
[Sun Oct  2 23:16:51 2011] 13.943478 total counts/ 0.047978 bgd. counts: snr = 63.438464
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.029967 pixels
  Position = (275.3, 833.7) = 9 6 29.78 16 46 52.5
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sun Oct  2 23:16:51 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 23:16:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 23:16:51 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 23:16:51 2011] Source does appear to be extended
[Sun Oct  2 23:16:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 23:16:51 2011] Deleting source due to low Poisson probability 0.9