[Sat Oct 29 05:54:52 2011] Detection parameters:
  Position = (219.4, 362.6) = 0 15 27.54 79 12 39.2
  Extent = 0.9" x 0.7", rotation angle = 160 degrees
  Source counts = 134.1 +/- 11.7
  Background counts = 3.9
  Rate = 0.004 +/- 0.0003

[Sat Oct 29 05:54:53 2011] Off-axis axis estimate = 4.80'
[Sat Oct 29 05:55:57 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:55:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 05:55:57 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Sat Oct 29 05:55:57 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.834
[Sat Oct 29 05:55:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.10"
[Sat Oct 29 05:55:58 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 05:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03009_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 05:55:58 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 05:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03009_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 05:55:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03009_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03009_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:55:59 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 05:55:59 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 05:55:59 2011] Fit fullrun_ccd6_acisf03009_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 05:56:10 2011] Spatial fit model total counts = 141.042000, observed total counts = 140.000000
[Sat Oct 29 05:56:10 2011] Offset between fit and detection position for source 15 = 0.540753 pixels
[Sat Oct 29 05:56:10 2011] 143.362800 total counts/ 38.733800 bgd. counts: snr = 16.811522
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.540753 pixels
  Position = (219.7, 363.1) = 0 15 27.57 79 12 39.2
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 104.6 +/- 12.0
  Background counts = 38.7
  Rate = 0.003 +/- 0.0003
[Sat Oct 29 05:56:10 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:56:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:56:10 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 05:56:10 2011] Source does appear to be extended
[Sat Oct 29 05:56:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 05:56:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 05:56:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 05:56:34 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Sat Oct 29 05:56:34 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Sat Oct 29 05:56:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.08"
[Sat Oct 29 05:56:34 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 05:56:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03009_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 05:56:34 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 05:56:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf03009_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 05:56:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf03009_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf03009_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 05:56:35 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 05:56:35 2011] fullrun_ccd6_acisf03009_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 05:56:35 2011] Fit fullrun_ccd6_acisf03009_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 05:56:47 2011] Spatial fit model total counts = 140.475000, observed total counts = 140.000000
[Sat Oct 29 05:56:47 2011] Offset between fit and detection position for source 15 = 0.161057 pixels
[Sat Oct 29 05:56:47 2011] 141.020400 total counts/ 30.866400 bgd. counts: snr = 19.827013
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.161057 pixels
  Position = (219.9, 363.1) = 0 15 27.55 79 12 39.2
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 110.2 +/- 11.9
  Background counts = 30.9
  Rate = 0.003 +/- 0.0003
[Sat Oct 29 05:56:47 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 05:56:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 05:56:47 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 05:56:47 2011] Source does appear to be extended
[Sat Oct 29 05:56:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 05:57:46 2011] Not overwriting source region fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_src.reg
[Sat Oct 29 05:57:46 2011] Extracting stamp from image fullrun_ccd6_acisf03009_pi14-548_cl_sm2.00.img.gz, (168, 311) - (272, 415)
[Sat Oct 29 05:57:46 2011] Writing fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15.gif
[Sat Oct 29 05:57:48 2011] ../../acisf03009/products/events/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_src.evt and ../../acisf03009/products/events/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sat Oct 29 05:57:48 2011] Size of ../../acisf03009/products/events/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_src.evt.gz[events] = 138 counts
[Sat Oct 29 05:57:48 2011] Mean chipx,y = (825.16, 119.51)
[Sat Oct 29 05:57:48 2011] Mean tdetx,y = (3700.16, 1821.51)
[Sat Oct 29 05:57:48 2011] chipx,y range = (802.00-849.00, 101.00-140.00)
[Sat Oct 29 05:57:48 2011] Size of ../../acisf03009/products/events/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 38 counts
[Sat Oct 29 05:57:48 2011] ../../acisf03009/products/images/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_src.img and ../../acisf03009/products/images/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sat Oct 29 05:57:48 2011] ../../acisf03009/products/spectra/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_src.pi and ../../acisf03009/products/spectra/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sat Oct 29 05:57:51 2011] ../../acisf03009/products/lightcurves/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_src.lc and ../../acisf03009/products/lightcurves/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sat Oct 29 05:58:32 2011] Keeping rmf generated by specextract
[Sat Oct 29 05:58:32 2011] 201.678
[Sat Oct 29 06:00:01 2011] Updating aperture counts using extracted products
[Sat Oct 29 06:00:01 2011] Error reading totcts from fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_src.pi.gz
[Sat Oct 29 06:00:02 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 06:00:02 2011] Using photon index=1.80, rate=0.00302, arf fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15.arf
[Sat Oct 29 06:00:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 06:00:02 2011] Updating source flux to 3.2e-14
[Sat Oct 29 06:00:24 2011] Reading fit data from acisf03009/analysis//spectral/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_pl.csv
[Sat Oct 29 06:00:24 2011] Spectral fit parameter nH value = 7.15089e+15
[Sat Oct 29 06:00:24 2011] Spectral fit parameter PhoIndex value = 1.09156
[Sat Oct 29 06:00:24 2011] Failed to get F(0.3-8.0) from acisf03009/analysis//spectral/fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 06:00:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 06:00:24 2011] Using Nh = 7.2e+15, photon index=1.09, rate=0.00302, arf fullrun_ccd6_acisf03009_pi14-548_pass1_cl_src15.arf
[Sat Oct 29 06:00:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 06:00:24 2011] Updating source flux to 4.2e-14