[Sat Sep 24 13:58:34 2011] Detection parameters:
  Position = (160.5, 526.3) = 17 44 59.54 -28 51 24.4
  Extent = 2.9" x 2.7", rotation angle = 6 degrees
  Source counts = 59.3 +/- 14.0
  Background counts = 137.7
  Rate = 0.002 +/- 0.0004

[Sat Sep 24 13:58:35 2011] Off-axis axis estimate = 12.62'
[Sat Sep 24 14:00:34 2011] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:34 2011] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Sep 24 14:00:34 2011] source mask rpix=14.5, npix_max = 900, mask sum = 900, frac = 1.000
[Sat Sep 24 14:00:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.13"
[Sat Sep 24 14:00:34 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 14:00:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02943_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:00:34 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 14:00:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02943_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:00:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02943_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02943_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:35 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 14:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02943_pi14-548_cl_pass0_tfrozen_src1.csv
[Sat Sep 24 14:00:35 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:00:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02943_pi14-548_cl_pass0_tfrozen_src1.csv
[Sat Sep 24 14:00:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02943_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02943_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:10 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 82.130864 pixels away
[Sat Sep 24 14:01:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:01:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:01:10 2011] Assessing source extent using major
[Sat Sep 24 14:01:10 2011] Source does appear to be extended
[Sat Sep 24 14:01:10 2011] Computing asymmetry using major and minor axis, asym = 1.09
[Sat Sep 24 14:01:50 2011] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:50 2011] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Sep 24 14:01:50 2011] source mask rpix=14.5, npix_max = 900, mask sum = 900, frac = 1.000
[Sat Sep 24 14:01:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.13"
[Sat Sep 24 14:01:51 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 14:01:51 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 14:01:51 2011] Fit fullrun_ccd6_acisf02943_pi14-548_cl_pass1_src1 appears to have run properly
[Sat Sep 24 14:01:52 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 14:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02943_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Sep 24 14:01:52 2011] fullrun_ccd6_acisf02943_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02943_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Sep 24 14:01:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02943_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02943_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:02:15 2011] Spatial fit model total counts = 501.687000, observed total counts = 501.000000
[Sat Sep 24 14:02:15 2011] Offset between fit and detection position for source 2 = 7.363308 pixels
[Sat Sep 24 14:02:15 2011] 504.390000 total counts/ 213.333000 bgd. counts: snr = 19.927326
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 7.363308 pixels
  Position = (153.5, 524.3) = 17 44 59.83 -28 51 25.7
  Extent = 14.3 (14.2-28.5)" x 8.5 (8.5-8.5)", rotation angle = 94 (79-116) degrees
  Source counts = 291.1 +/- 22.5
  Background counts = 213.3
  Rate = 0.008 +/- 0.0006
[Sat Sep 24 14:02:15 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:15 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:15 2011] Source does appear to be extended
[Sat Sep 24 14:02:15 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.67
[Sat Sep 24 14:02:15 2011] Source is asymmetric
[Sat Sep 24 14:10:23 2011] Not overwriting source region fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_src.reg
[Sat Sep 24 14:10:23 2011] Extracting stamp from image fullrun_ccd6_acisf02943_pi14-548_cl_sm2.00.img.gz, (0, 0) - (806, 1177)
[Sat Sep 24 14:10:23 2011] Writing fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2.gif
[Sat Sep 24 14:10:27 2011] ../../acisf02943/products/events/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_src.evt and ../../acisf02943/products/events/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Sep 24 14:10:27 2011] Size of ../../acisf02943/products/events/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_src.evt.gz[events] = 705 counts
[Sat Sep 24 14:10:27 2011] Mean chipx,y = (485.17, 983.33)
[Sat Sep 24 14:10:27 2011] Mean tdetx,y = (3360.17, 2685.33)
[Sat Sep 24 14:10:27 2011] chipx,y range = (363.00-617.00, 916.00-1023.00)
[Sat Sep 24 14:10:27 2011] Size of ../../acisf02943/products/events/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 5214 counts
[Sat Sep 24 14:10:27 2011] ../../acisf02943/products/images/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_src.img and ../../acisf02943/products/images/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Sep 24 14:10:27 2011] ../../acisf02943/products/spectra/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_src.pi and ../../acisf02943/products/spectra/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Sep 24 14:10:30 2011] ../../acisf02943/products/lightcurves/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Sep 24 14:10:33 2011] Keeping rmf generated by specextract
[Sat Sep 24 14:10:33 2011] 130.306
[Sat Sep 24 14:10:44 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:44 2011] Error reading totcts from fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Sep 24 14:10:44 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:44 2011] Using photon index=1.80, rate=0.00767, arf fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2.arf
[Sat Sep 24 14:10:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:44 2011] Updating source flux to 1.7e-13
[Sat Sep 24 14:11:47 2011] Reading fit data from acisf02943/analysis//spectral/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_pl.csv
[Sat Sep 24 14:11:47 2011] Spectral fit parameter nH value = 7.86506e+21
[Sat Sep 24 14:11:47 2011] Spectral fit parameter PhoIndex value = 1.92545
[Sat Sep 24 14:11:47 2011] Failed to get F(0.3-8.0) from acisf02943/analysis//spectral/fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 14:11:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:11:47 2011] Using Nh = 7.9e+21, photon index=1.93, rate=0.00767, arf fullrun_ccd6_acisf02943_pi14-548_pass1_cl_src2.arf
[Sat Sep 24 14:11:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:11:47 2011] Updating source flux to 1.4e-13