[Sat Sep 24 13:58:20 2011] Detection parameters:
  Position = (290.6, 848.4) = 17 45 32.67 -29 1 18.6
  Extent = 0.7" x 0.6", rotation angle = 42 degrees
  Source counts = 32.1 +/- 6.2
  Background counts = 6.9
  Rate = 0.0008 +/- 0.0002

[Sat Sep 24 13:58:29 2011] Off-axis axis estimate = 2.07'
[Sat Sep 24 14:00:28 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:28 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sat Sep 24 14:00:28 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.168
[Sat Sep 24 14:00:28 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.44"
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src25.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src25.csv
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src25_1.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src25.csv
[Sat Sep 24 14:00:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Sep 24 14:00:32 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Sep 24 14:01:10 2011] Spatial fit model total counts = 47.975600, observed total counts = 48.000000
[Sat Sep 24 14:01:10 2011] Offset between fit and detection position for source 39 = 0.393873 pixels
[Sat Sep 24 14:01:10 2011] 48.349700 total counts/ 21.337800 bgd. counts: snr = 5.847636
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.393873 pixels
  Position = (290.8, 848.8) = 17 45 32.68 -29 1 18.7
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 27.0 +/- 7.0
  Background counts = 21.3
  Rate = 0.0007 +/- 0.0002
[Sat Sep 24 14:01:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:01:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:01:10 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:01:10 2011] Source does appear to be extended
[Sat Sep 24 14:01:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:45 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Sat Sep 24 14:01:45 2011] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.669
[Sat Sep 24 14:01:45 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.36"
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src25.ximg exists
[Sat Sep 24 14:01:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src25.csv
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src25_1.ximg exists
[Sat Sep 24 14:01:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src25.csv
[Sat Sep 24 14:01:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:50 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Sat Sep 24 14:01:50 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Sep 24 14:01:50 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Sep 24 14:02:14 2011] Spatial fit model total counts = 47.975600, observed total counts = 48.000000
[Sat Sep 24 14:02:14 2011] Offset between fit and detection position for source 39 = 0.000005 pixels
[Sat Sep 24 14:02:14 2011] 48.349600 total counts/ 21.337500 bgd. counts: snr = 5.847720
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.000005 pixels
  Position = (290.8, 848.8) = 17 45 32.68 -29 1 18.7
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 27.0 +/- 7.0
  Background counts = 21.3
  Rate = 0.0007 +/- 0.0002
[Sat Sep 24 14:02:14 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:14 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:14 2011] Source does appear to be extended
[Sat Sep 24 14:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:07:14 2011] Not overwriting source region fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_src.reg
[Sat Sep 24 14:07:14 2011] Extracting stamp from image fullrun_ccd3_acisf02943_pi14-548_cl_sm2.00.img.gz, (274, 833) - (307, 865)
[Sat Sep 24 14:07:14 2011] Writing fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39.gif
[Sat Sep 24 14:08:33 2011] ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_src.evt and ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_bgd.evt exist, delete to re-create
[Sat Sep 24 14:08:33 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_src.evt.gz[events] = 29 counts
[Sat Sep 24 14:08:33 2011] Mean chipx,y = (792.79, 821.79)
[Sat Sep 24 14:08:33 2011] Mean tdetx,y = (4310.21, 3853.79)
[Sat Sep 24 14:08:33 2011] chipx,y range = (776.00-810.00, 804.00-838.00)
[Sat Sep 24 14:08:33 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 19 counts
[Sat Sep 24 14:08:33 2011] ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_src.img and ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_bgd.img exist, delete to re-create
[Sat Sep 24 14:08:33 2011] ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_src.pi and ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_bgd.pi exist, delete to re-create
[Sat Sep 24 14:08:33 2011] Not generating rmf since there are only 27 counts
[Sat Sep 24 14:08:36 2011] ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_bgd.lc exist, delete to re-create
[Sat Sep 24 14:10:22 2011] 203.052
[Sat Sep 24 14:10:43 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:43 2011] Error reading totcts from fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39_src.pi.gz
[Sat Sep 24 14:10:44 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:44 2011] Using photon index=1.80, rate=0.000711, arf fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src39.arf
[Sat Sep 24 14:10:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:44 2011] Updating source flux to 1.1e-14
[Sat Sep 24 14:11:03 2011] Source 39 has fewer than 100.000000 counts, skipping spectral fitting