[Mon Oct 17 16:32:45 2011] Detection parameters:
  Position = (278.8, 866.8) = 17 45 32.67 -29 1 18.7
  Extent = 0.5" x 0.5", rotation angle = 63 degrees
  Source counts = 11.0 +/- 3.5
  Background counts = 1.0
  Rate = 0.0009 +/- 0.0003

[Mon Oct 17 16:32:46 2011] Off-axis axis estimate = 2.05'
[Mon Oct 17 16:33:31 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 16:33:31 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Mon Oct 17 16:33:31 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.174
[Mon Oct 17 16:33:31 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.44"
[Mon Oct 17 16:33:32 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass0_src17.ximg exists
[Mon Oct 17 16:33:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02953_pi14-548_cl_pass0_src17.csv
[Mon Oct 17 16:33:32 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass0_src17_1.ximg exists
[Mon Oct 17 16:33:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02953_pi14-548_cl_pass0_src17.csv
[Mon Oct 17 16:33:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02953_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02953_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:33:32 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Mon Oct 17 16:33:32 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Oct 17 16:33:32 2011] Fit fullrun_ccd3_acisf02953_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Oct 17 16:33:46 2011] Spatial fit model total counts = 15.156200, observed total counts = 15.000000
[Mon Oct 17 16:33:46 2011] Offset between fit and detection position for source 11 = 0.756817 pixels
[Mon Oct 17 16:33:46 2011] 15.170460 total counts/ 3.527960 bgd. counts: snr = 6.198469
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.756817 pixels
  Position = (279.4, 867.4) = 17 45 32.67 -29 1 18.6
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 11.6 +/- 3.9
  Background counts = 3.5
  Rate = 0.001 +/- 0.0003
[Mon Oct 17 16:33:46 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 16:33:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 16:33:46 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 16:33:46 2011] Source does appear to be extended
[Mon Oct 17 16:33:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 16:34:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 16:34:04 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Mon Oct 17 16:34:04 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.163
[Mon Oct 17 16:34:04 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.44"
[Mon Oct 17 16:34:06 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct 17 16:34:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02953_pi14-548_cl_pass1_src15.csv
[Mon Oct 17 16:34:06 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct 17 16:34:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02953_pi14-548_cl_pass1_src15.csv
[Mon Oct 17 16:34:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02953_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02953_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:34:07 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct 17 16:34:07 2011] fullrun_ccd3_acisf02953_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct 17 16:34:07 2011] Fit fullrun_ccd3_acisf02953_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Oct 17 16:34:16 2011] Spatial fit model total counts = 15.088400, observed total counts = 15.000000
[Mon Oct 17 16:34:16 2011] Offset between fit and detection position for source 11 = 0.001897 pixels
[Mon Oct 17 16:34:16 2011] 15.104370 total counts/ 3.500370 bgd. counts: snr = 6.202271
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.001897 pixels
  Position = (279.4, 867.4) = 17 45 32.67 -29 1 18.6
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 11.6 +/- 3.9
  Background counts = 3.5
  Rate = 0.001 +/- 0.0003
[Mon Oct 17 16:34:16 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 16:34:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 16:34:16 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 16:34:16 2011] Source does appear to be extended
[Mon Oct 17 16:34:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 16:36:17 2011] Not overwriting source region fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_src.reg
[Mon Oct 17 16:36:17 2011] Extracting stamp from image fullrun_ccd3_acisf02953_pi14-548_cl_sm2.00.img.gz, (259, 847) - (299, 887)
[Mon Oct 17 16:36:17 2011] Writing fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11.gif
[Mon Oct 17 16:36:55 2011] ../../acisf02953/products/events/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_src.evt and ../../acisf02953/products/events/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Mon Oct 17 16:36:55 2011] Size of ../../acisf02953/products/events/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_src.evt.gz[events] = 12 counts
[Mon Oct 17 16:36:55 2011] Mean chipx,y = (772.83, 848.25)
[Mon Oct 17 16:36:55 2011] Mean tdetx,y = (4283.75, 3833.83)
[Mon Oct 17 16:36:55 2011] chipx,y range = (757.00-787.00, 832.00-860.00)
[Mon Oct 17 16:36:55 2011] Size of ../../acisf02953/products/events/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 11 counts
[Mon Oct 17 16:36:55 2011] ../../acisf02953/products/images/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_src.img and ../../acisf02953/products/images/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Mon Oct 17 16:36:55 2011] ../../acisf02953/products/spectra/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_src.pi and ../../acisf02953/products/spectra/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Mon Oct 17 16:36:55 2011] Not generating rmf since there are only 11 counts
[Mon Oct 17 16:36:58 2011] ../../acisf02953/products/lightcurves/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_src.lc and ../../acisf02953/products/lightcurves/fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Mon Oct 17 16:37:06 2011] 194.506
[Mon Oct 17 16:37:12 2011] Updating aperture counts using extracted products
[Mon Oct 17 16:37:12 2011] Error reading totcts from fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11_src.pi.gz
[Mon Oct 17 16:37:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 16:37:12 2011] Using photon index=1.80, rate=0.000982, arf fullrun_ccd3_acisf02953_pi14-548_pass1_cl_src11.arf
[Mon Oct 17 16:37:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 16:37:12 2011] Updating source flux to 1.6e-14
[Mon Oct 17 16:37:18 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting