[Tue Apr 10 20:03:16 2012] Detection parameters:
  Position = (448.6, 1023.3) = 12 50 36.08 25 32 19.4
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.0005 +/- 0.0001

[Tue Apr 10 20:03:21 2012] Off-axis axis estimate = 0.88'
[Tue Apr 10 20:04:10 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 20:04:10 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Apr 10 20:04:10 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.387
[Tue Apr 10 20:04:10 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.38"
[Tue Apr 10 20:04:11 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass0_src27.ximg exists
[Tue Apr 10 20:04:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02976_pi14-548_cl_pass0_src27.csv
[Tue Apr 10 20:04:11 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass0_src27_1.ximg exists
[Tue Apr 10 20:04:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02976_pi14-548_cl_pass0_src27.csv
[Tue Apr 10 20:04:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02976_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02976_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:04:12 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Tue Apr 10 20:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02976_pi14-548_cl_pass0_tfrozen_src27.csv
[Tue Apr 10 20:04:12 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Apr 10 20:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02976_pi14-548_cl_pass0_tfrozen_src27.csv
[Tue Apr 10 20:04:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02976_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02976_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:04:22 2012] Spatial fit model total counts = 13.557500, observed total counts = 15.000000
[Tue Apr 10 20:04:22 2012] Offset between fit and detection position for source 30 = 0.737882 pixels
[Tue Apr 10 20:04:22 2012] 12.586300 total counts/ 0.000000 bgd. counts: snr = 163259616644905.593750
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.737882 pixels
  Position = (449.0, 1023.9) = 12 50 36.09 25 32 19.4
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 12.6 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Tue Apr 10 20:04:22 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 20:04:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 20:04:22 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 20:04:22 2012] Source does appear to be extended
[Tue Apr 10 20:04:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 20:04:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 20:04:44 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Apr 10 20:04:44 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.303
[Tue Apr 10 20:04:44 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 0.62"
[Tue Apr 10 20:04:46 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass1_src27.ximg exists
[Tue Apr 10 20:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02976_pi14-548_cl_pass1_src27.csv
[Tue Apr 10 20:04:46 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass1_src27_1.ximg exists
[Tue Apr 10 20:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02976_pi14-548_cl_pass1_src27.csv
[Tue Apr 10 20:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02976_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02976_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:04:47 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue Apr 10 20:04:47 2012] fullrun_ccd7_acisf02976_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Apr 10 20:04:47 2012] Fit fullrun_ccd7_acisf02976_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Apr 10 20:04:57 2012] Spatial fit model total counts = 14.956300, observed total counts = 15.000000
[Tue Apr 10 20:04:57 2012] Offset between fit and detection position for source 30 = 0.094680 pixels
[Tue Apr 10 20:04:57 2012] 14.659260 total counts/ 3.061460 bgd. counts: snr = 6.628440
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.094680 pixels
  Position = (449.1, 1023.8) = 12 50 36.08 25 32 19.4
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 11.6 +/- 3.8
  Background counts = 3.1
  Rate = 0.0005 +/- 0.0002
[Tue Apr 10 20:04:57 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 20:04:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 20:04:57 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 20:04:57 2012] Source does appear to be extended
[Tue Apr 10 20:04:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 20:08:55 2012] Not overwriting source region fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_src.reg
[Tue Apr 10 20:08:55 2012] Extracting stamp from image fullrun_ccd7_acisf02976_pi14-548_cl_sm2.00.img.gz, (421, 996) - (477, 1052)
[Tue Apr 10 20:08:55 2012] Writing fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30.gif
[Tue Apr 10 20:12:02 2012] ../../acisf02976/products/events/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_src.evt and ../../acisf02976/products/events/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Tue Apr 10 20:12:02 2012] Size of ../../acisf02976/products/events/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_src.evt.gz[events] = 13 counts
[Tue Apr 10 20:12:02 2012] Mean chipx,y = (115.46, 549.08)
[Tue Apr 10 20:12:02 2012] Mean tdetx,y = (4032.46, 2251.08)
[Tue Apr 10 20:12:02 2012] chipx,y range = (100.00-131.00, 536.00-569.00)
[Tue Apr 10 20:12:02 2012] Size of ../../acisf02976/products/events/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 11 counts
[Tue Apr 10 20:12:02 2012] ../../acisf02976/products/images/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_src.img and ../../acisf02976/products/images/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Tue Apr 10 20:12:02 2012] Not generating rmf since there are only 11 counts
[Tue Apr 10 20:12:02 2012] arf not found, will run specextract
[Tue Apr 10 20:12:04 2012] ../../acisf02976/products/spectra/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_bkg.pi not found
[Tue Apr 10 20:12:04 2012] ../../acisf02976/products/spectra/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30.warf not found
[Tue Apr 10 20:12:04 2012] ../../acisf02976/products/spectra/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30.wrmf not found
[Tue Apr 10 20:12:04 2012] Removal of ../../acisf02976/products/spectra/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30.soff failed
[Tue Apr 10 20:12:04 2012] Failed to rename ../../acisf02976/products/spectra/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_grp.pi to ../../acisf02976/products/spectra/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_src.pi
[Tue Apr 10 20:12:09 2012] ../../acisf02976/products/lightcurves/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_src.lc and ../../acisf02976/products/lightcurves/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Tue Apr 10 20:14:13 2012] No arf file found
[Tue Apr 10 20:14:17 2012] Updating aperture counts using extracted products
[Tue Apr 10 20:14:17 2012] Error reading totcts from fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_src.pi
[Tue Apr 10 20:14:17 2012] No arf file for this source, not re-computing flux
[Tue Apr 10 20:14:24 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Apr 10 20:14:25 2012] acisf02976/analysis//spectral/fullrun_ccd7_acisf02976_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete