[Sat Sep 24 13:58:26 2011] Detection parameters:
  Position = (57.2, 953.5) = 17 45 41.43 -29 0 27.0
  Extent = 0.9" x 0.7", rotation angle = 166 degrees
  Source counts = 38.8 +/- 8.8
  Background counts = 39.2
  Rate = 0.001 +/- 0.0002

[Sat Sep 24 13:58:29 2011] Off-axis axis estimate = 0.26'
[Sat Sep 24 14:00:28 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:28 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Sep 24 14:00:28 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.274
[Sat Sep 24 14:00:28 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.41"
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src21.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src21.csv
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src21_1.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src21.csv
[Sat Sep 24 14:00:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Sep 24 14:00:32 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Sep 24 14:01:10 2011] Spatial fit model total counts = 220.687000, observed total counts = 221.000000
[Sat Sep 24 14:01:10 2011] Offset between fit and detection position for source 95 = 1.242050 pixels
[Sat Sep 24 14:01:10 2011] 229.069800 total counts/ 202.730000 bgd. counts: snr = 1.849922
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 1.242050 pixels
  Position = (58.0, 954.4) = 17 45 41.41 -29 0 26.7
  Extent = 0.6 (0.3-1.3)", rotation angle = 0
  Source counts = 26.3 +/- 15.1
  Background counts = 202.7
  Rate = 0.0007 +/- 0.0004
[Sat Sep 24 14:01:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:01:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:01:10 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:01:10 2011] Source does appear to be extended
[Sat Sep 24 14:01:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:45 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Sep 24 14:01:45 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.911
[Sat Sep 24 14:01:45 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.65"
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src21.ximg exists
[Sat Sep 24 14:01:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src21.csv
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src21_1.ximg exists
[Sat Sep 24 14:01:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src21.csv
[Sat Sep 24 14:01:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:50 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sat Sep 24 14:01:50 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Sep 24 14:01:50 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Sep 24 14:02:14 2011] Spatial fit model total counts = 235.999000, observed total counts = 236.000000
[Sat Sep 24 14:02:14 2011] Offset between fit and detection position for source 95 = 0.013649 pixels
[Sat Sep 24 14:02:14 2011] 243.448900 total counts/ 216.266000 bgd. counts: snr = 1.848424
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 0.013649 pixels
  Position = (58.0, 954.4) = 17 45 41.42 -29 0 26.7
  Extent = 0.7 (0.4-1.4)", rotation angle = 0
  Source counts = 27.2 +/- 15.6
  Background counts = 216.3
  Rate = 0.0007 +/- 0.0004
[Sat Sep 24 14:02:14 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:14 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:14 2011] Source does appear to be extended
[Sat Sep 24 14:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:07:14 2011] Not overwriting source region fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_src.reg
[Sat Sep 24 14:07:14 2011] Extracting stamp from image fullrun_ccd3_acisf02943_pi14-548_cl_sm2.00.img.gz, (28, 924) - (88, 985)
[Sat Sep 24 14:07:14 2011] Writing fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95.gif
[Sat Sep 24 14:08:20 2011] ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_src.evt and ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_bgd.evt exist, delete to re-create
[Sat Sep 24 14:08:20 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_src.evt.gz[events] = 109 counts
[Sat Sep 24 14:08:20 2011] Mean chipx,y = (993.51, 981.82)
[Sat Sep 24 14:08:20 2011] Mean tdetx,y = (4150.18, 4054.51)
[Sat Sep 24 14:08:20 2011] chipx,y range = (972.00-1013.00, 963.00-1002.00)
[Sat Sep 24 14:08:20 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_bgd.evt.gz[events] = 794 counts
[Sat Sep 24 14:08:20 2011] ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_src.img and ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_bgd.img exist, delete to re-create
[Sat Sep 24 14:08:20 2011] ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_src.pi and ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_bgd.pi exist, delete to re-create
[Sat Sep 24 14:08:20 2011] Not generating rmf since there are only 27 counts
[Sat Sep 24 14:08:23 2011] ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_bgd.lc exist, delete to re-create
[Sat Sep 24 14:10:22 2011] 206.765
[Sat Sep 24 14:10:43 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:43 2011] Error reading totcts from fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95_src.pi.gz
[Sat Sep 24 14:10:44 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:44 2011] Using photon index=1.80, rate=0.000716, arf fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src95.arf
[Sat Sep 24 14:10:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:44 2011] Updating source flux to 1.1e-14
[Sat Sep 24 14:11:03 2011] Source 95 has fewer than 100.000000 counts, skipping spectral fitting