[Sat Sep 24 13:58:19 2011] Detection parameters:
  Position = (160.8, 834.6) = 17 45 37.54 -29 1 25.4
  Extent = 0.6" x 0.5", rotation angle = 52 degrees
  Source counts = 22.3 +/- 5.4
  Background counts = 6.7
  Rate = 0.0006 +/- 0.0001

[Sat Sep 24 13:58:29 2011] Off-axis axis estimate = 1.38'
[Sat Sep 24 14:00:28 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:28 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Sep 24 14:00:28 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.906
[Sat Sep 24 14:00:28 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 0.39"
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src35.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src35.csv
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src35_1.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src35.csv
[Sat Sep 24 14:00:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Sep 24 14:00:32 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Sat Sep 24 14:01:10 2011] Spatial fit model total counts = 53.999500, observed total counts = 54.000000
[Sat Sep 24 14:01:10 2011] Offset between fit and detection position for source 35 = 0.733233 pixels
[Sat Sep 24 14:01:10 2011] 52.933800 total counts/ 32.234800 bgd. counts: snr = 3.645750
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.733233 pixels
  Position = (161.5, 835.0) = 17 45 37.53 -29 1 25.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 20.7 +/- 7.3
  Background counts = 32.2
  Rate = 0.0005 +/- 0.0002
[Sat Sep 24 14:01:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:01:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:01:10 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:01:10 2011] Source does appear to be extended
[Sat Sep 24 14:01:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:45 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Sep 24 14:01:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.895
[Sat Sep 24 14:01:45 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.39"
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src35.ximg exists
[Sat Sep 24 14:01:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src35.csv
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src35_1.ximg exists
[Sat Sep 24 14:01:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src35.csv
[Sat Sep 24 14:01:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:50 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Sat Sep 24 14:01:50 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Sep 24 14:01:50 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Sep 24 14:02:14 2011] Spatial fit model total counts = 52.999500, observed total counts = 53.000000
[Sat Sep 24 14:02:14 2011] Offset between fit and detection position for source 35 = 0.007880 pixels
[Sat Sep 24 14:02:14 2011] 51.675200 total counts/ 31.011600 bgd. counts: snr = 3.710598
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.007880 pixels
  Position = (161.5, 835.0) = 17 45 37.53 -29 1 25.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 20.7 +/- 7.2
  Background counts = 31.0
  Rate = 0.0005 +/- 0.0002
[Sat Sep 24 14:02:14 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:14 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:14 2011] Source does appear to be extended
[Sat Sep 24 14:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:07:14 2011] Not overwriting source region fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_src.reg
[Sat Sep 24 14:07:14 2011] Extracting stamp from image fullrun_ccd3_acisf02943_pi14-548_cl_sm2.00.img.gz, (144, 817) - (179, 853)
[Sat Sep 24 14:07:15 2011] Writing fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35.gif
[Sat Sep 24 14:09:05 2011] ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_src.evt and ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Sat Sep 24 14:09:05 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_src.evt.gz[events] = 25 counts
[Sat Sep 24 14:09:05 2011] Mean chipx,y = (926.44, 839.92)
[Sat Sep 24 14:09:05 2011] Mean tdetx,y = (4292.08, 3987.44)
[Sat Sep 24 14:09:05 2011] chipx,y range = (909.00-940.00, 823.00-857.00)
[Sat Sep 24 14:09:05 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 44 counts
[Sat Sep 24 14:09:05 2011] ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_src.img and ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Sat Sep 24 14:09:05 2011] ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_src.pi and ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Sat Sep 24 14:09:05 2011] Not generating rmf since there are only 20 counts
[Sat Sep 24 14:09:08 2011] ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Sat Sep 24 14:10:22 2011] 205.569
[Sat Sep 24 14:10:43 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:43 2011] Error reading totcts from fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35_src.pi.gz
[Sat Sep 24 14:10:44 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:44 2011] Using photon index=1.80, rate=0.000544, arf fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src35.arf
[Sat Sep 24 14:10:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:44 2011] Updating source flux to 8.2e-15
[Sat Sep 24 14:11:03 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting