[Wed Sep 28 17:43:12 2011] Detection parameters:
  Position = (331.9, 692.8) = 21 55 9.38 -9 20 23.7
  Extent = 0.6" x 0.5", rotation angle = 43 degrees
  Source counts = 149.1 +/- 12.2
  Background counts = 0.9
  Rate = 0.02 +/- 0.001

[Wed Sep 28 17:43:13 2011] Off-axis axis estimate = 3.18'
[Wed Sep 28 17:43:51 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:43:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 17:43:51 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Sep 28 17:43:51 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.301
[Wed Sep 28 17:43:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62"
[Wed Sep 28 17:43:52 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 17:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02957_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 17:43:52 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 17:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02957_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 17:43:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02957_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02957_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:43:53 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 17:43:54 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 17:43:54 2011] Fit fullrun_ccd7_acisf02957_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 17:44:01 2011] Spatial fit model total counts = 151.716000, observed total counts = 152.000000
[Wed Sep 28 17:44:01 2011] Offset between fit and detection position for source 1 = 0.736445 pixels
[Wed Sep 28 17:44:01 2011] 151.895870 total counts/ 5.772870 bgd. counts: snr = 60.816678
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.736445 pixels
  Position = (332.5, 693.3) = 21 55 9.38 -9 20 23.7
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 146.1 +/- 12.3
  Background counts = 5.8
  Rate = 0.02 +/- 0.001
[Wed Sep 28 17:44:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:44:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:44:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:44:01 2011] Source does appear to be extended
[Wed Sep 28 17:44:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:44:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:44:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 17:44:18 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Wed Sep 28 17:44:18 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.825
[Wed Sep 28 17:44:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.69"
[Wed Sep 28 17:44:18 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 17:44:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02957_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 17:44:18 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 17:44:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02957_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 17:44:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02957_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02957_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:44:19 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 17:44:19 2011] fullrun_ccd7_acisf02957_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 17:44:19 2011] Fit fullrun_ccd7_acisf02957_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 17:44:24 2011] Spatial fit model total counts = 150.711000, observed total counts = 151.000000
[Wed Sep 28 17:44:24 2011] Offset between fit and detection position for source 1 = 0.028547 pixels
[Wed Sep 28 17:44:24 2011] 150.457020 total counts/ 2.970020 bgd. counts: snr = 85.580349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028547 pixels
  Position = (332.5, 693.3) = 21 55 9.37 -9 20 23.7
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 147.5 +/- 12.3
  Background counts = 3.0
  Rate = 0.02 +/- 0.001
[Wed Sep 28 17:44:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:44:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:44:24 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:44:24 2011] Source does appear to be extended
[Wed Sep 28 17:44:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:45:06 2011] Not overwriting source region fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 17:45:06 2011] Extracting stamp from image fullrun_ccd7_acisf02957_pi14-548_cl_sm2.00.img.gz, (300, 661) - (365, 726)
[Wed Sep 28 17:45:06 2011] Writing fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 17:45:10 2011] ../../acisf02957/products/events/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_src.evt and ../../acisf02957/products/events/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 17:45:10 2011] Size of ../../acisf02957/products/events/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_src.evt.gz[events] = 149 counts
[Wed Sep 28 17:45:10 2011] Mean chipx,y = (426.61, 193.74)
[Wed Sep 28 17:45:10 2011] Mean tdetx,y = (4343.61, 1895.74)
[Wed Sep 28 17:45:10 2011] chipx,y range = (409.00-448.00, 176.00-214.00)
[Wed Sep 28 17:45:10 2011] Size of ../../acisf02957/products/events/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 10 counts
[Wed Sep 28 17:45:10 2011] ../../acisf02957/products/images/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_src.img and ../../acisf02957/products/images/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 17:45:10 2011] ../../acisf02957/products/spectra/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_src.pi and ../../acisf02957/products/spectra/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 17:45:13 2011] ../../acisf02957/products/lightcurves/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_src.lc and ../../acisf02957/products/lightcurves/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 17:46:03 2011] Keeping rmf generated by specextract
[Wed Sep 28 17:46:03 2011] 233.768
[Wed Sep 28 17:46:05 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:46:05 2011] Error reading totcts from fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 17:46:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:46:05 2011] Using photon index=1.80, rate=0.0157, arf fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 17:46:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:46:05 2011] Updating source flux to 1e-13
[Wed Sep 28 17:46:19 2011] Reading fit data from acisf02957/analysis//spectral/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 28 17:46:19 2011] Spectral fit parameter nH value = 1.19657e+14
[Wed Sep 28 17:46:19 2011] Spectral fit parameter PhoIndex value = 2.25871
[Wed Sep 28 17:46:19 2011] Failed to get F(0.3-8.0) from acisf02957/analysis//spectral/fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 17:46:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:46:19 2011] Using Nh = 1.2e+14, photon index=2.26, rate=0.0157, arf fullrun_ccd7_acisf02957_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 17:46:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:46:19 2011] Updating source flux to 8.6e-14