[Mon Oct 17 16:26:49 2011] Detection parameters:
  Position = (336.4, 622.7) = 9 41 25.32 59 45 8.2
  Extent = 0.8" x 0.5", rotation angle = 52 degrees
  Source counts = 10.7 +/- 3.6
  Background counts = 2.3
  Rate = 0.003 +/- 0.0009

[Mon Oct 17 16:26:49 2011] Off-axis axis estimate = 3.28'
[Mon Oct 17 16:27:17 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 16:27:17 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Mon Oct 17 16:27:17 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.925
[Mon Oct 17 16:27:17 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.64"
[Mon Oct 17 16:27:18 2011] fullrun_ccd7_acisf03035_pi14-548_cl_pass0_src4.ximg exists
[Mon Oct 17 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03035_pi14-548_cl_pass0_src4.csv
[Mon Oct 17 16:27:18 2011] fullrun_ccd7_acisf03035_pi14-548_cl_pass0_src4_1.ximg exists
[Mon Oct 17 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03035_pi14-548_cl_pass0_src4.csv
[Mon Oct 17 16:27:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03035_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03035_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:27:18 2011] fullrun_ccd7_acisf03035_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon Oct 17 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03035_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Oct 17 16:27:18 2011] fullrun_ccd7_acisf03035_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Oct 17 16:27:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf03035_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Oct 17 16:27:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf03035_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf03035_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:27:21 2011] Spatial fit model total counts = 2.175690, observed total counts = 3.000000
[Mon Oct 17 16:27:21 2011] Offset between fit and detection position for source 2 = 3.001928 pixels
[Mon Oct 17 16:27:21 2011] 2.185779 total counts/ 0.135939 bgd. counts: snr = 5.559656
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.001928 pixels
  Position = (334.1, 624.7) = 9 41 25.51 59 45 8.9
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 2.0 +/- 1.5
  Background counts = 0.1
  Rate = 0.002 +/- 0.001
[Mon Oct 17 16:27:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 16:27:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 16:27:21 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 16:27:21 2011] Source does appear to be extended
[Mon Oct 17 16:27:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 16:27:21 2011] Deleting source due to low Poisson probability 0.9