[Sat Sep 24 13:58:18 2011] Detection parameters:
  Position = (240.0, 762.3) = 17 45 34.57 -29 2 1.0
  Extent = 0.8" x 0.7", rotation angle = 124 degrees
  Source counts = 59.9 +/- 8.2
  Background counts = 8.1
  Rate = 0.002 +/- 0.0002

[Sat Sep 24 13:58:29 2011] Off-axis axis estimate = 2.23'
[Sat Sep 24 14:00:28 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:00:28 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sat Sep 24 14:00:28 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.737
[Sat Sep 24 14:00:28 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.46"
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src11.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 14:00:29 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Sep 24 14:00:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 14:00:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Sep 24 14:00:32 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Sep 24 14:00:32 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Sep 24 14:01:10 2011] Spatial fit model total counts = 72.014100, observed total counts = 72.000000
[Sat Sep 24 14:01:10 2011] Offset between fit and detection position for source 24 = 0.837349 pixels
[Sat Sep 24 14:01:10 2011] 72.269700 total counts/ 20.170200 bgd. counts: snr = 11.600547
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.837349 pixels
  Position = (240.6, 762.9) = 17 45 34.57 -29 2 1.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 52.1 +/- 8.5
  Background counts = 20.2
  Rate = 0.001 +/- 0.0002
[Sat Sep 24 14:01:10 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:01:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:01:10 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:01:10 2011] Source does appear to be extended
[Sat Sep 24 14:01:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:01:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:01:45 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sat Sep 24 14:01:45 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.898
[Sat Sep 24 14:01:45 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.53"
[Sat Sep 24 14:01:48 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src11.ximg exists
[Sat Sep 24 14:01:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src11.csv
[Sat Sep 24 14:01:48 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Sep 24 14:01:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src11.csv
[Sat Sep 24 14:01:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02943_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Sep 24 14:01:49 2011] fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Sep 24 14:01:49 2011] Fit fullrun_ccd3_acisf02943_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Sep 24 14:02:14 2011] Spatial fit model total counts = 71.997400, observed total counts = 72.000000
[Sat Sep 24 14:02:14 2011] Offset between fit and detection position for source 24 = 0.009485 pixels
[Sat Sep 24 14:02:14 2011] 71.515700 total counts/ 19.609800 bgd. counts: snr = 11.721418
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.009485 pixels
  Position = (240.6, 762.9) = 17 45 34.57 -29 2 1.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 51.9 +/- 8.5
  Background counts = 19.6
  Rate = 0.001 +/- 0.0002
[Sat Sep 24 14:02:14 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:02:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:02:14 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:02:14 2011] Source does appear to be extended
[Sat Sep 24 14:02:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:07:14 2011] Not overwriting source region fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_src.reg
[Sat Sep 24 14:07:14 2011] Extracting stamp from image fullrun_ccd3_acisf02943_pi14-548_cl_sm2.00.img.gz, (216, 738) - (265, 787)
[Sat Sep 24 14:07:14 2011] Writing fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24.gif
[Sat Sep 24 14:07:49 2011] ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_src.evt and ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sat Sep 24 14:07:49 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_src.evt.gz[events] = 59 counts
[Sat Sep 24 14:07:49 2011] Mean chipx,y = (862.78, 746.92)
[Sat Sep 24 14:07:49 2011] Mean tdetx,y = (4385.08, 3923.78)
[Sat Sep 24 14:07:49 2011] chipx,y range = (847.00-883.00, 732.00-766.00)
[Sat Sep 24 14:07:49 2011] Size of ../../acisf02943/products/events/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 51 counts
[Sat Sep 24 14:07:49 2011] ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_src.img and ../../acisf02943/products/images/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_bgd.img exist, delete to re-create
[Sat Sep 24 14:07:49 2011] ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_src.pi and ../../acisf02943/products/spectra/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sat Sep 24 14:07:49 2011] Not generating rmf since there are only 51 counts
[Sat Sep 24 14:07:52 2011] ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_src.lc and ../../acisf02943/products/lightcurves/fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sat Sep 24 14:10:21 2011] 203.726
[Sat Sep 24 14:10:43 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:10:43 2011] Error reading totcts from fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24_src.pi.gz
[Sat Sep 24 14:10:43 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:10:43 2011] Using photon index=1.80, rate=0.00137, arf fullrun_ccd3_acisf02943_pi14-548_pass1_cl_src24.arf
[Sat Sep 24 14:10:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:10:43 2011] Updating source flux to 2.1e-14
[Sat Sep 24 14:11:03 2011] Source 24 has fewer than 100.000000 counts, skipping spectral fitting