[Fri Oct 28 08:54:44 2011] Detection parameters:
  Position = (198.9, 861.6) = 17 45 35.57 -29 1 24.0
  Extent = 0.5" x 0.5", rotation angle = 143 degrees
  Source counts = 64.9 +/- 8.2
  Background counts = 3.1
  Rate = 0.005 +/- 0.0007

[Fri Oct 28 08:54:46 2011] Off-axis axis estimate = 1.61'
[Fri Oct 28 08:55:34 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 08:55:34 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct 28 08:55:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.874
[Fri Oct 28 08:55:34 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.40"
[Fri Oct 28 08:55:34 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 28 08:55:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02952_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 08:55:34 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 28 08:55:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02952_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 08:55:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02952_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02952_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:55:34 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 28 08:55:34 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 28 08:55:34 2011] Fit fullrun_ccd3_acisf02952_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 28 08:55:44 2011] Spatial fit model total counts = 71.999500, observed total counts = 72.000000
[Fri Oct 28 08:55:44 2011] Offset between fit and detection position for source 15 = 0.709343 pixels
[Fri Oct 28 08:55:44 2011] 71.817400 total counts/ 10.878900 bgd. counts: snr = 18.475630
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.709343 pixels
  Position = (199.4, 862.1) = 17 45 35.57 -29 1 24.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 60.9 +/- 8.5
  Background counts = 10.9
  Rate = 0.005 +/- 0.0007
[Fri Oct 28 08:55:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 08:55:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 08:55:44 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 08:55:44 2011] Source does appear to be extended
[Fri Oct 28 08:55:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 08:56:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 08:56:01 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Oct 28 08:56:01 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.837
[Fri Oct 28 08:56:01 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.41"
[Fri Oct 28 08:56:01 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct 28 08:56:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02952_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 08:56:01 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct 28 08:56:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02952_pi14-548_cl_pass1_src5.csv
[Fri Oct 28 08:56:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02952_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02952_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:56:01 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 28 08:56:01 2011] fullrun_ccd3_acisf02952_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 28 08:56:01 2011] Fit fullrun_ccd3_acisf02952_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct 28 08:56:09 2011] Spatial fit model total counts = 73.999900, observed total counts = 74.000000
[Fri Oct 28 08:56:09 2011] Offset between fit and detection position for source 15 = 0.004434 pixels
[Fri Oct 28 08:56:09 2011] 73.938200 total counts/ 13.303500 bgd. counts: snr = 16.624105
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.004434 pixels
  Position = (199.4, 862.1) = 17 45 35.57 -29 1 24.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 60.6 +/- 8.6
  Background counts = 13.3
  Rate = 0.005 +/- 0.0007
[Fri Oct 28 08:56:09 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 08:56:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 08:56:09 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 08:56:09 2011] Source does appear to be extended
[Fri Oct 28 08:56:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 08:58:37 2011] Not overwriting source region fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_src.reg
[Fri Oct 28 08:58:37 2011] Extracting stamp from image fullrun_ccd3_acisf02952_pi14-548_cl_sm2.00.img.gz, (181, 843) - (218, 881)
[Fri Oct 28 08:58:37 2011] Writing fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15.gif
[Fri Oct 28 08:58:49 2011] ../../acisf02952/products/events/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_src.evt and ../../acisf02952/products/events/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Fri Oct 28 08:58:49 2011] Size of ../../acisf02952/products/events/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_src.evt.gz[events] = 62 counts
[Fri Oct 28 08:58:49 2011] Mean chipx,y = (843.55, 849.40)
[Fri Oct 28 08:58:49 2011] Mean tdetx,y = (4282.60, 3904.55)
[Fri Oct 28 08:58:49 2011] chipx,y range = (827.00-861.00, 832.00-865.00)
[Fri Oct 28 08:58:49 2011] Size of ../../acisf02952/products/events/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 17 counts
[Fri Oct 28 08:58:49 2011] ../../acisf02952/products/images/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_src.img and ../../acisf02952/products/images/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Fri Oct 28 08:58:49 2011] ../../acisf02952/products/spectra/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_src.pi and ../../acisf02952/products/spectra/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Fri Oct 28 08:58:49 2011] Not generating rmf since there are only 60 counts
[Fri Oct 28 08:58:52 2011] ../../acisf02952/products/lightcurves/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_src.lc and ../../acisf02952/products/lightcurves/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Fri Oct 28 08:58:58 2011] 202.319
[Fri Oct 28 08:59:05 2011] Updating aperture counts using extracted products
[Fri Oct 28 08:59:05 2011] Error reading totcts from fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_src.pi.gz
[Fri Oct 28 08:59:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 08:59:05 2011] Using photon index=1.80, rate=0.00511, arf fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15.arf
[Fri Oct 28 08:59:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 08:59:05 2011] Updating source flux to 7.8e-14
[Fri Oct 28 08:59:10 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 08:59:11 2011] acisf02952/analysis//spectral/fullrun_ccd3_acisf02952_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete