[Fri Oct 28 08:54:39 2011] Detection parameters:
  Position = (766.2, 235.9) = 17 45 54.42 -28 58 16.8
  Extent = 0.8" x 0.5", rotation angle = 174 degrees
  Source counts = 18.9 +/- 4.6
  Background counts = 2.1
  Rate = 0.002 +/- 0.0004

[Fri Oct 28 08:54:41 2011] Off-axis axis estimate = 3.60'
[Fri Oct 28 08:55:31 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 08:55:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 08:55:31 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Oct 28 08:55:31 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.042
[Fri Oct 28 08:55:31 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.72"
[Fri Oct 28 08:55:32 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 08:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02952_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 08:55:32 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 08:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02952_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 08:55:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02952_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02952_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:55:32 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 08:55:32 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 08:55:32 2011] Fit fullrun_ccd0_acisf02952_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 28 08:55:40 2011] Spatial fit model total counts = 25.965600, observed total counts = 26.000000
[Fri Oct 28 08:55:40 2011] Offset between fit and detection position for source 3 = 0.726309 pixels
[Fri Oct 28 08:55:40 2011] 26.557640 total counts/ 7.510340 bgd. counts: snr = 6.950301
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.726309 pixels
  Position = (766.8, 236.4) = 17 45 54.42 -28 58 16.9
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 19.0 +/- 5.2
  Background counts = 7.5
  Rate = 0.002 +/- 0.0004
[Fri Oct 28 08:55:40 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 08:55:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 08:55:40 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 08:55:40 2011] Source does appear to be extended
[Fri Oct 28 08:55:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 08:55:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 08:55:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 08:55:57 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Oct 28 08:55:57 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.221
[Fri Oct 28 08:55:57 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.87"
[Fri Oct 28 08:55:58 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 08:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02952_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 08:55:58 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 08:55:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02952_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 08:55:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02952_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02952_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:55:58 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 08:55:58 2011] fullrun_ccd0_acisf02952_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 08:55:58 2011] Fit fullrun_ccd0_acisf02952_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 28 08:56:06 2011] Spatial fit model total counts = 23.303100, observed total counts = 25.000000
[Fri Oct 28 08:56:06 2011] Offset between fit and detection position for source 3 = 0.269170 pixels
[Fri Oct 28 08:56:06 2011] 24.381610 total counts/ 2.700010 bgd. counts: snr = 13.194977
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.269170 pixels
  Position = (766.5, 236.4) = 17 45 54.43 -28 58 16.9
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 21.7 +/- 4.9
  Background counts = 2.7
  Rate = 0.002 +/- 0.0004
[Fri Oct 28 08:56:06 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 08:56:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 08:56:06 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 08:56:06 2011] Source does appear to be extended
[Fri Oct 28 08:56:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 08:56:22 2011] Not overwriting source region fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 28 08:56:22 2011] Extracting stamp from image fullrun_ccd0_acisf02952_pi14-548_cl_sm2.00.img.gz, (725, 195) - (808, 277)
[Fri Oct 28 08:56:22 2011] Writing fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3.gif
[Fri Oct 28 08:56:29 2011] ../../acisf02952/products/events/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_src.evt and ../../acisf02952/products/events/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 28 08:56:29 2011] Size of ../../acisf02952/products/events/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_src.evt.gz[events] = 22 counts
[Fri Oct 28 08:56:29 2011] Mean chipx,y = (736.45, 824.05)
[Fri Oct 28 08:56:29 2011] Mean tdetx,y = (3885.05, 4395.55)
[Fri Oct 28 08:56:29 2011] chipx,y range = (718.00-754.00, 808.00-840.00)
[Fri Oct 28 08:56:29 2011] Size of ../../acisf02952/products/events/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 33 counts
[Fri Oct 28 08:56:29 2011] ../../acisf02952/products/images/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_src.img and ../../acisf02952/products/images/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 28 08:56:29 2011] ../../acisf02952/products/spectra/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_src.pi and ../../acisf02952/products/spectra/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 28 08:56:29 2011] Not generating rmf since there are only 21 counts
[Fri Oct 28 08:56:31 2011] ../../acisf02952/products/lightcurves/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_src.lc and ../../acisf02952/products/lightcurves/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 28 08:57:04 2011] 198.181
[Fri Oct 28 08:59:04 2011] Updating aperture counts using extracted products
[Fri Oct 28 08:59:04 2011] Error reading totcts from fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 28 08:59:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 08:59:04 2011] Using photon index=1.80, rate=0.00183, arf fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3.arf
[Fri Oct 28 08:59:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 08:59:04 2011] Updating source flux to 2.8e-14
[Fri Oct 28 08:59:07 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 08:59:08 2011] acisf02952/analysis//spectral/fullrun_ccd0_acisf02952_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete